journal article·2023-05-15Open access

Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants

Hamza E. L. Etri, Anil Kumar Singla, Mehmet Tayyip Özdemir, Mehmet Erdi Korkmaz, Recep Demirsöz, Munish Kumar Gupta, J. B. Krolczyk, Nimel Sworna Ross

Abstract

Abstract Titanium and its alloys are widely utilized in the biomedical sector, they still exhibit poor tribological properties and low wear resistance when employed against even weaker substances. The poor hardness, instability, high coefficient of friction, low load-carrying capacity, and insufficient resistance to not only abrasive but also adhesive wear are further disadvantages of titanium alloys. The focus of this investigation is on the tribological performance of Ti-6Al-4 V alloy in contact with WC carbide abrasive balls when subjected to nanodoped cooling and lubrication conditions. Tribological experiments were executed on Ti-6Al-4 V flat samples using a ball-on-flat tribometer in dry hybrid graphene/boron nitride combination nanoparticles (MQL, nano-3), nanographene with MQL (nano-1), and boron nitride with MQL (nano-2) conditions. After that, the most significant tribological characteristics were investigated, including volume loss, friction coefficient, wear rate, and micrographic structures. The outcomes also demonstrated that the hybrid nanoparticle situation experienced the least amount of volume loss.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Lubricants and Their Additives · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Shin Y, Wada K, Tsuchida Y, Ijbara M, Ikeda M, Takahashi H, Iwamoto T. Wear behavior of materials for additive manufacturing after simulated occlusion of deciduous dentition. J Mech Behav Biomed Mater. 2023;138:105627. https://doi.org/10.1016/j.jmbbm.2022.105627.10.1016/j.jmbbm.2022.105627 ↗
2. Wang J, Zhuang W, Liang W, Yan T, Li T, Zhang L, Li S. Inorganic nanomaterial lubricant additives for base fluids, to improve tribological performance: recent developments. Friction. 2022;10:645–76. https://doi.org/10.1007/s40544-021-0511-7.10.1007/s40544-021-0511-7 ↗
3. Godson L, Deepak K, Enoch C, Jefferson B, Raja B. Heat transfer characteristics of silver/water nanofluids in a shell and tube heat exchanger. Arch Civ Mech Eng. 2014;14:489–96. https://doi.org/10.1016/j.acme.2013.08.002.10.1016/j.acme.2013.08.002 ↗
4. Li A, Zhang R, Liu J, Song X. Effect of cutting process adjustment on crystallographic texture of machined surface layer of titanium alloy. Arch Civ Mech Eng. 2022;23:19. https://doi.org/10.1007/s43452-022-00563-w.10.1007/s43452-022-00563-w ↗
5. Wang Y, Tayyebi M, Assari A. Fracture toughness, wear, and microstructure properties of aluminum/titanium/steel multi-laminated composites produced by cross-accumulative roll-bonding process. Arch Civ Mech Eng. 2022;22:49. https://doi.org/10.1007/s43452-021-00355-8.10.1007/s43452-021-00355-8 ↗
6. Philip JT, Mathew J, Kuriachen B. Tribology of Ti6Al4V: a review. Friction. 2019;7:497–536. https://doi.org/10.1007/S40544-019-0338-7.10.1007/S40544-019-0338-7 ↗
7. Djoufack MH, May U, Repphun G, Brögelmann T, Bobzin K. Wear behaviour of hydrogenated DLC in a pin-on-disc model test under lubrication with different diesel fuel types. Tribol Int. 2015;92:12–20. https://doi.org/10.1016/j.triboint.2015.05.020.10.1016/j.triboint.2015.05.020 ↗
8. Jakobsen MO, Herskind ES, Bjerge K, Ahrendt P, Pedersen CF, Knudsen MB. Vibration signatures in ball bearings as a function of lubricant viscosity ratio κ, under alternating lubrication conditions. Tribol Int. 2021;156:106840. https://doi.org/10.1016/j.triboint.2020.106840.10.1016/j.triboint.2020.106840 ↗
9. Gupta MK, Demirsöz R, Korkmaz ME, Ross NS. Wear and friction mechanism of stainless steel 420 under various lubrication conditions: a tribological assessment with ball on flat test. J Tribol. 2023. https://doi.org/10.1115/1.4056423.10.1115/1.4056423 ↗
10. Dwyer-Joyce R. Predicting the abrasive wear of ball bearings by lubricant debris. Wear. 1999;233–235:692–701. https://doi.org/10.1016/S0043-1648(99)00184-2.10.1016/S0043-1648(99)00184-2 ↗
11. Han X, Thrush SJ, Zhang Z, Barber GC, Qu H. Tribological characterization of ZnO nanofluids as fastener lubricants. Wear. 2021;468–469:203592. https://doi.org/10.1016/j.wear.2020.203592.10.1016/j.wear.2020.203592 ↗
12. Şirin Ş, Kıvak T. Effects of hybrid nanofluids on machining performance in MQL-milling of Inconel X-750 superalloy. J Manuf Process. 2021;70:163–76. https://doi.org/10.1016/j.jmapro.2021.08.038.10.1016/j.jmapro.2021.08.038 ↗
13. Yıldırım ÇV. Investigation of hard turning performance of eco-friendly cooling strategies: cryogenic cooling and nanofluid based MQL. Tribol Int. 2020;144:106127. https://doi.org/10.1016/j.triboint.2019.106127.10.1016/j.triboint.2019.106127 ↗
14. Nadolny K, Kieraś S. New approach for cooling and lubrication in dry machining on the example of internal cylindrical grinding of bearing rings. Sustain Mater Technol. 2020;24:e00166. https://doi.org/10.1016/j.susmat.2020.e00166.10.1016/j.susmat.2020.e00166 ↗
15. Zhang D, Du X, Bai A, Wang L. The synergistic effect of MAO-treated and PAO–graphene oil on tribological properties of Ti6Al4V alloys. Wear. 2022;510–511:204494. https://doi.org/10.1016/j.wear.2022.204494.10.1016/j.wear.2022.204494 ↗
16. Rapoport L, Leshchinsky V, Lapsker I, Volovik Y, Nepomnyashchy O, Lvovsky M, Popovitz-Biro R, Feldman Y, Tenne R. Tribological properties of WS2 nanoparticles under mixed lubrication. Wear. 2003;255:785–93. https://doi.org/10.1016/S0043-1648(03)00044-9.10.1016/S0043-1648(03)00044-9 ↗
17. Sasaki A, Kawai S, Honda T, Iwai Y. Measurement of the potential of static electricity generated by the friction of oil lubricated metal on metal. Tribol Trans. 2002;45:55–60. https://doi.org/10.1080/10402000208982521.10.1080/10402000208982521 ↗
18. Wu YY, Tsui WC, Liu TC. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear. 2007;262:819–25. https://doi.org/10.1016/j.wear.2006.08.021.10.1016/j.wear.2006.08.021 ↗
19. Cui X, Li C, Zhang Y, Jia D, Zhao Y, Li R, Cao H. Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant. Int J Adv Manuf Technol. 2019;104:3943–58.10.1007/s00170-019-04129-8 ↗
20. Wan Q, Jin Y, Sun P, Ding Y. Tribological behaviour of a lubricant oil containing boron nitride nanoparticles. Procedia Eng. 2015;102:1038–45. https://doi.org/10.1016/j.proeng.2015.01.226.10.1016/j.proeng.2015.01.226 ↗
21. Mohan N, Sharma M, Singh R, Kumar N. Tribological properties of automotive lubricant SAE 20W–40 containing nano-Al2O3 particles. SAE 2014 Int Powertrain Fuels Lubr Meet. 2014. https://doi.org/10.4271/2014-01-2781.10.4271/2014-01-2781 ↗
22. An J, Shen XX, Lu Y, Liu YB. Microstructure and tribological properties of Al–Pb alloy modified by high current pulsed electron beam. Wear. 2006;261:208–15. https://doi.org/10.1016/j.wear.2005.09.014.10.1016/j.wear.2005.09.014 ↗
23. Liu YZ, Zu XT, He X, Qiu SY, Cao J, Huang XQ. Improvement of tribological behavior of a Ti–Al–Zr alloy by nitrogen ion implantation. Nucl Instruments Methods Phys Res Sect B Beam Interact Mater Atoms. 2006;248:42–6. https://doi.org/10.1016/j.nimb.2006.03.180.10.1016/j.nimb.2006.03.180 ↗
24. Gao T, Li C, Zhang Y, Yang M, Jia D, Jin T, Hou Y, Li R. Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants. Tribol Int. 2019;131:51–63. https://doi.org/10.1016/j.triboint.2018.10.025.10.1016/j.triboint.2018.10.025 ↗
25. Guo Y, Zhang L, Zhao F, Li G, Zhang G. Tribological behaviors of novel epoxy nanocomposites filled with solvent-free ionic SiO2 nanofluids. Compos Part B Eng. 2021;215:108751. https://doi.org/10.1016/j.compositesb.2021.108751.10.1016/j.compositesb.2021.108751 ↗
26. Liu M, Zhang Z, Yang M, Li P, Wang Y, He Y, Yuan J. Novel design of MXene@UiO-66-NH2 hybrid nanofluids towards promoting the mechanical and tribological performance of fabric composites. Compos Part A Appl Sci Manuf. 2022;161:107122. https://doi.org/10.1016/j.compositesa.2022.107122.10.1016/j.compositesa.2022.107122 ↗
27. Mousavi SB, ZeinaliHeris S, Estellé P. Viscosity, tribological and physicochemical features of ZnO and MoS2 diesel oil-based nanofluids: an experimental study. Fuel. 2021;293:120481. https://doi.org/10.1016/j.fuel.2021.120481.10.1016/j.fuel.2021.120481 ↗
28. Korkmaz ME, Gupta MK, Demirsöz R. Understanding the lubrication regime phenomenon and its influence on tribological characteristics of additively manufactured 316 Steel under novel lubrication environment. Tribol Int. 2022;173:107686. https://doi.org/10.1016/j.triboint.2022.107686.10.1016/j.triboint.2022.107686 ↗
29. Sui T, Song B, Zhang F, Yang Q. Effect of particle size and ligand on the tribological properties of amino functionalized hairy silica nanoparticles as an additive to polyalphaolefin. J Nanomater. 2015;2015:1–9. https://doi.org/10.1155/2015/492401.10.1155/2015/492401 ↗
30. Hegab H, Umer U, Deiab I, Kishawy H. Performance evaluation of Ti–6Al–4V machining using nano-cutting fluids under minimum quantity lubrication. Int J Adv Manuf Technol. 2018;95:4229–41. https://doi.org/10.1007/s00170-017-1527-z.10.1007/s00170-017-1527-z ↗
31. Deepika. Nanotechnology implications for high performance lubricants. SN Appl Sci. 2020;2:1128. https://doi.org/10.1007/s42452-020-2916-8.10.1007/s42452-020-2916-8 ↗
32. Li Z, Xu C, Xiao G, Zhang J, Chen Z, Yi M. Lubrication performance of graphene as lubricant additive in 4-n-pentyl-4’-cyanobiphyl Liquid Crystal (5CB) for Steel/Steel contacts. Materials (Basel). 2018. https://doi.org/10.3390/ma11112110.10.3390/ma11112110 ↗
33. Ayala V, Corma A, Iglesias M, Rincón JA, Sánchez F. Boron nitride powder—a high-performance alternative for solid lubrication. J Catal. 2004;224:170–7.10.1016/j.jcat.2004.02.017 ↗
34. Chen Y, Renner P, Liang H. Dispersion of nanoparticles in lubricating oil: a critical review. Lubricants. 2019;7:7. https://doi.org/10.3390/lubricants7010007.10.3390/lubricants7010007 ↗
35. Yang W, He X, Li H, Dong J, Chen W, Xin H, Jin Z. A tribological investigation of SLM fabricated TC4 titanium alloy with carburization pre-treatment. Ceram Int. 2020. https://doi.org/10.1016/j.ceramint.2019.10.004.10.1016/j.ceramint.2019.10.004 ↗
36. Mehrali M, Sadeghinezhad E, TahanLatibari S, Mehrali M, Togun H, Zubir MNM, Kazi SN, Metselaar HSC. Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids. J Mater Sci. 2014;49:7156–71. https://doi.org/10.1007/s10853-014-8424-8.10.1007/s10853-014-8424-8 ↗
37. Elsaid K, Abdelkareem MA, Maghrabie HM, Sayed ET, Wilberforce T, Baroutaji A, Olabi AG. Thermophysical properties of graphene-based nanofluids. Int J Thermofluids. 2021. https://doi.org/10.1016/j.ijft.2021.100073.10.1016/j.ijft.2021.100073 ↗
38. Zhang J, Wu W, Li C, Yang M, Zhang Y, Jia D, Hou Y, Li R, Cao H, Ali HM. Convective heat transfer coefficient model under nanofluid minimum quantity lubrication coupled with cryogenic air grinding Ti–6Al–4V. Int J Precis Eng Manuf Technol. 2021;8:1113–35. https://doi.org/10.1007/s40684-020-00268-6.10.1007/s40684-020-00268-6 ↗
39. Tang C, Bando Y, Huang Y, Zhi C, Golberg D. Synthetic routes and formation mechanisms of spherical boron nitride nanoparticles. Adv Funct Mater. 2008;18:3653–61.10.1002/adfm.200800493 ↗
40. Cao-Romero-Gallegos JA, Farfan-Cabrera LI, Pérez-González J, Marín-Santibáñez BM. Tribological and rheological evaluation of a graphene nanosheets-based lubricant for metal-on-metal and wet clutch interfaces. Mater Lett. 2022;309:131441. https://doi.org/10.1016/j.matlet.2021.131441.10.1016/j.matlet.2021.131441 ↗
41. Vallejo JP, Żyła G, Ansia L, Fal J, Traciak J, Lugo L. Thermophysical, rheological and electrical properties of mono and hybrid TiB2/B4C nanofluids based on a propylene glycol: water mixture. Powder Technol. 2022;395:391–9. https://doi.org/10.1016/j.powtec.2021.09.074.10.1016/j.powtec.2021.09.074 ↗
42. Zhang Y, Li C, Jia D, Zhang D, Zhang X. Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. J Clean Prod. 2015;87:930–40. https://doi.org/10.1016/j.jclepro.2014.10.027.10.1016/j.jclepro.2014.10.027 ↗
43. Kim SH. Understanding the role of nanoparticles in nano-oil lubrication. Tribol Lett. 2009. https://doi.org/10.1007/s11249-009-9441-7.10.1007/s11249-009-9441-7 ↗
44. Singh A, Chauhan P, Mamatha TG. A review on tribological performance of lubricants with nanoparticles additives. Mater Today Proc. 2019;25:586–91. https://doi.org/10.1016/j.matpr.2019.07.245.10.1016/j.matpr.2019.07.245 ↗
45. Sun J, Du S. Application of graphene derivatives and their nanocomposites in tribology and lubrication: a review. RSC Adv. 2019;9:40642–61. https://doi.org/10.1039/c9ra05679c.10.1039/c9ra05679c ↗
46. Kimura Y, Wakabayashi T, Okada K, Wada T, Nishikawa H. Boron nitride as a lubricant additive. Wear. 1999;232:199–206. https://doi.org/10.1016/S0043-1648(99)00146-5.10.1016/S0043-1648(99)00146-5 ↗
47. Demirsöz R, Korkmaz ME, Gupta MK. A novel use of hybrid Cryo-MQL system in improving the tribological characteristics of additively manufactured 316 stainless steel against 100 Cr6 alloy. Tribol Int. 2022;173:107613. https://doi.org/10.1016/j.triboint.2022.107613.10.1016/j.triboint.2022.107613 ↗
48. Setti D, Sinha MK, Ghosh S, Rao PV. Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nano fluids. Int J Mach Tools Manuf. 2015;88:237–48. https://doi.org/10.1016/j.ijmachtools.2014.10.005.10.1016/j.ijmachtools.2014.10.005 ↗