Mechanical fracture of lattice structures fabricated by selective laser sintering
Source abstract
Abstract
Abstract The current study is focused on the static and dynamic behavior of different 3D-printed lattice structures fabricated by selective laser sintering (SLS) technique. To this end, body-centered cubic and face-centered cubic lattice structures were designed and printed using polyamide 12 (PA 12) material. A series of compression tests were performed on the lattice specimens under static loading conditions. We used the conventional split Hopkinson pressure bar (SHPB) at the impact speed of 12 m/s to determine the dynamic behavior of 3D-printed structures under high strain rate. In experimental practices, a high-speed camera was utilized as non-contact optical technique to document the process from initial impact till the specimen failure. In addition, finite element models were developed to determine the dynamic mechanical response of the lattice models. The experimental results indicated that the compressive strength increased with the loading rate. It confirmed the strain rare sensitivity of the studied PA 12. The results of this study can be employed to enhance the design of 3D-printed lattice structures for their further engineering applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Zhang J, Jung YG. Additive Manufacturing: Materials. Quantifications and Applications, Elsevier: Processes; 2018.
2. Khosravani MR, Ayatollahi MR, Reinicke T. Effects of post-processing techniques on the mechanical characterization of additively manufactured parts. J Manuf Processes. 2023;107:98–114.10.1016/j.jmapro.2023.10.018 ↗
3. Madhavadas V, Srivastava D, Chadha U, Raj S, Sultan M, Shahar F, Shah A. A review on metal additive manufacturing for intricately shaped aerospace components. CIRP J Manuf Sci Technol. 2022;50:185–97.
4. Mohammed AA, Algahtani MS, Ahmad MZ, Kotta S. 3D printing in medicine: technology overview and drug delivery applications. Ann 3D Print Med. 2021;4: 100037.10.1016/j.stlm.2021.100037 ↗
5. Davoudinejad A, Khosravani MR, Pedersen D, Tosello G. Influence of thermal ageing on the fracture and lifetime of additively manufactured mold inserts. Eng Fail Anal. 2020;115: 104694.10.1016/j.engfailanal.2020.104694 ↗
6. Wang J, Xiao X, Huang Z, Melzer A. 3D-printing based transducer holder for robotic assisted ultrasound guided HIFU. Procedia Manuf. 2019;30:3–10.10.1016/j.promfg.2019.02.002 ↗
7. El-Sayegh S, Romdhane L, Manjikian S. A critical review of 3D printing in construction: benefits, challenges, and risks. Arch Civ Mech Eng. 2020;34:1–25.
8. Wang P, Li J, Yang J, Wang G, He L, Zhang H. Enabling 3D multilayer electronics through the hybrid of vat photopolymerization and laser-activated selective metallization. Addit Manuf. 2023;74: 103717.
9. ISO/ASTM 52900: Additive manufacturing - General principles - Terminologys, Standard, ISO/ASTM (2015).
10. Khosravani MR, Soltani P, Reinicke T. Effects of steps on the load bearing capacity of 3D-printed single lap joints. J Mater Res Technol. 2023;23:1834–47.10.1016/j.jmrt.2023.01.032 ↗
11. Nikiema D, Balland P, Sergent A. Experimental and numerical investigations of 3D-printed Onyx parts reinforced with continuous glass fibers. Arch Civ Mech Eng. 2024;50:1–15.
12. Lin S, Peng C, Deng F, Yin D, Ye B. Influence of structural geometry on tensile properties and fracture toughness in 3D printed novel structures. Eng Fail Anal. 2024;161: 108277.10.1016/j.engfailanal.2024.108277 ↗
13. Nikiema D, Balland P, Sergent A. Influence of anisotropy and walls thickness on the mechanical behavior of 3D printed onyx parts. CIRP J Manuf Sci Technol. 2024;50:185–97.10.1016/j.cirpj.2024.03.002 ↗
14. Liu JL, Lim EWL, Sun ZP, Wang J, Tay TE, Tan VBC. Improving strength and impact resistance of 3D printed components with helicoidal printing direction. Int J Impact Eng. 2022;169: 104320.10.1016/j.ijimpeng.2022.104320 ↗
15. Mohotti D, Weerasinghe D, Bogahawaththa M, Wang H, Wijesooriya K, Hazell PJ. Quasi-static and dynamic compressive behaviour of additively manufactured menger fractal cube structures. Def Technol. 2024;35:39–49.10.1016/j.dt.2023.12.010 ↗
16. Bogahawaththa M, Mohotti D, Hazell PJ, Wang H, Wijesooriya K, Lee CK. Energy absorption and mechanical performance of 3D printed menger fractal structures. Eng Struct. 2024;305: 117774.10.1016/j.engstruct.2024.117774 ↗
17. Zerbst U, Klinger C, Clegg R. Fracture mechanics as a tool in failure analysis - Prospects and limitations. Eng Fail Anal. 2015;55:376–410.10.1016/j.engfailanal.2015.07.001 ↗
18. Weinberg K, Khosravani MR. On the tensile resistance of UHPC at impact. Eur Phys J Spec Top. 2018;227:167–77.10.1140/epjst/e2018-00057-1 ↗
19. Feng W, Chen B, Tang Y, Wei W, He W, Yang Y. Structural effects and real strain-rate effects on compressive strength of sustainable concrete with crumb rubber in split Hopkinson pressure bar tests. Arch Civ Mech Eng. 2022;136:1–24.
20. Deng Z, Zhou L, Zhu Z, Ma L, Chen J, Dai F, Peng T. Study of the fracture properties of twin tunnel surrounds subjected to the coupling of dynamic and static loads. Theor Appl Fract Mech. 2024;130: 104308.10.1016/j.tafmec.2024.104308 ↗
21. Qiang W, Durandet Y, Zhang X, Lu G. Experimental and numerical study on energy absorption performance of truncated origami materials. Thin-Walled Struct. 2024;200: 111911.10.1016/j.tws.2024.111911 ↗
22. Peng T, He F, Ren D, Zhou C, Xu R, Wang C. Study on dynamic failure behavior of cracks in elliptical tunnel surrounding rock under dynamic load. Theor Appl Fract Mech. 2024;133: 104541.10.1016/j.tafmec.2024.104541 ↗
23. Wang H, Hazell PJ. The state of the art in dynamic mechanical testing of yarns and fabrics: A mini review. Mater Lett. 2024;354: 135376.10.1016/j.matlet.2023.135376 ↗
24. Cavenagh R, Hazell PJ, Weerasinghe D, Wang H, Wang J, Mohotti D, Fraser D, Escobedo JP. Influence of the cover plate thickness on the ballistic penetration of re-entrant auxetic structures. Int J Impact Eng. 2024;186: 104890.10.1016/j.ijimpeng.2024.104890 ↗
25. He W, Luo W, Zhang J, Wang Z. Investigation on the fracture behavior of octet-truss lattice based on the experiments and numerical simulations. Theor Appl Fract Mech. 2023;125: 103918.10.1016/j.tafmec.2023.103918 ↗
26. Li L, Yang F, Jin Y, Li P, Zhang S, Xue K, Lu G, Fan H. Multifunctional hybrid plate lattice structure with high energy absorption and excellent sound absorption. Mater Des. 2024;241: 112946.10.1016/j.matdes.2024.112946 ↗
27. Alkhatib SE, Xu S, Lu G, Karrech A, Sercombe TB. Rate-dependent behaviour of additively manufactured topology optimised lattice structures. Thin-Walled Struct. 2024;198: 111710.10.1016/j.tws.2024.111710 ↗
28. Kappe K, Hoschke K, Riedel W, Hiermaier S. Multi-objective optimization of additive manufactured functionally graded lattice structures under impact. Int J Impact Eng. 2024;183: 104789.10.1016/j.ijimpeng.2023.104789 ↗
29. ASTM-D638, Standard test method for tensile properties of plastics, ASTM International (2014).
30. Sintratec S3, https://sintratec.com/sls-3d-printer/amp/sintratec-s3/, accessed: 15.04.2024.
31. Sintratec AG n.d., https://sintratec.com/product/sintratec-pa12-powder/, accessed: 11.04.2024.
32. ASTM-D695, Standard test method for compressive properties of rigid plastics, ASTM International (2023).
33. Fras T, Roth C, Mohr D. Fracture of high-strength armor steel under impact loading. Int J Impact Eng. 2018;111:147–64.10.1016/j.ijimpeng.2017.09.009 ↗
34. Ai D, Zhao Y, Wang Q, Li C. Crack propagation and dynamic properties of coal under SHPB impact loading: experimental investigation and numerical simulation. Theor Appl Fract Mech. 2020;105: 102393.10.1016/j.tafmec.2019.102393 ↗
35. Deshpande VM, Chakraborty P, Chakraborty T, Tiwari V. Application of copper as a pulse shaper in SHPB tests on brittle materials - experimental study, constitutive parameters identification, and numerical simulations. Mech Mater. 2022;171: 104336.10.1016/j.mechmat.2022.104336 ↗
36. Zaho Y, Wu Q, Zhou H, Zhao C, Wu L. Investigation on mechanical properties of Ti-6Al-4V multilayer micro-lattice biomaterials under dynamic compression loading. J Alloys Compd. 2024;977: 173419.10.1016/j.jallcom.2024.173419 ↗
37. Chen WW, Song B, Split H. Bar: design, testing and applications. Cham: Springer; 2010.
38. Gomez-del Rio T, Grespo M, Lopez R, Rodriguez J. Effect of strain rate on tensile fracture behavior of notched polyamide 12 processed by selective laser sintering. Theor Appl Fract Mech. 2022;121: 103434.10.1016/j.tafmec.2022.103434 ↗
39. Xu Y, Quino G, Ramakrishnan KR, Pellegrino A. Effects of build orientation and strain rate on the tensile-shear behaviour of polyamide-12 manufactured via laser powder bed fusion. Mater Des. 2023;232: 112162.10.1016/j.matdes.2023.112162 ↗
40. Ravichandran G, Subhash G. Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar. J Am Ceram Sco. 1994;77:263–7.10.1111/j.1151-2916.1994.tb06987.x ↗
41. Brugo T, Palazzetti R, Ciric-Kostic S, Yan XT, Minak G, Zucchelli A. Fracture mechanics of laser sintered cracked polyamide for a new method to induce cracks by additive manufacturing. Polym Test. 2016;50:301–8.10.1016/j.polymertesting.2016.01.024 ↗
42. Cobian L, Rueda-Ruiz M, Fernandez-Blazquez JP, Martinez V, Galvez F, Karayagiz F, Luck T, Segurado J, Monclus M. Micromechanical characterization of the material response in a PA12-SLS fabricated lattice structure and its correlation with bulk behavior. Polym Test. 2022;110: 107556.10.1016/j.polymertesting.2022.107556 ↗