article·2019-08-01

Effect of ultrasonic impact treatment on the microstructure and mechanical properties of diffusion-bonded TC11 alloy joints

Zhenwen Yang, Qi Liu, Jiahui Wang, Zongqing Ma, Ying Wang, Dongpo Wang

Publisher page

Abstract

To derive the higher mechanical properties of diffusion-bonded joints at a low bonding temperature, ultrasonic impact treatment (UIT) was used to increase the dislocations and refine the microstructure of faying surfaces prior to diffusion bonding. The results show that a deformation layer with a thickness of 30 μm formed near the impacted TC11 alloy surface, with many dislocation tangles, substructures, and dislocation cells in this layer. Diffusion bonding experiments were performed for both original samples and UIT samples. For the original TC11 alloy, the average shear strength of the diffusion-bonded joints increased with an increase in the bonding temperature, and the joint strength was 550 MPa for joints bonded at 820 °C for 30 min under a pressure of 10 MPa. However, the average shear strength of the TC11 alloy joints with UIT reached 560 MPa for the joint that was diffusion-bonded at 780 °C, whereas it was only 370 MPa for the joint without UIT. Therefore, UIT of the alloy surface resulted in a joint with a high strength at a relatively low bonding temperature, which may be beneficial to inhibit the grain growth caused by the high temperature bonding process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Surface Treatment and Residual Stress · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.