journal article·2023-12-18

Development of a rotary cutting test system and drilling experiment for rock mass

Qi Wang, Songlin Cai, Bei Jiang, Hongke Gao, Chong Zhang, Fenglin Ma

Publisher page

Abstract

The mechanical parameters of a rock mass are the basis for studying the deformation and failure mechanisms and control methods of the surrounding rock in underground engineering. At present, these parameters are mainly obtained through laboratory tests of cores obtained from surrounding rock in the field. It is difficult to core the broken surrounding rock, and a rock core is detached from an environment with on-site stress. The rock mass drilling test can provide a new method to solve the above problems. This paper has developed a rotary cutting test system for rock mass (RCT system) for research on the relationships between drilling parameters and rock mechanics parameters. The basic characteristics and structure of the RCT system were introduced, digital drilling tests of different rock mass specimens were conducted for various control parameters and different bit types. The relationships between drilling parameters, and the response law of drilling parameters to rock mechanics parameters and drill bit structural parameters during rock drilling were systematically analyzed. The research lays a foundation of equipment and theory for implementing testing of rock mass parameters while drilling.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Drilling and Well Engineering · Tunneling and Rock Mechanics · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Fakhimi A, Hemami B. Axial splitting of rocks under uniaxial compression. Int J Rock Mech Min Sci. 2015;79:124–34. https://doi.org/10.1016/j.ijrmms.2015.08.013.10.1016/j.ijrmms.2015.08.013 ↗
2. Arora K, Chakraborty T, Rao KS. Experimental study on stiffness degradation of rock under uniaxial cyclic sinusoidal compression loading. Rock Mech Rock Eng. 2019;52(11):4785–97. https://doi.org/10.1007/s00603-019-01835-3.10.1007/s00603-019-01835-3 ↗
3. Zhao Z, Zhou XP. Rapid uniaxial compressive strength assessment by microstructural properties using X-ray CT imaging and virtual experiments. Arch Civ Mech Eng. 2021;21:46. https://doi.org/10.1007/s43452-021-00191-w.10.1007/s43452-021-00191-w ↗
4. Jiang B, Xin ZX, Zhang XF, Deng YS, Wang MZ, Li SD, Ren WT. Mechanical properties and influence mechanism of confined concrete arches in high-stress tunnels. Int J Min Sci Tech. 2023;33(7):829–41. https://doi.org/10.1016/j.ijmst.2023.03.008.10.1016/j.ijmst.2023.03.008 ↗
5. Kong R, Feng XT, Zhang XW, Yang CX. Study on crack initiation and damage stress in sandstone under true triaxial compression. Int J Rock Mech Min Sci. 2018;106:117–23. https://doi.org/10.1016/j.ijrmms.2018.04.019.10.1016/j.ijrmms.2018.04.019 ↗
6. Nezhad MG, Tabarsa A, Latifi N. Effect of natural and synthetic fibers reinforcement on California bearing ratio and tensile strength of clay. J Rock Mech Geotech Eng. 2021;13:626–42. https://doi.org/10.1016/j.jrmge.2021.01.004.10.1016/j.jrmge.2021.01.004 ↗
7. Liu ZL, Ma CD, Wei XN, Xie WB. Experimental study of rock subjected to triaxial extension. Rock Mech Rock Eng. 2022;55:1069–77. https://doi.org/10.1007/s00603-021-02660-3.10.1007/s00603-021-02660-3 ↗
8. Miguel ABN, Pierre B, Roland G. Application of wave equation theory to improve dynamic cone penetration test for shallow soil characterization. J Rock Mech Geotech Eng. 2022;14(1):289–302. https://doi.org/10.1016/j.jrmge.2021.07.004.10.1016/j.jrmge.2021.07.004 ↗
9. Stone KJL, Kyambadde BS. Determination of strength and index properties of fine-grained soils using a soil minipenetrometer. J Geotech Geoenviron Eng. 2007;113(6):667–73. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:6(667).10.1061/(ASCE)1090-0241(2007)133:6(667) ↗
10. Heidari M, Khanlari GR, Kaveh MT, Kargarian S. Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mech Rock Eng. 2012;45:265–73. https://doi.org/10.1007/s00603-011-0196-8.10.1007/s00603-011-0196-8 ↗
11. Merve S, Resat U, Hasan K. Point load strength index of half-cut core specimens and correlation with uniaxial compressive strength. Rock Mech Rock Eng. 2020;53(4):3745–60. https://doi.org/10.1007/s00603-020-02137-9.10.1007/s00603-020-02137-9 ↗
12. Basu A, Aydin A. Technical note predicting uniaxial compressive strength by point load test: significance of cone penetration. Rock Mech Rock Eng. 2006;39(5):483–90. https://doi.org/10.1007/s00603-006-0082-y.10.1007/s00603-006-0082-y ↗
13. Archer JW, Dobbs MR, Aydin A, Reeves HJ, Prance RJ. Measurement and correlation of acoustic emissions and pressure stimulated voltages in rock using an electric potential sensor. Int J Rock Mech Min Sci. 2016;89:26–33. https://doi.org/10.1016/j.ijrmms.2016.08.002.10.1016/j.ijrmms.2016.08.002 ↗
14. Xu DP, Zhou YY, Qiu SL. Elastic modulus deterioration index to identify the loosened zone around underground openings. Tunn Undergr Space Technol. 2018;82:20–8. https://doi.org/10.1016/j.tust.2018.07.032.10.1016/j.tust.2018.07.032 ↗
15. Uyanık O, Sabbağ N, Uyanık NA, Öncü Z. Prediction of mechanical and physical properties of some sedimentary rocks from ultrasonic velocities. B Eng Geol Environ. 2019;78:6003–16. https://doi.org/10.1007/s10064-019-01501-6.10.1007/s10064-019-01501-6 ↗
16. Patel A. Characterization of cavities in rocks using drilling parameters. Int J Rock Mech Min Sci. 2013;63:122–30. https://doi.org/10.1016/j.ijrmms.2013.08.014.10.1016/j.ijrmms.2013.08.014 ↗
17. Kahraman S, Bilgin N, Feridunoglu C. Dominant rock properties affecting the penetration rate of percussive drills. Int J Rock Mech Min Sci. 2003;40(5):711–23. https://doi.org/10.1016/S1365-1609(03)00063-7.10.1016/S1365-1609(03)00063-7 ↗
18. He MM, Li N, Zhu JW, Chen YS. Advanced prediction for field strength parameters of rock using drilling operational data from impregnated diamond bit. J Pet Sci Eng. 2020;187: 106847. https://doi.org/10.1016/j.petrol.2019.106847.10.1016/j.petrol.2019.106847 ↗
19. Yue ZQ, Lee C, Law KT, Tham LG. Automatic monitoring of rotary-percussive drilling for ground characterization-illustrated by a case example in Hong Kong. Int J Rock Mech Min Sci. 2004;41:573–612. https://doi.org/10.1016/j.ijrmms.2003.12.151.10.1016/j.ijrmms.2003.12.151 ↗
20. He MM, Zhang Z, Li N. Prediction of fracture frequency and RQD for the fractured rock mass using drilling logging data. B Eng Geol Environ. 2021;80:4547–57. https://doi.org/10.1007/s10064-021-02240-3.10.1007/s10064-021-02240-3 ↗
21. YaSAr E, Ranjith PG, Viete DR. An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material. J Pet Sci Eng. 2011;76:185–93. https://doi.org/10.1016/j.petrol.2011.01.011.10.1016/j.petrol.2011.01.011 ↗
22. Chen J, Yue ZQ. Ground characterization using breaking-action-based zoning analysis of rotary-percussive instrumented drilling. Int J Rock Mech Min Sci. 2015;75:33–43. https://doi.org/10.1016/j.ijrmms.2014.11.008.10.1016/j.ijrmms.2014.11.008 ↗
23. He MM, Li N, Zhang Z. An empirical method for determining the mechanical properties of jointed rock mass using drilling energy. Int J Rock Mech Min Sci. 2019;116:64–74. https://doi.org/10.1016/j.ijrmms.2019.03.010.10.1016/j.ijrmms.2019.03.010 ↗
24. Jiang B, Ma FL, Wang Q, Gao HK, Zhai DH, Deng YS, Xu CJ, Yao LD. Drilling-based measuring method for the c-φ parameter of rock and its field application. Int J Min Sci Technol. 2023. https://doi.org/10.1016/j.ijmst.2023.06.005.10.1016/j.ijmst.2023.06.005 ↗
25. Li N, Li Q, Song L. Acquiring mechanical parameters of rock based on rotational cutting. J Rock Mech Eng (in Chinese). 2015;34(2):323–9.
26. Deng LC, Li XZ, Xu WT, Qiao L, Zhao P. Integrated monitoring of lithology parameters while drilling in small-scale coring platform. Rock Mech Rock Eng. 2022;11:7269–88. https://doi.org/10.1007/s00603-022-02998-2.10.1007/s00603-022-02998-2 ↗
27. Shen Q, Wang YJ, Cao RL, Liu YR. Efficiency evaluation of a percussive drill rig using rate-energy ratio based on rock drilling tests. J Pet Sci Eng. 2022;217: 110873. https://doi.org/10.1016/j.petrol.2022.110873.10.1016/j.petrol.2022.110873 ↗
28. Santiago P, Murat K, Frederic P. Development of a tool condition monitoring system for impregnated diamond bits in rock drilling applications. Rock Mech Rock Eng. 2017;50(5):1289–301. https://doi.org/10.1007/s00603-016-1150-6.10.1007/s00603-016-1150-6 ↗
29. Houssam AA, Ahmed R, Laurent G. Percussive drilling: experimental and numerical investigations. Rock Mech Rock Eng. 2022;55:1555–70. https://doi.org/10.1007/s00603-021-02707-5.10.1007/s00603-021-02707-5 ↗