article·2019-08-01

Aging kinetics and mechanical properties of copper-bearing low-carbon HSLA-100 microalloyed steel

Mohammad Javad Sohrabi, Hamed Mirzadeh, Mohammad Sajad Mehranpour, Ali Heydarinia, R. Razi

Publisher page

Abstract

Abstract The precipitation kinetics of HSLA-100 steel and the correlation between tensile and impact properties were studied. According to the modified Johnson–Mehl–Avrami–Kolmogorov (JMAK) analysis and based on the analysis of the time corresponding to the transformed fraction of 0.5 (t0.5), the activation energy for the precipitation of copper during aging of martensite was determined as ˜111 and 105 kJ/mol, respectively. These values are much smaller than the activation energy for the diffusion of Cu in α-iron, which was related to the effect of high dislocation density of the quenched martensitic microstructure on the aging process. These results were verified based on the diffusional calculations. Based on the analysis of mechanical behavior, no reasonable correlation was found between strength of the material and the impact energy. However, the impact energy was found to be proportional to the UTS-YS, where the latter is an indicator of the work-hardening capability of the material. This revealed that the work-hardening capacity of the material is a much more important factor for determining the impact toughness compared to its strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.