Research and application progress of welding technology under extreme conditions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Engineering and Environmental Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Wharry JP, Salvati E. Advanced welding and joining technologies—a commentary. Mater Today Commun. 2023;35: 105563. https://doi.org/10.1016/j.mtcomm.2023.105563.10.1016/j.mtcomm.2023.105563 ↗
2. Jeong SE, Yoon JW. Intermetallic compound transformation and mechanical strength of Ni-Sn transient liquid phase sinter-bonded joints in an extreme high-temperature environment. J Mater Sci-Mater El. 2022;33(9):6616–26. https://doi.org/10.1007/s10854-022-07836-3.10.1007/s10854-022-07836-3 ↗
3. Wang JN, Wu ZZ, Han B, Zhang T, Zhou BS, Song KL, Jin X, Ren SZ, Chen JR, Zhao XN. Exploration on the materials quality control of railway vehicle weld structure based on service safety demand. J Phys Conf Ser. 2021;2109(1): 012014. https://doi.org/10.1088/1742-6596/2109/1/012014.10.1088/1742-6596/2109/1/012014 ↗
4. Gao XL, Chen C. High-strength joining of silica glass and 2024 aluminum alloy by ultrasonic-assisted soldering with Sn-Bi low temperature solder. J Manuf Process. 2023;101:1482–96. https://doi.org/10.1016/j.jmapro.2023.07.010.10.1016/j.jmapro.2023.07.010 ↗
5. Zhang HY, Chen C. Research on material flow in flat clinching process and joint failure mechanism. J Cent South Univ. 2023;30:3975–90. https://doi.org/10.1007/s11771-023-5502-6.10.1007/s11771-023-5502-6 ↗
6. Wu YM, Wan YQ, Shi YJ, Jiang JJ. Effects of low temperature on properties of structural steels. J Univ Sci Technol Beijing. 2004;11(5):442–8.
7. Kodur VKR, Dwaikat MMS. Effect of high temperature creep on the fire response of restrained steel beams. Mater Struct. 2010;43(10):1327–41. https://doi.org/10.1617/s11527-010-9583-y.10.1617/s11527-010-9583-y ↗
8. Murty KL. Role and significance of source hardening in radiation embrittlement of iron and ferritic steels. J Nucl Mater. 1999;270(1–2):115–28. https://doi.org/10.1016/S0022-3115(98)00766-1.10.1016/S0022-3115(98)00766-1 ↗
9. New scientific factors in industry.1918. Nature 102, 32–34. https://doi.org/10.1038/102032b0.10.1038/102032b0 ↗
10. Ma B, Gao XD, Huang YJ, Gao PP, Zhang YX. A review of laser welding for aluminium and copper dissimilar metals. Opt Laser Technol. 2023;167: 109721. https://doi.org/10.1016/j.optlastec.2023.109721.10.1016/j.optlastec.2023.109721 ↗
11. Meng XC, Huang YG, Cao J, Shen JJ, Santos DJF. Recent progress on control strategies for inherent issues in friction stir welding. Prog Mater Sci. 2021;115: 100706. https://doi.org/10.1016/j.pmatsci.2020.100706.10.1016/j.pmatsci.2020.100706 ↗
12. Lange A, Widomski P, Kaszuba M, Boryczko B. Influence of gas shielding type and welding parameters on weld geometry and selected properties of welded joints from INCONEL 600. Archiv Civ Mech Eng. 2022;22(4):150. https://doi.org/10.1007/s43452-022-00470-0.10.1007/s43452-022-00470-0 ↗
13. Zhan XH, Yu HS, Feng XS, Pan P, Liu ZM. A comparative study on laser beam and electron beam welding of 5A06 aluminum alloy. Mater Res Express. 2019;6(5):056563. https://doi.org/10.1088/2053-1591/ab0562.10.1088/2053-1591/ab0562 ↗
14. Jiang M, Chen X, Chen YB, Tao W. Mitigation of porosity defects in fiber laser welding under low vacuum. J Mater Process Technol. 2020;276: 116385. https://doi.org/10.1016/j.jmatprotec.2019.116385.10.1016/j.jmatprotec.2019.116385 ↗
15. Zhou ZW, Li HJ, Chen C. Microstructural transformation and mechanical properties of Cu-sputtered alumina ceramic/Zn5Al/AA2024 ultrasonic soldering joints. Intermetallics. 2024;165: 108153. https://doi.org/10.1016/j.intermet.2023.108153.10.1016/j.intermet.2023.108153 ↗
16. Chen J, Chen Q, Wu CS. Study of high-speed pulsed gas metal arc welding assisted by external magnetic-field. Sci Technol Weld Joining. 2020;25(7):564–70. https://doi.org/10.1080/13621718.2020.1774994.10.1080/13621718.2020.1774994 ↗
17. Rhode M, Richter T, Schroepfer D, Manzoni AM, Schneider M, Laplanche G. Welding of high-entropy alloys and compositionally complex alloys—an overview. Weld World. 2021;65(8):1645–59. https://doi.org/10.1007/s40194-021-01110-6.10.1007/s40194-021-01110-6 ↗
18. Bond D, Lussoli RJ, Neto JBR, D’Oliveira ASCM. Co-based superalloy (Stellite 6) powder with added nanoparticles to be molten by PTA. Soldag Insp. 2020;25:E2514. https://doi.org/10.1590/0104-9224/SI25.14.10.1590/0104-9224/SI25.14 ↗
19. Li YX, Chen C, Yi RX, He L. The brazing of Al2O3 ceramic and other materials. Int J Adv Manuf Technol technology.2022; 120: 9–84. https://doi.org/10.1007/s00170-022-08789-x.10.1007/s00170-022-08789-x ↗
20. Ren XQ, Chen C. Analysis of mechanical properties and defect failure of clinched joints for joining AA5052 sheets with sandwich structures. J Market Res. 2023;25:5650–62. https://doi.org/10.1016/j.jmrt.2023.06.242.10.1016/j.jmrt.2023.06.242 ↗
21. Suita Y, Tanaka K, Ohtani M, Shobako S, Terajima N, Noboru T, Hiraoka N. Technique to prevent metal deposition on optical components in space diode laser welding for space applications. Trans Jpn Soc Aeronaut Space Sci. 2011;4(183):67–73. https://doi.org/10.2322/tjsass.54.67.10.2322/tjsass.54.67 ↗
22. Xue ZH, Liu JG, Wu CC, Tong YC. Review of in-space assembly technologies. Chinese J Aeronaut. 2021;34(11):21–47. https://doi.org/10.1016/j.cja.2020.09.043.10.1016/j.cja.2020.09.043 ↗
23. Liu XM, Dong QL, Wang PF, Chen H. Review of electron beam welding technology in space environment. Optik. 2020;225: 165720. https://doi.org/10.1016/j.ijleo.2020.165720.10.1016/j.ijleo.2020.165720 ↗
24. Nogi K, Aoki Y, Fujii H, Nakata K. Behavior of bubbles in weld under microgravity. Acta Mater. 1998;46(12):4405–14. https://doi.org/10.1016/S1359-6454(98)00084-6.10.1016/S1359-6454(98)00084-6 ↗
25. Kim S, Damle N, Mudawar I, Hartwig J. Cryogenic flow boiling in microgravity: Effects of reduced gravity on two-phase fluid physics and heat transfer. Int J Heat Mass Transf. 2024;218: 124751. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124751.10.1016/j.ijheatmasstransfer.2023.124751 ↗
26. Fragomeni JM, Nunes AC. A study of the effects of welding parameters on electron beam welding in the space environment. Aerosp Sci Technol. 2003;7(5):373–84. https://doi.org/10.1016/S1270-9638(03)00031-2.10.1016/S1270-9638(03)00031-2 ↗
27. Luo Y, Wu W, Wu GF, Ye H. Influence of gravity state upon bubble flow in the deep penetration molten pool of vacuum electron beam welding. Vacuum. 2013;89:26–34. https://doi.org/10.1016/j.vacuum.2012.08.008.10.1016/j.vacuum.2012.08.008 ↗
28. Krichel T, Olschok S, Reisgen U. Influence of working pressure on laser beam welding in vacuum of electrical steel sheets. Vacuum. 2023;207: 111659. https://doi.org/10.1016/j.vacuum.2022.111659.10.1016/j.vacuum.2022.111659 ↗
29. Ma XT, Xu SM, Wang FF, Zhao YB, Meng XC, Xie YM, Wan L, Huang YX. Effect of temperature and material flow gradients on mechanical performances of friction stir welded AA6082-T6 joints. Materials. 2022;15(9):6579. https://doi.org/10.3390/ma15196579.10.3390/ma15196579 ↗
30. Smith T. Review, analyses, and recommendations related to modern international use of nuclear space technologies with focus on united states and russia. J Br Interplanet Soc. 2012;65(11–12):360–72.
31. Qi H, Shi QS, Qian YH, Li YM, Xu JJ, Xu CH, Zhang Z, Xie XB. The atomic oxygen erosion resistance effect and mechanism of the perhydropolysilazane-derived SiOx coating used on polymeric materials in space environment. Polymers. 2022;14(2):322. https://doi.org/10.3390/polym14020322.10.3390/polym14020322 ↗
32. Tong PY, Wei Q, Hu N, Chen XG. Asynchronous synergistic damage effect of atomic oxygen and space micro debris on kapton film. Coatings. 2022;12(2):179. https://doi.org/10.3390/coatings12020179.10.3390/coatings12020179 ↗
33. Jing PY, Wang HJ, Chen WA, Chen L, Yin HZ, Wu HJ, Li DY. Effect of Ti addition on microstructure and tribological properties of laser cladding Ni35/WC coating in an oxygen-free environment. Surf Coat Technol. 2022;440: 128480. https://doi.org/10.1016/j.surfcoat.2022.128480.10.1016/j.surfcoat.2022.128480 ↗
34. Long WM, Liu DS, Wu AP, Wang DC, Huang GQ. Influence of laser scanning speed on the formation property of laser brazing diamond coating. Diam Relat Mater. 2020;110: 108085. https://doi.org/10.1016/j.diamond.2020.108085.10.1016/j.diamond.2020.108085 ↗
35. Liu Y, Liu ZM. Correlation of reflected plasma angle and weld pool thermal state in plasma arc welding process. J Manuf Process. 2022;75:1111–22. https://doi.org/10.1016/j.jmapro.2022.01.066.10.1016/j.jmapro.2022.01.066 ↗
36. Nunes AC, Russell C, Bhat B, Fragomeni JM. Assessment of molten metal detachment hazards for electron beam welding in the space environment: Analysis and Test Results.
37. Bunton PH. Particulate electron beam weld emission hazards in space. 1996.
38. Fragomeni JM. An assessment of molten metal detachment hazards during electron beam welding in the space Shuttle Bay at LEO for the international space welding experiment.1996.
39. Jogender S, Anil K, Namhyun K. Welding in space. Adv Mater Process. 2005;163(6):54–7.
40. Xiao QS, Han X, Pei YF. Ultra-low temperature effect on electron beam welding process. IOP Conf Ser Mater Sci Eng. 2020;2020(770): 012067. https://doi.org/10.1088/1757-899X/770/1/012067.10.1088/1757-899X/770/1/012067 ↗
41. Das D, Pratihar DK, Roy GG. Effects of space charge on weld geometry and cooling rate during electron beam welding of stainless steel. Optik. 2020;206: 163722. https://doi.org/10.1016/j.ijleo.2019.163722.10.1016/j.ijleo.2019.163722 ↗
42. Zhai YT, Huang B, Zhang JY, Zhang BR, Liu SJ, Huang QY. Effect of weld spacing on microstructure and mechanical properties of CLAM electron beam welding joints. Fusion Eng Des. 2016;112:440–9. https://doi.org/10.1016/j.fusengdes.2016.06.027.10.1016/j.fusengdes.2016.06.027 ↗
43. McCay TD, Bible JB, Mueller RM, McCay MH, Sharp CM, Hopkins JA. Space applications industrial laser system (SAILS). 25th Plasmadynamics and Lasers Conference. (Colorado Springs, CO, USA.).1994. https://doi.org/10.2514/6.1994-2448.10.2514/6.1994-2448 ↗
44. Gong JF, Peng GC, Li LQ, Xia HB, Meng SH, Wang JM. Effect of plasma plume produced by vacuum laser welding on energy transmission. Opt Laser Technol. 2021;136: 106744. https://doi.org/10.1016/j.optlastec.2020.106744.10.1016/j.optlastec.2020.106744 ↗
45. Suita Y, Tabakodani E, Sugiyama S, Terajima N, Tsukuda Y, Fujisawa S, Imagawa K. Development of space DL welding process for construction and repair of space structures in Space. Trans Jpn Soc Aeronaut Space Sci. 2005;48(160):86–91. https://doi.org/10.2322/tjsass.48.86.10.2322/tjsass.48.86 ↗
46. Luo Y, Tang XH, Lu FG, Chen QT, Cui HC. Effect of subatmospheric pressure on plasma plume in fiber laser welding. J Mater Process Technol. 2015;215:219–24. https://doi.org/10.1016/j.jmatprotec.2014.08.011.10.1016/j.jmatprotec.2014.08.011 ↗
47. Suita Y, Tsukuda Y, Terajima N, Hatta T, Kono T, Inokuma R, Kawata K, Oji T, Nishikawa H, Yoshida K, Masubuchi K. Gas hollow tungsten arc welding experiments in aircraft borne simulated space environment. Weld Int. 2001;15(2):100–7. https://doi.org/10.1080/09507110109549325.10.1080/09507110109549325 ↗
48. Suita Y, Matsushita K, Terajima N. Arc initiation phenomena by space GHTA welding process using touch start technique in a vacuum. Weld Int. 2006;20(9):707–12. https://doi.org/10.1533/wint.2006.3652.10.1533/wint.2006.3652 ↗
49. Suita Y, Ohara M, Sogawa H, Matsushita K, Shobako S, Terajima N, Tsukuda Y, Masubuchi K, Yamauchi S. Welding experiments of aluminium pipe by space GHTA welding in aircraft-borne simulated space environment. Weld Int. 2009;23(5):369–75. https://doi.org/10.1080/09507110802542767.10.1080/09507110802542767 ↗
50. Cho DW, Lee SH, Na SJ. Characterization of welding arc and weld pool formation in vacuum gas hollow tungsten arc welding. J Mater Process Technol. 2013;213(2):143–52. https://doi.org/10.1016/j.jmatprotec.2012.09.024.10.1016/j.jmatprotec.2012.09.024 ↗
51. Prater T. Welding in space: a comparative evaluation of candidate welding technologies and lessons learned from on-orbit experiments. J Br Interplanet Soc. 2015;68(1):33–46.
52. Ding J, Carter B, Lawless K, Nunes A, Russell C et al. A decade of friction stir welding R and D at NASA’s Marshall Space Flight Center and a glance into the future. (NASA Marshall Space Flight Center). 2019.
53. Daly S, Hardyman M, Ragan J, Toombs J, Prater T, Grugel NR. MMaJIC, an experimental chamber for investigating soldering and brazing in microgravity. Gravit Space Res. 2017;5(2):28–34. https://doi.org/10.2478/gsr-2017-0008.10.2478/gsr-2017-0008 ↗
54. Ting W, Wu YF, Chong G, Jiang SY. Feasibility study on feeding wire electron beam brazing of pure titanium using an electron gun for space welding. Vacuum. 2020;180:109575. https://doi.org/10.1016/j.vacuum.2020.10957.10.1016/j.vacuum.2020.10957 ↗
55. Flom Y. Brazing in space: enabling the next frontier. Weld J. 2005;84(10):25–9.
56. Zheng W, Qiao GF. Brazing of SiC ceramic with extraterrestrial regolith simulant in ISRU and ISRF applications. Adv Space Res. 2022;70(3):752–61. https://doi.org/10.1016/j.asr.2022.05.015.10.1016/j.asr.2022.05.015 ↗
57. Jacoby BR. Fundamental mechanisms affecting friction welding under vacuum. Naval Postgraduate School at California in USA. 2018.
58. Abbasi M, Baghei B. New attempt to improve friction stir brazing. Mater Lett. 2021;304:10688. https://doi.org/10.1016/j.matlet.2021.130688.10.1016/j.matlet.2021.130688 ↗
59. Ouyang X, Zhang HY, Chen C. Recycling of scrap sheet material enhanced joining mechanical properties of aluminum alloys by a novel auxiliary sheet flat-clinching process. J Mater Res Technol. 2023;25:4609–21. https://doi.org/10.1016/j.jmrt.2023.06.209.10.1016/j.jmrt.2023.06.209 ↗
60. Sahoo A, Tripathy S. Development in plasma arc welding process: a review. Mater Today Proc. 2021;41(2):363–8. https://doi.org/10.1016/j.matpr.2020.09.562.10.1016/j.matpr.2020.09.562 ↗
61. Lv XQ, Qu ZQ, Su HY, Xu LY, Jing HY. Study on arc characteristics of different defects in pulsed micro-plasma arc welding. J Mater Process Technol. 2022;302: 117514. https://doi.org/10.1016/j.jmatprotec.2022.117514.10.1016/j.jmatprotec.2022.117514 ↗
62. Trydell K, Persson KA, Fuertes N, Siewert E, Hussary N, Pfreuntner M, Bengtsson P, Janiak P, Vishnu R, Frodigh M. Ferrite fraction in duplex stainless steel welded with a novel plasma arc torch. Weld World. 2023;67(3):805–17. https://doi.org/10.1007/s40194-022-01447-6.10.1007/s40194-022-01447-6 ↗
63. Song Y, Chai MY, Han ZL, Liu P. High-temperature tensile and creep behavior in a crmov steel and weld metal. Materials. 2021;15(1):109. https://doi.org/10.3390/ma15010109.10.3390/ma15010109 ↗
64. Yang B, Xuan FZ. Creep behavior of subzones in a CrMoV weldment characterized by the in-situ creep test with miniature specimens. Mater Sci Eng A. 2018;723:148–56. https://doi.org/10.1016/j.msea.2018.03.051.10.1016/j.msea.2018.03.051 ↗
65. Xue BQ, Tan JB, Zhang ZY, Wang X, Wu XQ, Han EH, Ke W. Effect of temperature on low cycle fatigue behavior of T91 steel in liquid lead-bismuth eutectic environment at 150–550°C. Int J Fatigue. 2023;167: 107344. https://doi.org/10.1016/j.ijfatigue.2022.107344.10.1016/j.ijfatigue.2022.107344 ↗
66. Ma L, Guo J, Liu QY, Wang WJ. Fatigue crack growth and damage characteristics of high-speed rail at low ambient temperature. Eng Fail Anal. 2017;82:802–15. https://doi.org/10.1016/j.engfailanal.2017.07.026.10.1016/j.engfailanal.2017.07.026 ↗
67. Burns JT, Gupta VK, Agnew SR, Gangloff RP. Effect of low temperature on fatigue crack formation and microstructure-scale propagation in legacy and modern Al-Zn-Mg-Cu alloys. Int J Fatigue. 2013;55:268–75.10.1016/j.ijfatigue.2013.06.025 ↗
68. Bian YY, Guo SQ, Xu YL, Tang K, Lu XG, Ding WZ. Recovery of rare earth elements from permanent magnet scraps by pyrometallurgical process. Rare Met. 2022;41(5):1697–702. https://doi.org/10.1007/s12598-015-0554-x.10.1007/s12598-015-0554-x ↗
69. Guo Z, Jia X, Qiao W. Mechanical properties of butt weldments made with Q345B steel and E5015 Elec trodes at different temperatures. J Mater Civil Eng. 2019;31(9):04019185. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002845.10.1061/(ASCE)MT.1943-5533.0002845 ↗
70. Huang YY, Luo XW, Zhan YC, Chen Y, Yu LP, Feng W, Xiong JK, Yang JP, Mao GJ, Yang L, Nie FH. High-temperature creep rupture behavior of dissimilar welded joints in martensitic heat resistant steels. Eng Fract Mech. 2022;273: 108739. https://doi.org/10.1016/j.engfracmech.2022.108739.10.1016/j.engfracmech.2022.108739 ↗
71. Peˇsiˇcka J, Kuˇzel R, Dronhofer A, Eggeler G. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels. Acta Mater. 2003;51(16):4847–62.10.1016/S1359-6454(03)00324-0 ↗
72. Kumar R, Varma A, Kumar YR, Jain J, Neelakantan S. Microstructure anomaly upon high temperature exposure and its influence on the mechanical properties of a modified 9Cr-1Mo steel weld. Mater Charact. 2022;189: 111937. https://doi.org/10.1016/j.matchar.2022.111937.10.1016/j.matchar.2022.111937 ↗
73. Sung HJ, Moon JH, Jang MJ, Kim HS, Kim S-J. Microstructural and finite element analysis of creep failure in dissimilar weldment between 9Cr and 2.25 Cr heat-resistant steels. Metall Mater Trans A. 2018;49(11):5323–32. https://doi.org/10.1007/s11661-018-4859-x.10.1007/s11661-018-4859-x ↗
74. Cao J, Gong Y, Yang Z-G. Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels. Mater Sci Eng A. 2011;528(19–20):6103–11. https://doi.org/10.1016/j.msea.2011.04.057.10.1016/j.msea.2011.04.057 ↗
75. Forni D, Chiaia B, Cadoni E. High strain rate response of S355 at high temperatures. Mater Des. 2016;94:467–78. https://doi.org/10.1016/j.matdes.2015.12.160.10.1016/j.matdes.2015.12.160 ↗
76. Borgioli F. The corrosion behavior in different environments of austenitic stainless steels subjected to thermochemical surface treatments at low temperatures: an overview. Metals. 2023;13(4):776. https://doi.org/10.3390/met13040776.10.3390/met13040776 ↗
77. Stephens RI, Chung JH, Glinka G. Low temperature fatigue behavior of steels—a review. SAE Trans. 1979;88:1892–904. https://doi.org/10.4271/790517.10.4271/790517 ↗
78. Shul’ginov BS, Matveyev VV. Impact fatigue of low-alloy steels and their welded joints at low temperature. Int J Fatigue. 1997;19(8):621–7. https://doi.org/10.1016/S0142-1123(97)00066-2.10.1016/S0142-1123(97)00066-2 ↗
79. Liao XW, Wang YQ, Qian XD, Shi YJ. Fatigue crack propagation for Q345qD bridge steel and its butt welds at low temperatures. Fatigue Fract Eng Mater Struct. 2018;41(3):675–87. https://doi.org/10.1111/ffe.12727.10.1111/ffe.12727 ↗
80. Jeong D, Park T, Lee J, Kim S. Ambient and cryogenic S-N fatigue behavior of Fe15Mn steel and its weld. Met Mater Int. 2015;21:453–60. https://doi.org/10.1007/s12540-015-4397-7.10.1007/s12540-015-4397-7 ↗
81. Peral LB, Zafra A, Blasón S, Rodríguez C, Belzunce J. Effect of hydrogen on the fatigue crack growth rate of quenched and tempered crmo and crmov steels. Int J Fatigue. 2019;120:201–14. https://doi.org/10.1016/j.ijfatigue.2018.11.015.10.1016/j.ijfatigue.2018.11.015 ↗
82. Fu RD, Wu SF, Zhou WH, Zhang WH, Yang YQ, Zhang FC. Effects of heat treatment processes on microstructure and properties of 2.25Cr-1Mo-0.25V HSLA steels. Mater Sci Technol. 2009;25:50–5. https://doi.org/10.1179/174328407X213143.10.1179/174328407X213143 ↗
83. Jiang ZH, Wang P, Li DZ, Li YY. The evolutions of microstructure and mechanical properties of 2.25Cr-1Mo-0.25V steel with different initial microstructures during tempering. Mater Sci Eng A. 2017;699:165–75. https://doi.org/10.1016/j.msea.2017.05.095.10.1016/j.msea.2017.05.095 ↗
84. Turichin G, Kuznetsov M, Sokolov M, Salminen A. Hybrid laser arc welding of X80 steel: influence of welding speed and preheating on the microstructure and mechanical properties. Phys Procedia. 2015;78:35–44. https://doi.org/10.1016/j.phpro.2015.11.015.10.1016/j.phpro.2015.11.015 ↗
85. Sklenička V, Kuchařová K, Svobodová M, Kvapilová M, Král P, Horváth L. Creep properties in similar weld joint of a thick-walled P92 steel pipe. Mater Charact. 2016;119:1–12. https://doi.org/10.1016/j.matchar.2016.06.033.10.1016/j.matchar.2016.06.033 ↗
86. Bae S, Kim Y, Liu SP. A study on creep and mechanical properties at high temperature of SMAW welds for a Cr–Mo-X steel. Weld World. 2023;67(9):2153–62. https://doi.org/10.1007/s40194-023-01560-0.10.1007/s40194-023-01560-0 ↗
87. Lee EH, Yoo MH, Byun TS, Hunn JD, Farrell K, Mansur LK. On the origin of deformation microstructures in austenitic stainless steel: Part II—mechanisms. Acta Mater. 2001;49(16):3277–87. https://doi.org/10.1016/S1359-6454(01)00194-X.10.1016/S1359-6454(01)00194-X ↗
88. Lee EH, Byun TS, Hunn JD, Yoo MH, Farrell K, Mansur LK. On the origin of deformation microstructures in austenitic stainless steel: part I—microstructures. Acta Mater. 2001;49(16):3269–76. https://doi.org/10.1016/S1359-6454(01)00193-8.10.1016/S1359-6454(01)00193-8 ↗
89. Cárcel-Carrasco FJ, Pascual-Guillamón M, Pérez-Puig MA. Effects of X-rays radiation on AISI 304 stainless steel weldings with AISI 316L filler material: a study of resistance and pitting corrosion behavior. Metals. 2016;6(5):102. https://doi.org/10.3390/met6050102.10.3390/met6050102 ↗
90. Sun LB, Wang MQ, Huang LJ, Fang NW, Wu PB, Huang RS, Xu K, Wang XX, Qin J, Li S, Long WM. Comparative study on laser welding thick-walled TC4 titanium alloy with flux-cored wire and cable Wire. Metals. 2023;16(4):369. https://doi.org/10.3390/ma16041509.10.3390/ma16041509 ↗
91. Zhang XH, Hatter K, Chen YX, Shao L, Li J, Sun C, Yu KY, Li N, Taheri ML, Wang HY, Wang J, Nastasi M. Radiation damage in nanostructured materials. Progr Mater Sci. 2018;96:217–321. https://doi.org/10.1016/j.pmatsci.2018.03.002.10.1016/j.pmatsci.2018.03.002 ↗
92. Arora H, Basha KM, Abhishek DN, Devesh B. Welding simulation of circumferential weld joint using TIG welding process. Materials Today: Proceedings. 2022;50:923–9. https://doi.org/10.1016/j.matpr.2021.06.315.10.1016/j.matpr.2021.06.315 ↗
93. Venkateswaran S, Mageshwaran G, Balakrishnan K, Bharadwaj RR, Saiteja R, Sasipraba T, Subramaniam P, Jayaprabakar J, Joy N, Anish M, Ganesan S, Kavitha KR. Experimental investigation on the strength of dissimilar joints between MONEL400 and stainless steel using pulsed TIG and interpulsed TIG welding. AIP Conf Proc. 2020;2311(1):1–9. https://doi.org/10.1063/5.0034414.10.1063/5.0034414 ↗
94. Aqeel M, Gautam JP, Shariff SM. Comparative study on autogenous diode laser, CO2 laser-MIG hybrid and multi-pass TIG welding of 10-mm thick Inconel 617 superalloy. Mater Sci Eng A. 2022;856: 143967. https://doi.org/10.1016/j.msea.2022.143967.10.1016/j.msea.2022.143967 ↗
95. Vidyarthy R, Dwivedi DK. Activating flux tungsten inert gas welding for enhanced weld penetration. J Manuf Process. 2016;22:211–28. https://doi.org/10.1016/j.jmapro.2016.03.012.10.1016/j.jmapro.2016.03.012 ↗
96. Tanaka M, Tashiro S, Kashima T, Lowke JJ, Murphy AB. A CO2 gas shielded gas tungsten arc and its application to welding of steel sheets. Mater Sci Forum. 2007;539:3926–30. https://doi.org/10.4028/0-87849-428-6.3926.10.4028/0-87849-428-6.3926 ↗
97. Kumar A, Sundarrajan S. Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments. Mater Des. 2009;30(4):1288–97. https://doi.org/10.1016/j.matdes.2008.06.055.10.1016/j.matdes.2008.06.055 ↗
98. Yu WW, Fan MY, Shi JH, Xue F, Chen X, Liu H. A comparison between fracture toughness at different locations of SMAW and GTAW welded joints of primary coolant piping. Eng Fract Mech. 2018;202:135–46. https://doi.org/10.1016/j.engfracmech.2018.09.021.10.1016/j.engfracmech.2018.09.021 ↗
99. Yu WW, Fan MY, Jia WQ, Xue F, Yu M, Liu H, Chen X. Thermal aging effect on the tensile and fatigue properties of the narrow-gap TIG welded joints in offshore floating nuclear power plants. Int J Fatigue. 2019;126:143–54. https://doi.org/10.1016/j.ijfatigue.2019.05.002.10.1016/j.ijfatigue.2019.05.002 ↗
100. Wang RR, Welsch GE. Joining titanium materials with tungsten inert gas welding, laser welding, and infrared brazing. J Prosthet Dent. 1995;74(5):521–30. https://doi.org/10.1016/S0022-3913(05)80356-7.10.1016/S0022-3913(05)80356-7 ↗