journal article·2022-06-21

Influence of hook geometry on failure mechanism of Al6061-galvanized steel dissimilar FSW lap joint

Pankaj Kaushik, Dheerendra Kumar Dwivedi

Publisher page

Abstract

In the present article, the seam lap joining of the Al6061 and galvanized steel sheet is carried out using friction stir welding. A unique metallographic feature named `hook` is observed near the stir zone boundary in the weld nugget. The influence of hooks and the related stress zones on fracture of the joint is discussed in brief. Three different types of fracture are observed during tensile shear testing of the welded joints. The mechanisms of the various types of fracture are understood comprehensively. Further, a correlation between the sizes of the hooks and the type of fracture is presented. The optimum size of the advancing side hook was found to be about 8–15% of the plate thickness, and the retreating side to advancing side hook ratio should be greater than 1.5 for a strong and ductile joint. Metallographic and mechanical testing such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, stereo micrography, tensile testing, and microhardness testing were performed to validate the analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Kusuda Y. Honda develops robotized FSW technology to weld steel and aluminum and applied it to a mass-production vehicle. Ind Rob. 2013;40:208–12. https://doi.org/10.1108/01439911311309889.10.1108/01439911311309889 ↗
2. Kaushik P, Dwivedi DK. Effect of tool geometry in dissimilar Al-Steel Friction Stir Welding. J Manuf Process. 2021;68:198–208. https://doi.org/10.1016/j.jmapro.2020.08.007.10.1016/j.jmapro.2020.08.007 ↗
3. Wang S, Zhou B, Zhang X, Sun T, Li G, Cui J. Mechanical properties and interfacial microstructures of magnetic pulse welding joints with aluminum to zinc-coated steel. Mater Sci Eng A. 2020;788: 139425. https://doi.org/10.1016/j.msea.2020.139425.10.1016/j.msea.2020.139425 ↗
4. Kaushik P, Dwivedi DK. Materials today: proceedings Induction preheating in FSW of Al-Steel combination. Mater Today Proc. 2021. https://doi.org/10.1016/j.matpr.2021.01.438.10.1016/j.matpr.2021.01.438 ↗
5. Jiang H, Liao Y, Jing L, Gao S, Li G, Cui J. Mechanical properties and corrosion behavior of galvanized steel/Al dissimilar joints. Arch Civ Mech Eng. 2021;21:168. https://doi.org/10.1007/s43452-021-00320-5.10.1007/s43452-021-00320-5 ↗
6. Wang K, Upadhyay P, Wang Y, Li J, Sun X, Roosendaal T. Investigation of interfacial layer for friction stir scribe welded aluminum to steel joints. J Manuf Sci Eng Trans ASME. 2018;140:1–9. https://doi.org/10.1115/1.4040873.10.1115/1.4040873 ↗
7. Shirazi H, Kheirandish S, Pouraliakbar H. Employing hooking and effective sheet thickness to achieve optimum failure load in lap joints of friction stir welded AA5456 aluminum. Theor Appl Fract Mech. 2020;105: 102423. https://doi.org/10.1016/j.tafmec.2019.102423.10.1016/j.tafmec.2019.102423 ↗
8. Chen K, Liu X, Ni J. Keyhole refilled friction stir spot welding of aluminum alloy to advanced high strength steel. J Mater Process Technol. 2017;249:452–62. https://doi.org/10.1016/j.jmatprotec.2017.06.039.10.1016/j.jmatprotec.2017.06.039 ↗
9. Wang T, Sidhar H, Mishra RS, Hovanski Y, Upadhyay P, Carlson B. Effect of hook characteristics on the fracture behaviour of dissimilar friction stir welded aluminium alloy and mild steel sheets. Sci Technol Weld Join. 2019;24:178–84. https://doi.org/10.1080/13621718.2018.1503801.10.1080/13621718.2018.1503801 ↗
10. Mijajlovic M, Milcic D. Analytical model for estimating the amount of heat generated during friction stir welding: application on plates made of aluminium alloy 2024 T351. Weld Process. 2012;31:8–14. https://doi.org/10.5772/53563.10.5772/53563 ↗
11. Badarinarayan H, Yang Q, Okamoto K. Effect of weld orientation on static strength and failure mode of friction stir stitch welds in lap-shear specimens of aluminium 6022–T4 sheets. Fatig Fract Eng Mater Struct. 2011;34:908–20. https://doi.org/10.1111/j.1460-2695.2011.01584.x.10.1111/j.1460-2695.2011.01584.x ↗
12. Dehghani M, Amadeh A, Akbari Mousavi SAA. Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel. Mater Des. 2013;49:433–41. https://doi.org/10.1016/j.matdes.2013.01.013.10.1016/j.matdes.2013.01.013 ↗
13. Shen Z, Yang X, Yang S, Zhang Z, Yin Y. Microstructure and mechanical properties of friction spot welded 6061–T4 aluminum alloy. Mater Des. 2014;54:766–78. https://doi.org/10.1016/j.matdes.2013.08.021.10.1016/j.matdes.2013.08.021 ↗
14. Tada H, Paris PC, Irwin GR. The stress analysis of cracks handbook. 3rd ed. New York: ASME Press; 2000. https://doi.org/10.1115/1.801535.10.1115/1.801535 ↗
15. Wang S, Xu L, Sun T, Li G, Cui J. Effects of process parameters on mechanical performance and interfacial morphology of electromagnetic pulse welded joints between aluminum and galvanized steel. J Mater Res Technol. 2021;10:552–64. https://doi.org/10.1016/j.jmrt.2020.12.047.10.1016/j.jmrt.2020.12.047 ↗
16. Kaushik P, Dwivedi DK (2022) Al-steel dissimilar joining: Challenges and opportunities. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.05.211.10.1016/j.matpr.2022.05.211 ↗