journal article·2021-01-12

Influence of gradient structure on wear characteristics of centrifugally cast functionally graded magnesium matrix composites for automotive applications

Bassiouny Saleh, Jinghua Jiang, Reham Fathi, Qiong Xu, Yuhua Li, Aibin Ma

Publisher page

Abstract

In the past few years, the functionally graded materials (FGMs) have proved useful in many industrial applications such as aerospace, automotive, transportation and infrastructure because of their advantages like the ability to control mechanical properties, residual stresses, wear, and corrosion behavior through a smooth gradation of the elements in a particular direction of the products. In this current work, the microstructural and wear properties of AZ91 alloy reinforced with silicon carbide particles (SiCp) produced through the centrifugal casting method were investigated. Four weight fractions of SiCp with 10 µm average size were used to fabricate functionally graded (FG) tubes in the two mold rotational speeds of 1200 and 1500 rpm. Microstructural, microhardness, and wear tests were used for characterizing the developed FG tubes. From the results obtained, the gradient distribution of SiC particles inside the AZ91 matrix alloy substantially improved hardness and wear resistance for the FG tubes comparing to unreinforced alloy. Moreover, the mold rotational speed is the main factor in controlling the distribution of particles, thus determining the gradient properties of the manufactured FG tubes. These findings suggest that FG tubes are useful for aerospace and automotive applications that require more excellent surface resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Saleh B, et al. 30 Years of functionally graded materials: an overview of manufacturing methods, applications and future challenges. Compos Part B Eng. 2020;201:1–46. https://doi.org/10.1016/j.compositesb.2020.108376.10.1016/j.compositesb.2020.108376 ↗
2. Saleh B, Jiang J, Ma A, Song D, Yang D-H. Effect of main parameters on the mechanical and wear behaviour of functionally graded materials by centrifugal casting: a review. Met Mater Int. 2019;25(6):1395–409. https://doi.org/10.1007/s12540-019-00273-8.10.1007/s12540-019-00273-8 ↗
3. Wang L-S, Jiang J-H, Saleh B, Xie Q-Y, Qiong X, Liu H, Ma A-B. Controlling corrosion resistance of a biodegradable Mg–Y–Zn alloy with LPSO phases via multi-pass ECAP process. Acta Metall Sin Eng Lett. 2020. https://doi.org/10.1007/s40195-020-01042-y.10.1007/s40195-020-01042-y ↗
4. Xu Q, et al. Enhancement of mechanical properties and rolling formability in AZ91 alloy by RD-ECAP processing. Mater (Basel). 2019;12(21):3503. https://doi.org/10.3390/ma12213503.10.3390/ma12213503 ↗
5. Saleh B, et al. Statistical analysis of dry sliding wear process parameters for AZ91 alloy processed by RD-ECAP using response surface methodology. Met Mater Int. 2020. https://doi.org/10.1007/s12540-020-00624-w.10.1007/s12540-020-00624-w ↗
6. Xu Q, et al. Dry sliding wear behavior of AZ91 alloy processed by rotary-die equal channel angular pressing. J Mater Eng Perform. 2020. https://doi.org/10.1007/s11665-020-04883-x.10.1007/s11665-020-04883-x ↗
7. Saleh B, Jiang J, Fathi R, Xu Q, Wang L, Ma A. Study of the microstructure and mechanical characteristics of AZ91–SiCp composites fabricated by stir casting. Arch Civ Mech Eng. 2020. https://doi.org/10.1007/s43452-020-00071-9.10.1007/s43452-020-00071-9 ↗
8. Qiong X, Ma A, Saleh B, Li Y, Yuan Y, Jiang J, Ni C. Enhancement of strength and ductility of SiCp/AZ91 composites by RD-ECAP processing. Mater Sci Eng A. 2019. https://doi.org/10.1016/j.msea.2019.138579.10.1016/j.msea.2019.138579 ↗
9. El-Galy IM, Saleh BI, Ahmed MH. Functionally graded materials classifications and development trends from industrial point of view. SN Appl Sci. 2019;1(11):1378–401. https://doi.org/10.1007/s42452-019-1413-4.10.1007/s42452-019-1413-4 ↗
10. Kieback B, Neubrand A, Riedel H. Processing techniques for functionally graded materials. Mater Sci Eng A. 2003;362:81–105. https://doi.org/10.1016/S0921-5093(03)00578-1.10.1016/S0921-5093(03)00578-1 ↗
11. Zhang C, et al. Additive manufacturing of functionally graded materials: a review. Mater Sci Eng A. 2019;764:9. https://doi.org/10.1016/j.msea.2019.138209.10.1016/j.msea.2019.138209 ↗
12. Chirita G, Soares D, Silva FS. Advantages of the centrifugal casting technique for the production of structural components with Al-Si alloys. Mater Des. 2008;29(1):20–7. https://doi.org/10.1016/j.matdes.2006.12.011.10.1016/j.matdes.2006.12.011 ↗
13. Rahimipour MR, Sobhani M. Evaluation of centrifugal casting process parameters for in situ fabricated functionally gradient Fe-TiC composite. Metall Mater Trans B. 2013;44B:1120–3. https://doi.org/10.1007/s11663-013-9903-z.10.1007/s11663-013-9903-z ↗
14. Watanabe Y, Sato R, Kim I, Miura S, Miura H. Functionally graded material fabricated by a centrifugal method from ZK60A magnesium alloy. Mater Trans. 2005;46(5):944–9.10.2320/matertrans.46.944 ↗
15. Saleh B, Jiang J, Ma A, Song D, Yang D, Xu Q. Review on the influence of different reinforcements on the microstructure and wear behavior of functionally graded aluminum matrix composites by centrifugal casting. Met Mater Int. 2020;26(7):933–60. https://doi.org/10.1007/s12540-019-00491-0.10.1007/s12540-019-00491-0 ↗
16. Vieira AC, Sequeira PD, Gomes JR, Rocha LA. Dry sliding wear of Al alloy/SiCp functionally graded composites: influence of processing conditions. Wear. 2009;267:585–92. https://doi.org/10.1016/j.wear.2009.01.041.10.1016/j.wear.2009.01.041 ↗
17. Prabhu TR. Processing and properties evaluation of functionally continuous graded 7075 Al alloy/SiC composites. Arch Civ Mech Eng. 2017;17(1):20–31. https://doi.org/10.1016/j.acme.2016.08.004.10.1016/j.acme.2016.08.004 ↗
18. EL-Galy IM, Bassiouny BI, Ahmed MH. Characterization of functionally graded Al-SiCp metal matrix composites manufactured by centrifugal casting. Alexandria Eng J. 2017;56(4):371–81. https://doi.org/10.1016/j.aej.2017.03.009.10.1016/j.aej.2017.03.009 ↗
19. EL-Galy IM, Bassiouny BI, Ahmed MH. empirical model for dry sliding wear behaviour of centrifugally cast functionally graded Al/SiCp composite. Key Eng Mater. 2018;786:276–85. https://doi.org/10.4028/www.scientific.net/KEM.786.276.10.4028/www.scientific.net/KEM.786.276 ↗
20. Saleh BI, Ahmed MH. Development of functionally graded tubes based on pure Al/Al2O3 metal matrix composites manufactured by centrifugal casting for automotive applications. Met Mater Int. 2020;26(9):1430–40. https://doi.org/10.1007/s12540-019-00391-3.10.1007/s12540-019-00391-3 ↗
21. Rao AG, Mohape M, Katkar VA, Gowtam DS, Deshmukh VP, Shah AK. Fabrication and characterization of aluminum (6061)- boron carbide functionally gradient material. Mater Manuf Process. 2014. https://doi.org/10.1080/10426910903180037 (no. December 2014).10.1080/10426910903180037 ↗
22. Ramkumar KR, Sivasankaran S, Al-Mufadi FA, Siddharth S, Raghu R. Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–x wt.% TiC composites for aerospace applications. Arch Civ Mech Eng. 2019;19(2):428–38. https://doi.org/10.1016/j.acme.2018.12.003.10.1016/j.acme.2018.12.003 ↗
23. Junus S, Zulfia A. Development of seamless pipe based on Al/Al2O3 composite produced by stir casting and centrifugal casting. Mater Sci Forum. 2016;857:179–82. https://doi.org/10.4028/www.scientific.net/MSF.857.179.10.4028/www.scientific.net/MSF.857.179 ↗
24. Fathi R, Ma A, Saleh B, Xu Q, Jiang J. Investigation on mechanical properties and wear performance of functionally graded AZ91-SiCp composites via centrifugal casting. Mater Today Commun. 2020. https://doi.org/10.1016/j.mtcomm.2020.101169.10.1016/j.mtcomm.2020.101169 ↗
25. Yu W, et al. Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting. J Alloys Compd. 2017;702:199–208. https://doi.org/10.1016/j.jallcom.2017.01.231.10.1016/j.jallcom.2017.01.231 ↗
26. Asgari A, Sedighi M, Krajnik P. Magnesium alloy-silicon carbide composite fabrication using chips waste. J Clean Prod. 2019;232:1187–94. https://doi.org/10.1016/j.jclepro.2019.06.018.10.1016/j.jclepro.2019.06.018 ↗
27. Rajan TPD, Pillai RM, Pai BC. Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites. Mater Charact. 2010;61(10):923–8. https://doi.org/10.1016/j.matchar.2010.06.002.10.1016/j.matchar.2010.06.002 ↗
28. Poddar P, Srivastava VC, De PK, Sahoo KL. Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Mater Sci Eng A. 2007;460–461:357–64. https://doi.org/10.1016/j.msea.2007.01.052.10.1016/j.msea.2007.01.052 ↗
29. Huang SJ, Chen ZW. Grain refinement of AlNp/AZ91D magnesium metal-matrix composites. Kov Mater. 2011;49(4):259–64. https://doi.org/10.4149/km2011.42.59.10.4149/km2011.42.59 ↗
30. Karun AS, Rajan TPD, Pillai UTS, Pai BC, Rajeev VR. Enhancement in tribological behaviour of functionally graded SiC reinforced aluminium composites by centrifugal casting. J Compos Mater. 2016;50:2255–69. https://doi.org/10.1177/0021998315602946.10.1177/0021998315602946 ↗
31. García-Rodríguez S, Torres B, Maroto A, López AJ, Otero E, Rams J. Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites. Wear. 2017;390–391:1–10. https://doi.org/10.1016/j.wear.2017.06.010.10.1016/j.wear.2017.06.010 ↗
32. Kumar KKA, Viswanath A, Rajan TPD, Pillai UTS, Pai BC. Physical, mechanical, and tribological attributes of stir-cast AZ91/SiCp composite. Acta Met Sin (Engl Lett). 2014;27(2):295–305. https://doi.org/10.1007/s40195-014-0045-3.10.1007/s40195-014-0045-3 ↗
33. Xiao P, et al. Tribological behavior of in-situ nanosized TiB2 particles reinforced AZ91 matrix composite. Tribol Int. 2018;128:130–9. https://doi.org/10.1016/j.triboint.2018.07.003.10.1016/j.triboint.2018.07.003 ↗
34. Li J, et al. Tribological behavior of TiC particles reinforced 316Lss composite fabricated using selective laser melting. Mater (Basel). 2019;12(6):1–16. https://doi.org/10.3390/ma12060950.10.3390/ma12060950 ↗