journal article·2021-08-18

Seismic performance of circular reinforced concrete columns subjected to compression, bending and torsion with low and moderate shear span ratio

Chiyu Jiao, Yang Liu, Biao Wei, Jianzhong Li, Zhangliang Hu, Gexi Zhu

Publisher page

Abstract

Under the action of an earthquake, the piers of urban curved bridges are usually subjected to compression, bending and torsion due to the geometric irregularity and with low and moderate shear-span ratio. To explore the seismic performance of piers under combined actions, this paper made a theoretical analysis on the seismic performance of four circular RC columns under combined action with low and moderate shear-span ratio through experimental research. Taking the shear-span ratio and torsion-bending ratio as the main variables, cyclic bending loading and combined cyclic bending and torsion loading were carried out on the columns, respectively. The results showed that the increase of torsional effect and shear effect will increase the failure height of the piers and weaken the energy dissipation capacity and bearing capacity. Through the extraction of characteristic points in the test data, the relationship between force, displacement and torsion-bending ratio of columns with shear-span ratio below 4 was fitted. The bending and shear restoring force models of columns with spiral stirrups and small torsion-bending ratio were established. Moreover, based on the variable angle truss theory, the concrete improvement coefficient β was introduced, and the formula of torsional bearing capacity of columns under combined actions with low and moderate shear-span ratio was deduced. Compared with the test data, when the value of β was taken as 1.1, the proposed formula could be well applied to the calculation of bearing capacity of piers with torsion-bending ratio below 0.2 under combined actions with low and moderate shear-span ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Amjadian M, Agrawal AK. Rigid-Body motion of horizontally curved bridges subjected to Earthquake-Induced pounding. J Bridge Eng. 2016. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000962.10.1061/(ASCE)BE.1943-5592.0000962 ↗
2. Broderick BM, Elnashai AS. Analysis of the failure of Interstate 10 freeway ramp during the Northridge earthquake of 17 January 1994. Earthq Eng Struct Dyn. 1995;24(2):189–208. https://doi.org/10.1002/eqe.4290240205.10.1002/eqe.4290240205 ↗
3. Sun Z, Wang D, Guo X, Si B, Huo Y. Lessons learned from the damaged Huilan Interchange in the 2008 Wenchuan earthquake. J Bridge Eng. 2012. https://doi.org/10.1061/(ASCE)BE.1943-5592.000021010.1061/(ASCE)BE.1943-5592.0000210 ↗
4. Wang Z, Lee GC (2009) A comparative study of bridge damage due to the Wenchuan, Northridge, Loma Prieta and San Fernando earthquakes. Earthq Eng Eng Vib. 8(2):251–261. https://doi.org/10.1007/s11803-009-9063-y10.1007/s11803-009-9063-y ↗
5. Jiao C, Liu Y, Wu S, Ma Y, Huang J, Liu W (2021) Influence of pounding buffer zone for mitigation of seismic response of curved bridges. Structures. 32. https://doi.org/10.1016/j.istruc.2021.02.04610.1016/j.istruc.2021.02.046 ↗
6. Deng J, Ma ZJ, Liu A, Cao S, Zhang B (2017) Seismic performance of reinforced concrete bridge columns subjected to combined stresses of compression, bending, shear, and torsion. J Bridge Eng. 22(11). https://doi.org/10.1061/(ASCE)BE.1943-5592.000112110.1061/(ASCE)BE.1943-5592.0001121 ↗
7. Li Q, Belarbi A (2013) Damage assessment of square RC bridge columns subjected to torsion combined with axial compression, flexure, and shear. J Civil Eng. 17(3). https://doi.org/10.1007/s12205-013-0600-x10.1007/s12205-013-0600-x ↗
8. Prakash S, Belarbi A, You Y-M (2009) Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear. Eng Struct 2009; 32(1). https://doi.org/10.1016/j.engstruct.2009.08.01410.1016/j.engstruct.2009.08.014 ↗
9. Suriya Prakash, Qian Li, Abdeldjelil Belarbi. Behavior of circular and square reinforced concrete bridge columns under combined loading including torsion. ACI Struct J. 2012; 109(3):317–327.https://doi.org/10.14359/5168374510.14359/51683745 ↗
10. Jiao C, Li J, Wei B, Long P, Xu Y (2019) Experimental investigations on seismic responses of RC circular column piers in curved bridges. Earthq Struct. 17(5).https://doi.org/10.12989/eas.2019.17.5.43510.12989/eas.2019.17.5.435 ↗
11. Yeh Y-K, Mo YL, Yang CY (2002) Seismic performance of rectangular hollow bridge columns. J Struct Eng. 128(1). https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(60)10.1061/(ASCE)0733-9445(2002)128:1(60 ↗
12. Pinto AV, Molina J, Tsionis G (2003) Cyclic tests on large-scale models of existing bridge piers with rectangular hollow cross-section. Earthq Eng Struct Dyn 32. https://doi.org/10.1002/eqe.31110.1002/eqe.311 ↗
13. Xu S-Y, Zhang J. Axial–shear–flexure interaction hysteretic model for RC columns under combined actions. Eng Struct. 2012;34:548–63. https://doi.org/10.1016/j.engstruct.2011.10.023.10.1016/j.engstruct.2011.10.023 ↗
14. Wang P, Han Q, Du X. Seismic performance of circular RC bridge columns with flexure–torsion interaction. Soil Dyn Earthq Eng. 2014;66:13–30. https://doi.org/10.1016/j.soildyn.2014.06.028.10.1016/j.soildyn.2014.06.028 ↗
15. Sezen H, Chowdhury T (2009) Hysteretic model for reinforced concrete columns including the effect of shear and axial load failure. J Struct Eng 135(2). https://doi.org/10.1061/(ASCE)0733-9445(2009)135:2(139)10.1061/(ASCE)0733-9445(2009)135:2(139 ↗
16. Saatcioglu M, Ozcebe G (1989) Response of reinforced concrete columns to simulated seismic loading. ACI Struct J 86(1). https://doi.org/10.14359/260710.14359/2607 ↗
17. Jiao C, Zhu G, Long P, Shi X (2018) Seismic performance of RC circular piers with medium and low shear-span ratio under compression, bending and torsion action. In: 2018 3rd international conference on smart city and systems engineering (ICSCSE). IEEE. 2018; 11.10.1109/ICSCSE.2018.00081 ↗
18. Guiqian L (2010) Experimental research and numerical analysis of seismic performance of reinforced concrete piers. Chongqing Jiaotong University. (In Chinese)
19. Tirasit P, Kawashima K (2007) Seismic performance of square reinforced concrete columns under combined cyclic flexural and torsional loadings. J Earthq Eng 11(3).https://doi.org/10.1080/1363246060103181310.1080/13632460601031813 ↗
20. Yiqiu L (2012) Research on unified calculation model of reinforced concrete members under composite stress. Hunan University. (In Chinese)
21. Ministry of housing and urban rural development of the people's Republic of China (2015) Code for design of concrete structures (GB 50010-2010). China Construction Industry Press.