Effect of water glass coating of tricalcium phosphate granules on in vivo bone formation

Background Recently, some authors introduced a water glass (WG, sodium-silicate glass; Na ₂ O·SiO ₂ ·nH ₂ O) coating over tricalcium phosphate (TCP) bioceramic to modulate its resorption rate and enhance the bone cell behaviors. In this study, four different types of granular samples were prepared to evaluate the ability of new bone formation in vivo using micro-computed tomography and histology. Methods Four types sample groups: group A (pure HA as a negative resorption control); group B (pure TCP as a positive resorption control); group C (WG-coated TCP as an early resorption model); and group D (same as group C but heat-treated at 500°C as a delayed resorption model). Cylindrical tube-type carriers with holes were fabricated with HA by extrusion and sintering. Each carrier was filled densely with each granular sample. Four types of tubes were implanted into the medial femoral condyle and medial tibial condyle of New Zealand White rabbits. Results The HA group (A) showed the lowest amount of new bone formation. All the TCP sample groups (B, C, and D) showed more new bone formation. On the other hand, among the TCP groups, group C (early resorption model) showed slightly more bone formation. The amount of residual bioceramics was most abundant in the HA group (A). All the TCP sample groups showed less residual bioceramics than group A. Among the TCP groups, group C showed slightly more residual bioceramics. Group B showed the lowest amount of residual bioceramics. Conclusions The WG-coated TCP sample (group C) is the best bone substitute candidate because of its proper biodegradation rate and the Si ions release because the WG-coated layer reduces the material resorption and enhances the new bone formation. That is, the WG-coated TCP is believed to be the best material for the application of an artificial bone substitute material.