Development of ultrasonic elliptical vibration cutting and its application
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Gu G, Wu S, Wang D, Zhou S, Zhu L, An Q, et al. A review of the research on the variation of tool’s motion trajectory and its influence on the formation mechanism of surface quality in ultrasonic vibration machining. J Manuf Process. 2023;107:294–319.10.1016/j.jmapro.2023.10.025 ↗
2. Yang Z, Zhu L, Zhang G, Ni C, Lin B. Review of ultrasonic vibration-assisted machining in advanced materials. Int J Mach Tools Manuf. 2020;156: 103594.10.1016/j.ijmachtools.2020.103594 ↗
3. Sun YJ, Gong H, Gui SY, Yuan SM, Wang Y. Towards understanding the cutting temperature in ultrasonic vibration-assisted drilling based on the dynamic contact characteristics between the cutting edge and workpiece. Ultrasonics. 2023;135: 107131.10.1016/j.ultras.2023.107131 ↗
4. Arefin S, Zhang X, Kumar AS, Neo DWK, Wang Y. Study of chip formation mechanism in one-dimensional vibration-assisted machining. J Mater Process Technol. 2021;291: 117022.10.1016/j.jmatprotec.2020.117022 ↗
5. Ma C, Shamoto E, Moriwaki T, Zhang Y, Wang L. Suppression of burrs in turning with ultrasonic elliptical vibration cutting. Int J Mach Tools Manuf. 2005;45(11):1295–1300.10.1016/j.ijmachtools.2005.01.011 ↗
6. Li Z, Zhu L, Yang Z, Ma J, Cao W. Investigation of tool-workpiece contact rate and milling force in elliptical ultrasonic vibration assisted milling. Int J Adv Manuf Technol. 2022;118:585–601.10.1007/s00170-021-07946-y ↗
7. Han G, Ye Z, Xu J, Ma Y, Xu C, Zhao X, et al. Investigation on cutting forces and tool wear in high-speed milling of Ti–6Al–4V assisted by longitudinal torsional ultrasonic vibrations. Int J Adv Manuf Technol. 2023;129(1):783–799.10.1007/s00170-023-12306-z ↗
8. Sonia P, Jain JK, Saxena KK. Infl@@@uence of ultrasonic vibration assistance in manufacturing processes: a review. Mater Manuf Processes. 2021;36(13):1451–1475.10.1080/10426914.2021.1914843 ↗
9. Gu G, Wu S, Wang D, Zhang B, Li C, Liang Z. Machining mechanism of metal glass cutting based on ultrasonic vibration tool path. Int J Adv Manuf Technol. 2023;131:2967–2983.10.1007/s00170-023-12818-8 ↗
10. Moriwaki T, Shamoto E. Ultrasonic elliptical vibration cutting. CIRP Ann. 1995;44(1):31–34.10.1016/S0007-8506(07)62269-0 ↗
11. Lu Z, Zhang D, Zhang X, Peng Z. Effects of high-pressure coolant on cutting performance of high-speed ultrasonic vibration cutting titanium alloy. J Mater Process Technol. 2020;279:116584.10.1016/j.jmatprotec.2019.116584 ↗
12. Wang Q, Wu Y, Gu J, Lu D, Ji Y, Nomura M. Fundamental machining characteristics of the in-base-plane ultrasonic elliptical vibration assisted turning of Inconel 718. Procedia CIRP. 2016;42:858–862.10.1016/j.procir.2016.03.008 ↗
13. Duan J, Zou P, Wei S, Yang Z, Wang A. Effect of tool and workpiece geometric parameters on the machining performance of three-drive ultrasonic elliptical vibration-assisted turning. Int J Adv Manuf Technol. 2023;125(7–8):3791–3824.10.1007/s00170-023-10868-6 ↗
14. Yang J, Feng P, Zhang J, Yang H, Wang J. On the oxidation resistance of sinusoidal microstructure fabricated by elliptical vibration cutting. Surf Coat Technol. 2023;459:129370.10.1016/j.surfcoat.2023.129370 ↗
15. Usman MM, Zou P, Tian Y, Wang W. Experimental investigation on surface functional indices in ultrasonic elliptical vibration cutting of C45 carbon steel. Int J Adv Manuf Technol. 2020;109:187–200.10.1007/s00170-020-05661-8 ↗
16. Lu H, Zhu L, Yang Z, Yan B, Hao Y, Qin S. Research on the generation mechanism and interference of surface texture in ultrasonic vibration assisted milling. Int J Mech Sci. 2021;208:106681.10.1016/j.ijmecsci.2021.106681 ↗
17. Zhang C, Cheung CF, Liang X, Bulla B. High-frequency ultrasonic vibration-assisted sculpturing with a smoothed tool path for optical 3D micro-structured surfaces with sharp edges. J Manuf Process. 2023;101:1246–1256.10.1016/j.jmapro.2023.07.002 ↗
18. Jung H, Hayasaka T, Shamoto E, Xu L. Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti–6Al–4V. Precis Eng. 2020;64:98–107.10.1016/j.precisioneng.2020.03.017 ↗
19. Ma CX, Shamoto E, Moriwaki T. Study on the thrust cutting force in ultrasonic elliptical vibration cutting. In: Materials science forum, vol. 471. Zurich: Trans Tech Publ; 2004. p. 396–400.
20. Zhang P, Zhang X, Cao X, Yu X, Wang Y. Analysis on the tool wear behavior of 7050–T7451 aluminum alloy under ultrasonic elliptical vibration cutting. Wear. 2021;466:203538.10.1016/j.wear.2020.203538 ↗
21. Zhang C, Guo P, Ehmann KF, Li Y. Turning of microgrooves both with and without aid of ultrasonic elliptical vibration. Mater Manuf Process. 2015;30(8):1001–1009.10.1080/10426914.2015.1004692 ↗
22. Kurniawan R, Kumaran ST, Ko TJ. Finite element analysis in ultrasonic elliptical vibration cutting (UEVC) during micro-grooving in AISI 1045. Int J Precis Eng Manuf. 2021;22:1497–1515.10.1007/s12541-021-00554-6 ↗
23. He Y, Zou P, Zhu WL, Ehmann KF. Ultrasonic elliptical vibration cutting of hard materials: simulation and experimental study. Int J Adv Manuf Technol. 2017;91:363–374.10.1007/s00170-016-9716-8 ↗
24. Du P, Chen W, Deng J, Zhang S, Zhang J, Liu Y. A critical review of piezoelectric ultrasonic transducers for ultrasonic-assisted precision machining. Ultrasonics. 2023;135:107145.10.1016/j.ultras.2023.107145 ↗
25. Li X, Zhang D. Ultrasonic elliptical vibration transducer driven by single actuator and its application in precision cutting. J Mater Process Technol. 2006;180(1–3):91–95.10.1016/j.jmatprotec.2006.05.007 ↗
26. Tan R, Zhao X, Zou X, Li Z, Hu Z, Zhang W, et al. Design and implementation of a novel single-driven ultrasonic elliptical vibration assisted cutting device. Micromachines. 2018;9(10):535.10.3390/mi9100535 ↗
27. Yin S, Dong Z, Bao Y, Kang R, Du W, Pan Y, et al. Development and optimization of ultrasonic elliptical vibration cutting device based on single excitation. J Manuf Sci Eng. 2021;143(8):081005.10.1115/1.4049965 ↗
28. Yin Z, Fu Y, Xu J, Li H, Cao Z, Chen Y. A novel single driven ultrasonic elliptical vibration cutting device. Int J Adv Manuf Technol. 2017;90:3289–3300.10.1007/s00170-016-9641-x ↗
29. Su Q, Su G, Shen X, Wang B, Du J, Zhang P. Design of an ultrasonic elliptical vibration cutting tool based on an eccentric cone. Int J Adv Manuf Technol. 2023;124(3–4):1003–1016.10.1007/s00170-022-10542-3 ↗
30. Tong J, Zhao J, Chen P, Zhao B. Effect of ultrasonic elliptical vibration turning on the microscopic morphology of aluminum alloy surface. Int J Adv Manuf Technol. 2020;106:1397–1407.10.1007/s00170-019-04463-x ↗
31. He X, Liu Q. Design and optimization of a single excitation elliptical vibration system. Int J Adv Manuf Technol. 2023;127(11–12):5745–5753.10.1007/s00170-023-11990-1 ↗
32. Wei S, Zou P, Zhang J, Duan J, Fang R. Theoretical and experimental research on 3D ultrasonic vibration-assisted turning driven by a single actuator. Int J Adv Manuf Technol. 2022;121(1–2):1173–1190.10.1007/s00170-022-09270-5 ↗
33. Kim GD, Loh BG. An ultrasonic elliptical vibration cutting device for micro v-groove machining: kinematical analysis and micro V-groove machining characteristics. J Mater Process Technol. 2007;190(1–3):181–188.
34. Kurniawan R, Ko TJ, Ping LC, Kumaran ST, Kiswanto G, Guo P, et al. Development of a two-frequency, elliptical-vibration texturing device for surface texturing. J Mech Sci Technol. 2017;31:3465–3473.10.1007/s12206-017-0635-x ↗
35. Guo P, Ehmann KF. Development of a tertiary motion generator for elliptical vibration texturing. Precis Eng. 2013;37(2):364–371.10.1016/j.precisioneng.2012.10.005 ↗
36. Zhang H, Feng P, Feng F, Zhang J, Wang C, Wang J. Structural coloration with two-dimensional nanostructures fabricated by elliptical vibration nanoindentation. Precis Eng. 2023;82:219–232.10.1016/j.precisioneng.2023.03.018 ↗
37. Yuan Y, Zhang D, Jing X, Ehmann KF. Freeform surface fabrication on hardened steel by double frequency vibration cutting. J Mater Process Technol. 2020;275: 116369.10.1016/j.jmatprotec.2019.116369 ↗
38. Yu F, Zhang C, Gan X, Hu X. Investigation on self-sensing monitoring and resonant control of ultrasonic vibration–assisted cutting. Int J Adv Manuf Technol. 2023;125(5–6):2435–2453.10.1007/s00170-023-10873-9 ↗
39. Yang J, Feng P, Zhang J, Wang J. Design optimization of ultrasonic vibration cutting tool to generate well-decoupled elliptical trajectory. Int J Adv Manuf Technol. 2022;119(11–12):7199–7214.10.1007/s00170-022-08745-9 ↗
40. Kim GD, Loh BG. Characteristics of elliptical vibration cutting in micro-v grooving with variations in the elliptical cutting locus and excitation frequency. J Micromech Microeng. 2007;18(2): 025002.10.1088/0960-1317/18/2/025002 ↗
41. Wang J, Liao WH, Guo P. Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations. Int J Mech Sci. 2020;170:105347.10.1016/j.ijmecsci.2019.105347 ↗
42. Bai W, Zhai Y, Zhao J, Han G, Ye L, Zhu X, et al. Experimental investigation of material removal in elliptical vibration cutting of cortical bone. Chin J Mech Eng. 2023;36(1):52.10.1186/s10033-023-00879-5 ↗
43. Jiang T, Yang J, Pi J, Luo W, Zhang J. Experimental and analytical study of ultrasonic elliptical vibration cutting of micro-pyramid reflective mold based on guided wave transmission. Int J Adv Manuf Technol. 2022;118:237–253.10.1007/s00170-021-07872-z ↗
44. Wang F, Zhao X, Guo H, Tian Y, Zhang D. Design, modeling and experiment of a novel ultrasonic elliptical vibration generator. Sens Actuators A. 2023;363: 114707.10.1016/j.sna.2023.114707 ↗
45. Suzuki N, Haritani M, Yang JB, Hino R, Shamoto E. Elliptical vibration cutting of tungsten alloy molds for optical glass parts. CIRP Ann. 2007;56(1):127–130.10.1016/j.cirp.2007.05.032 ↗
46. Zhang J, Suzuki N, Wang Y, Shamoto E. Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting. Precis Eng. 2015;39:86–99.10.1016/j.precisioneng.2014.07.009 ↗
47. Zhou M, Hu L. Development of an innovative device for ultrasonic elliptical vibration cutting. Ultrasonics. 2015;60:76–81.10.1016/j.ultras.2015.02.015 ↗
48. Tan R, Zhao X, Zou X, Sun T. A novel ultrasonic elliptical vibration cutting device based on a sandwiched and symmetrical structure. Int J Adv Manuf Technol. 2018;97:1397–1406.10.1007/s00170-018-2015-9 ↗
49. Bai W, Wang K, Du D, Zhang J, Huang W, Xu J. Design of an ultrasonic elliptical vibration device with two stationary points for ultra-precision cutting. Ultrasonics. 2022;120:106662.10.1016/j.ultras.2021.106662 ↗
50. Yao G, Wu F, Lucas M, Zheng L, Wang C, Gu H. Effect of longitudinal-bending elliptical ultrasonic vibration assistance on electrosurgical cutting and hemostasis. Ultrasonics. 2023;135:107113.10.1016/j.ultras.2023.107113 ↗
51. Du P, Han L, Qiu X, Chen W, Deng J, Liu Y, et al. Development of a high-precision piezoelectric ultrasonic milling tool using longitudinal-bending hybrid transducer. Int J Mech Sci. 2022;222: 107239.10.1016/j.ijmecsci.2022.107239 ↗
52. Yang Y, Gao S, Chen K, Pan Y, Guo P. Vibration analysis and development of an ultrasonic elliptical vibration tool based on a portal frame structure. Precis Eng. 2017;50:421–432.10.1016/j.precisioneng.2017.06.016 ↗
53. Huang W, Yu D, Zhang M, Ye F, Yao J. Analytical design method of a device for ultrasonic elliptical vibration cutting. J Acoust Soc Am. 2017;141(2):1238–1245.10.1121/1.4976340 ↗
54. Yin S, Bao Y, Pan Y, Dong Z, Jin Z, Kang R. Design of ultrasonic elliptical vibration cutting system for tungsten heavy alloy. Front Mech Eng. 2022;17(4):59.10.1007/s11465-022-0715-1 ↗
55. Zhang S, Guo Y, Chen Z, Li G, Guo Q, Wu Y, et al. Proposal for a novel elliptical ultrasonic aspirator and its fundamental performance in cartilage removal. Ultrasonics. 2021;109:106259.10.1016/j.ultras.2020.106259 ↗
56. Suzuki N, Hino R, Shamoto E. Development of 3 DOF ultrasonic elliptical vibration system for elliptical vibration cutting. In: Proceedings of ASPE spring topical meeting on vibration assisted machining technology. ASPE; 2007, p. 15–20.
57. Ali S, Kurniawan R, Ko TJ. Development of 3D resonant elliptical vibration transducer for dual-frequency micro-dimple surface texturing. Int J Precis Eng Manuf. 2021;22(8):1365–1379.10.1007/s12541-021-00551-9 ↗
58. Lotfi M, Amini S, Aghayar Z, Sajjady SA, Farid AA. Effect of 3D elliptical ultrasonic assisted boring on surface integrity. Measurement. 2020;163:108008.10.1016/j.measurement.2020.108008 ↗
59. Duan J, Zou P, Wang A, Wei S, Fang R. Research on three-dimensional ultrasonic vibration-assisted turning cutting force. J Manuf Process. 2023;91:167–187.10.1016/j.jmapro.2023.02.025 ↗
60. Zhang C, Song Y. Design and kinematic analysis of a novel decoupled 3D ultrasonic elliptical vibration assisted cutting mechanism. Ultrasonics. 2019;95:79–94.10.1016/j.ultras.2019.03.012 ↗
61. Kurniawan R, Ko TJ, Kumaran ST, Ahmed F. 3-DOF ultrasonic elliptical vibration tool holder based on coupled resonance modes for manufacturing micro-groove. Precis Eng. 2021;67:212–231.10.1016/j.precisioneng.2020.10.002 ↗
62. Lin J, Lu M, Zhou X. Development of a non-resonant 3D elliptical vibration cutting apparatus for diamond turning. Exp Tech. 2016;40:173–183.10.1007/s40799-016-0021-0 ↗
63. Wei S, Zou P, Fang L, Duan J. Theoretical and experimental study of 3D ultrasonic vibration-assisted turning driven by two actuators. Measurement. 2023;215: 112865.10.1016/j.measurement.2023.112865 ↗
64. Huang W, Zhang X, Wu C, Cao S, Zhou Q. Tool wear prediction in ultrasonic vibration-assisted drilling of CFRP: a hybrid data-driven physics model-based framework. Tribol Int. 2022;174:107755.10.1016/j.triboint.2022.107755 ↗
65. Lin Z, Song K, Yu X. A review on wire and arc additive manufacturing of titanium alloy. J Manuf Process. 2021;70:24–45.10.1016/j.jmapro.2021.08.018 ↗
66. Talignani A, Seede R, Whitt A, Zheng S, Ye J, Karaman I, et al. A review on additive manufacturing of refractory tungsten and tungsten alloys. Addit Manuf. 2022;58:103009.
67. Jiang G, Jianguo Z, Yanan P, Renke K, Yoshiharu N, Paul S, et al. A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals. Int J Extreme Manuf. 2020;2(1):012001.10.1088/2631-7990/ab5d8f ↗
68. Omole S, Lunt A, Kirk S, Shokrani A. Advanced processing and machining of tungsten and its alloys. J Manuf Mater Process. 2022;6(1):15.
69. Pan Y, Kang R, Bao Y, Yin S, Dong Z. Study on tool wear mechanism of single-crystal diamond in ultrasonic vibration elliptical cutting of tungsten heavy alloy. Wear. 2023;516:204616.10.1016/j.wear.2022.204616 ↗
70. Bai J, Xu Z, Qian L. Precision-improving manufacturing produces ordered ultra-fine grained surface layer of tungsten heavy alloy through ultrasonic elliptical vibration cutting. Mater Des. 2022;220:110859.10.1016/j.matdes.2022.110859 ↗
71. Li B, Xiang D, Peng P, Li Y, Liu G, Gao G, et al. Experimental and fem study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning. Ceram Int. 2023;49(9):13510–13519.10.1016/j.ceramint.2022.12.226 ↗
72. Pan Y, Bai J, Xu Z. Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys. Int J Adv Manuf Technol. 2022;123(11–12):3943–3953.10.1007/s00170-022-10293-1 ↗
73. Wang H, Kang R, Bao Y, Wang K, Guo X, Dong Z. Microstructure evolution mechanism of tungsten induced by ultrasonic elliptical vibration cutting at atomic/nano scale. Int J Mech Sci. 2023;253:108397.10.1016/j.ijmecsci.2023.108397 ↗
74. Zhao Q, Guo X, Wang H, Yin S, Kang R, Dong Z, et al. Effects of ultrasonic vibration cutting trajectories on chip formation of tungsten alloys. J Manuf Process. 2023;92:147–156.10.1016/j.jmapro.2023.02.053 ↗
75. Pan Y, Kang R, Bao Y, Du W, Yin S, Dong Z. Surface formation mechanism in ultrasonic elliptical vibration cutting of tungsten alloy. In: International conference on nanomanufacturing. Springer; 2021;109–122.10.1007/978-981-19-1918-3_13 ↗
76. Pan Y, Kang R, Dong Z, Du W, Yin S, Bao Y. Online prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning. J Intell Manuf. 2022;33:675-685.10.1007/s10845-020-01669-9 ↗
77. Airao J, Nirala CK, Bertolini R, Krolczyk GM, Khanna N. Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti–6Al–4V. Tribol Int. 2022;169:107494.10.1016/j.triboint.2022.107494 ↗
78. Airao J, Nirala CK, Outeiro J, Khanna N. Surface integrity in ultrasonic-assisted turning of Ti6Al4V using sustainable cutting fluid. Procedia CIRP. 2022;108:55–60.10.1016/j.procir.2022.04.068 ↗
79. Hu W, Du P, Qiu X, Zhao X, Hu Z, Zhang J, et al. Enhanced dry machinability of TC4 titanium alloy by longitudinal-bending hybrid ultrasonic vibration-assisted milling. J Clean Prod. 2022;379:134866.10.1016/j.jclepro.2022.134866 ↗
80. Sui H, Zhang L, Wang S, Gu Z. Theoretical and experimental investigation into the machining performance in axial ultrasonic vibration-assisted cutting of Ti6Al4V. Int J Adv Manuf Technol. 2021;116(1–2):449–472.10.1007/s00170-021-07447-y ↗
81. Lu M, Wang H, Guan L, Lin J, Gu Y, Chen B, et al. Modeling and analysis of surface topography of Ti6Al4V alloy machining by elliptical vibration cutting. Int J Adv Manuf Technol. 2018;98:2759–2768.10.1007/s00170-018-2452-5 ↗
82. Li S, Han J, Yu H, Wang J, Lu M, Tian Y, et al. Finite element investigation on cutting force and residual stress in 3D elliptical vibration cutting Ti6Al4V. Micromachines. 2022;13(8):1278.10.3390/mi13081278 ↗
83. Lotfi M, Amini S, Akbari J. Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti–6Al–4V: FEM and experimental examination. Tribol Int. 2020;151: 106492.10.1016/j.triboint.2020.106492 ↗
84. Tan R, Zhao X, Lin F, Jin S, Guo X, Chen X, et al. Analytical modelling and experimental study of surface roughness in ultrasonic elliptical vibration assisted ultra-precision cutting of Ti–6Al–4V alloy. Int J Adv Manuf Technol. 2023;126(5–6):1863–75.10.1007/s00170-023-11261-z ↗
85. Kurniawan R, Xu M, Li CP, Park GC, Kwak YI, Chen J, et al. Numerical analysis in ultrasonic elliptical vibration cutting (UEVC) combined with electrical discharge assistance (EDA) for Ti6Al4V. Int J Adv Manuf Technol. 2022;120(1–2):471–498.10.1007/s00170-022-08724-0 ↗
86. Zhang M, Zhang D, Geng D, Liu J, Shao Z, Jiang X. Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti–6Al–4V. Mater Des. 2020;191: 108658.10.1016/j.matdes.2020.108658 ↗
87. Liu J, Jiang X, Han X, Gao Z, Zhang D. Effects of rotary ultrasonic elliptical machining for side milling on the surface integrity of Ti–6Al–4V. Int J Adv Manuf Technol. 2019;101:1451–1465.10.1007/s00170-018-2847-3 ↗
88. Zhang M, Zhang D, Geng D, Shao Z, Liu Y, Jiang X. Effects of tool vibration on surface integrity in rotary ultrasonic elliptical end milling of Ti–6Al–4V. J Alloy Compd. 2020;821: 153266.10.1016/j.jallcom.2019.153266 ↗
89. Zhang Y, Wang X, Wu X, Zhao B. Stability analysis and chatter suppression of ultrasonic elliptical vibration milling of Ti–6Al–4V alloy. Int J Adv Manuf Technol. 2023;129:1301–1314.10.1007/s00170-023-12341-w ↗
90. Han X, Zhang D. Effects of separating characteristics in ultrasonic elliptical vibration-assisted milling on cutting force, chip, and surface morphologies. Int J Adv Manuf Technol. 2020;108:3075–3084.10.1007/s00170-020-05463-y ↗
91. Ming W, Cai C, Ma Z, Nie P, Li C, An Q. Milling mechanism and surface roughness prediction model in ultrasonic vibration-assisted side milling of Ti–6Al–4V. Int J Adv Manuf Technol. 2023;131:2279–2293.10.1007/s00170-023-11109-6 ↗
92. Gao J, Altintas Y. Chatter stability of synchronized elliptical vibration assisted milling. CIRP J Manuf Sci Technol. 2020;28:76–86.10.1016/j.cirpj.2019.11.006 ↗
93. Li Z, Yang S, Liu Q, et al. Chatter stability analysis and prediction for elliptical ultrasonic vibration-assisted milling process. Int J Adv Manuf Technol. 2024;133:2937–2950.10.1007/s00170-024-13889-x ↗
94. Bahl S, Suwas S, Chatterjee K. Comprehensive review on alloy design, processing, and performance of β titanium alloys as biomedical materials. Int Mater Rev. 2021;66(2):114–139.10.1080/09506608.2020.1735829 ↗
95. Wang Z, Pan Y, Zhang Y, Men X, Fu X, Ren S. Study on the material removal mechanism of ultrasonic elliptical vibration cutting of medical β titanium alloy. Micromachines. 2022;13(6):819.10.3390/mi13060819 ↗
96. Huang C, Zhou M, Zhang H. Investigations on the micro-interactions of grit-workpiece and forces prediction in ultrasonic vibration side grinding of optical glass. J Mater Process Technol. 2022;300: 117415.10.1016/j.jmatprotec.2021.117415 ↗
97. Li Y, Zhang D, Wang H, Ye G, He R, Cong W. Theoretical and experimental investigations on rotary ultrasonic surface micro-machining of brittle materials. Ultrason Sonochem. 2022;89: 106162.10.1016/j.ultsonch.2022.106162 ↗
98. Huang H, Li X, Mu D, Lawn BR. Science and art of ductile grinding of brittle solids. Int J Mach Tools Manuf. 2021;161: 103675.10.1016/j.ijmachtools.2020.103675 ↗
99. Zhao L, Zhang J, Zhang J, Hartmaier A. Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration assisted diamond cutting. Ceram Int. 2021;47(2):2358–2366.10.1016/j.ceramint.2020.09.078 ↗
100. Huang W, Yu D, Zhang X, Zhang M, Chen D. Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials. J Manuf Process. 2018;36:68–76.10.1016/j.jmapro.2018.09.029 ↗