journal article·2025-08-05Open access

Fabrication of mechanical metamaterials by 3D printing: recent advancements and current challenges

Mohammad Reza Khosravani, Denis Anders, Majid R. Ayatollahi, Tamara Reinicke

Abstract

Abstract Mechanical metamaterials as a class of architected materials have been attracting increasing attention during the last years. This is directly related to the advances in additive manufacturing (AM). Using AM for fabrication of mechanical metamaterials provides environmental adaptation, improved mechanical behavior, and additional functionality. The current paper presents a review on applications of AM in fabrication of mechanical metamaterials made by metals, polymers, and ceramics. Herein, the classification of metamaterials is presented and explained. Then, recent advancements in fabrications of mechanical metamaterials considering single, multi, and composite material are reviewed systematically. Moreover, other types of mechanical metamaterials such as negative thermal expansion and lightweight micro-lattices metamaterials fabricated by AM techniques are explained. In addition, current challenges in this field and future research prospects are outlined. The summarized data can be considered as insight for the researchers to consider the current technological challenges and develop applications of AM in manufacturing geometrically complex mechanical metamaterials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A. Alvarez-Trejo, E. Cuan-Urquizo, D. Bhate, A. Roman-Flores, Programmable multi-physical mechanics of mechanical metamaterials, Mater. Sci. Eng., R 155 (2023) 100745.
2. Smith DR, Pendry JB, Wiltshire M. Metamaterials and negative refractive index. Science. 2004;305:788–92.10.1126/science.1096796 ↗
3. A. Alu, N. Engheta, A. Massa, G. Oliveri, Metamaterials-by-Design, Elsevier, 2023.
4. Ashby MF, Jones D. Engineering Materials 1: Antroduction to Properties. Applications and Design: Elsevier; 2012.
5. Gulzari M, Ciochon A, Kennedy J. Easy to fabricate 3D metastructure for low-frequency vibration control. Arch Civ Mech Eng. 2024;24:1–10.10.1007/s43452-024-01032-2 ↗
6. Wu S, Luo Z, Li Z, Liu S, Zhang LC. Topological design of pentamode metamaterials with additive manufacturing. Comput Methods Appl Mech Eng. 2021;377: 113708.
7. Ma H, Wang K, Zhao H, Hong Y, Zhou Y, Xue J, Li Q, Wang G, Yan B. Energy dissipation in multistable auxetic mechanical metamaterials. Compos Struct. 2023;304:116410.
8. Khosravani MR, Ayatollahi MR, Reinicke T. Effects of post-processing techniques on the mechanical characterization of additively manufactured parts. J Manuf Processes 2023;107:98–11410.1016/j.jmapro.2023.10.018 ↗
9. Pastre MA, Tange SC, Anwer N. Test artefacts for additive manufacturing: A design methodology review. CIRP J Manuf Sci Technol. 2020;31:14–24.10.1016/j.cirpj.2020.09.008 ↗
10. Madhavadas V, Srivastava D, Chadha U, Raj SA, Sultan MT, Shahar F, Shah AU. A review on metal additive manufacturing for intricately shaped aerospace components. CIRP J Manuf Sci Technol. 2022;39:18–36.10.1016/j.cirpj.2022.07.005 ↗
11. A. A. Mohammed, M. S. Algahtani, M. Z. Ahmad, S. Kotta, 3D printing in medicine: Technology overview and drug delivery applications, Ann. 3D Print. Med. 4 (2021) 100037.10.1016/j.stlm.2021.100037 ↗
12. Khosravani MR, Nasiri S, Reinicke T. Intelligent knowledge-based system to improve injection molding process. J Ind Inf Integr. 2022;25: 100275.
13. Muhammad CW. Lim, Ultrawide bandgap by 3D monolithic mechanical metastructure for vibration and noise control. Arch Civ Mech Eng. 2021;21:1–11.10.1007/s43452-021-00201-x ↗
14. Romero PE, Barrios JA, Alabanda OR, Merino RG, Vaca GG. Manufacture of polyurethane foam parts for automotive industry using FDM 3D printed molds. CIRP J Manuf Sci Technol. 2021;32:396–404.10.1016/j.cirpj.2021.01.019 ↗
15. ISO/ASTM-52900, Additive manufacturing - general principles - fundamentals and vocabulary, ASTM International (2021).
16. M. Askari, D. A. Hutchins, P. J. Thomas, L. Astolfi, R. L. Watson, M. Absi, M. Ricci, S. Laureti, et al., Additive manufacturing of metamaterials. A review, Addit. Manuf. 36 (2020) 101562.10.1016/j.addma.2020.101562 ↗
17. Nazir A, Abate KM, Kumar A, Jeng JY. A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures. Int J Adv Manuf Technol. 2019;104:3489–510.10.1007/s00170-019-04085-3 ↗
18. Alvarez-Trejo A, Cuan-Urquizo E, Bhate D, Roman-Flores A. Mechanical metamaterials with topologies based on curved elemens: An overview of design, additive manufacturing and mechanical properties. Mater Des. 2023;233: 112190.10.1016/j.matdes.2023.112190 ↗
19. Zhou X, Ren L, Song Z, Li G, Zhang J, Li B, Wu Q, Li W, Ren L, Liu Q. Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications. Compos B. 2023;254: 110585.
20. Wu L, Wang Y, Zhai Z, Yang Y, Krishnaraju D, Lu J, Wu F, Wang Q, Jiang H. Mechanical metamaterials for full-band mechanical wave shielding. Appl Mater Today. 2020;20: 100671.
21. Zheng X, Uto K, Hu W, Chen T, Naito M, Wantanabe I. Reprogrammable flexible mechanical metamaterials. Appl Mater Today. 2022;29: 101662.
22. Lee G, Lee S, Rho J, Kim M. Acoustic and mechanical metamaterials for energy harvesting and self-powered sensing applications. Mater Today Energy. 2023;37: 101387.
23. Xiao X, Li H. Predicting mechanical responses of additively manufactured metamaterials with computational efficiency. CIRP J Manuf Sci Technol. 2024;52:149–58.10.1016/j.cirpj.2024.06.004 ↗
24. Xu Z, Razavi S, Ayatollahi MR. Functionally Graded Lattice Structures: Fabrication Methods. Failure Mechanisms and Applications, Elsevier, Oxford: Mechanical Properties; 2024.
25. Yu X, Zhou J, Liang H, Jiang Z, Wu L. Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review. Prog Mater Sci. 2018;94:114–73.10.1016/j.pmatsci.2017.12.003 ↗
26. Bose JC. On the rotation of plane of polarisation of electric waves by a twisted structure. P R Soc Lond. 1898;63:146–52.10.1098/rspl.1898.0019 ↗
27. Pendry JB. egative refraction makes a perfect lens. Phys Rev Lett. 2000;85:3966.10.1103/PhysRevLett.85.3966 ↗
28. R. Marques, F. Martin, M. Sorolla, Metamaterials with Negative Parameters: Theory, Design, and Microwave applications, John Wiley & Sons, 2011.
29. Kuzyk A, Schreiber R, Fan Z, Pardatscher G, Roller E, Hoegele A, Simmel F, Govorov A, Liedl T. DNA-based self-assembly of chiral plasmonic nanostructures with tailored optical response. Nature. 2012;483:311–4.10.1038/nature10889 ↗
30. Brule S, Javelaud EH, Enoch S, Guenneau S. Experiments on seismic metamaterials: Molding surface waves. Phys Rev Lett. 2014;112: 133901.10.1103/PhysRevLett.112.133901 ↗
31. Zhang Y, Matsumoto E, Peter A, Lin P, Kamien R, Yang S. One-step nanoscale assembly of complex structures via harnessing of an elastic instability. Nano Lett. 2008;8:1192–6.10.1021/nl0801531 ↗
32. Bertoldi K, Reis PM, Willshaw S, Mullin T. Negative poisson’s ratio behavior induced by an elastic instability. Adv Mater. 2010;22:361–6.10.1002/adma.200901956 ↗
33. Shim J, Shan S, Kosmrlj A, Kang SH, Chen E, Weaver J, Bertoldi K. Harnessing instabilities for design of soft reconfigurable auxetic/chiral materials. Soft Matter. 2013;9:8198–202.10.1039/c3sm51148k ↗
34. Ntayeesh TJ, Arefi M. Higher-order displacement, strain, and stress analyses of origami graphene auxetic metamaterial-reinforced cylindrical shell. Arch Civ Mech Eng. 2024;21:1–20.
35. Haghpanah B, Papadopoulos J, Mousanezhad D, Nayeb-Hashemi H, Vaziri A. Buckling of regular, chiral and hierarchical honeycombs under a general macroscopic stress state. Proc R Soc A. 2014;470:20130856.10.1098/rspa.2013.0856 ↗
36. Bueckmann T, Thiel M, Kadic M, Schittny R, Wegener M. An elasto-mechanical unfeelability cloak made of pentamode metamaterials. Nat Commun. 2014;5:4130.10.1038/ncomms5130 ↗
37. Cheng YC, Lu HC, Lee X, Zeng H, Priimagi A. Kirigami-based light-induced shape-morphing and locomotion. Adv Mater. 2020;32:1906233.10.1002/adma.201906233 ↗
38. Bao Y, Hong G, Chen Y, Chen J, Chen H, Song WL, Fang D. Customized kirigami electrodes for flexible and deformable lithium-ion batteries. ACS Appl Mater Interfaces. 2019;12:780–8.10.1021/acsami.9b18232 ↗
39. Wang XQ, Chan KH, Cheng Y, Ding T, Li T, Achavananthadith S, Ahmet S, Ho JS, Ho GW. Somatosensory, light-driven, thin-film robots capable of integrated perception and motility. Adv Mater. 2020;32:2000351.10.1002/adma.202000351 ↗
40. Li K, Cheng X, Zhu F, Li L, Xie Z, Luan H, Wang Z, Ji Z, Wang H, Liu F. A generic soft encapsulation strategy for stretchable electronics. Adv Funct Mater. 2019;29:1806630.10.1002/adfm.201806630 ↗
41. Zhang Q, Barri K, Jiao P, Lu W, Luo J, Meng W, Wang J, Hong L, Mueller J, LinWang Z, Alavi AH. Meta-mechanotronics for self-powered computation. Mater Today. 2023;65:78–89.10.1016/j.mattod.2023.03.026 ↗
42. Balan M, Mertens J, Bahubalendruni MR. Auxetic mechanical metamaterials and their futuristic developments: A state-of-art review. Mater Today Commun. 2022;34: 105285.
43. Jia H, Gu SY, Chang K. 3D printed self-expandable vascular stents from biodegradable shape memory polymer. Adv Polym Technol. 2018;37:3222–8.10.1002/adv.22091 ↗
44. Valathuru M, Pardhasaradhi P, Prasad N, Madhav B, Das S, Algarni A, Ghzaoui M. Design and analysis of metamaterial-based ultra-broadband micro-scaled absorber with vanadium dioxide (VO2) and silicon dioxide (SiO2) for multiple terahertz applications. Photonics Nanostruct Fundam Appl. 2025;64: 101381.10.1016/j.photonics.2025.101381 ↗
45. Lang JP, Jiang W, Teng XC, Zhang XG, Han D, Hao J, Xu HH, Ni XH, Xie YM, Qin QH. Assembled mechanical metamaterials with transformable shape and auxeticity. Constr Build Mater. 2023;378: 131181.
46. Lim D, Park J, Lee J, Noh D, Lee J, Choi J, Choi W. Broadband mechanical metamaterial absorber enabled by fused filament fabrication 3D printing. Addit Manuf. 2022;59: 102856.
47. Zhong H, Song T, Li C, Das R, Gu J, Qian M. The Gibson-Ashby model for additively manufactured metal lattice materials: Its theoretical basis, limitations and new insights from remedies. Curr Opin Solid State Mater Sci. 2023;27: 101081.10.1016/j.cossms.2023.101081 ↗
48. Isanaka B, Mukhopadhyay T, Varma R, Kushvaha V. On exploiting machine learning for failure pattern driven strength enhancement of honeycomb lattices. Acta Mater. 2022;239: 118226.10.1016/j.actamat.2022.118226 ↗
49. Grima JN, Gatt R, Farrugia PS. On the properties of auxetic meta-tetrachiral structures. Phys Status Solidi B. 2008;245:511–20.10.1002/pssb.200777704 ↗
50. Wojciechowski KW. Two-dimensional isotropic system with a negative poisson ratio. Phys Lett A. 1989;137:60–4.10.1016/0375-9601(89)90971-7 ↗
51. Prall D, Lakes RS. Properties of a chiral honeycomb with a poisson’s ratio of - 1. Int J Mech Sci. 1997;39:305–14.10.1016/S0020-7403(96)00025-2 ↗
52. Alderson A, Alderson KL, Attard D, Evans KE, Gatt R, Grima JN, Miller W, Ravirala N, Smith CW, Zeid K. Elastic constants of 3-, 4- and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading. Compos Sci Technol. 2010;70:1042–8.10.1016/j.compscitech.2009.07.009 ↗
53. Maconachie T, Leary M, Lozanovski B, Zhang X, Qian M, Faruque O, Brandt M. SLM lattice structures: Properties, performance, applications and challenges. Mater Des. 2019;183: 108137.10.1016/j.matdes.2019.108137 ↗
54. Reynolds BW, Fee CJ, Morison KR, Holland DJ. Characterisation of heat transfer within 3D printed TPMS heat exchangers. Int J Heat Mass Transfer. 2023;212: 124264.10.1016/j.ijheatmasstransfer.2023.124264 ↗
55. Mousanezhad D, Haghpanah B, Ghosh R, Hamouda AM, Nayeb-Hashemi H, Vaziri A. Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach. Theor Appl Mech Lett. 2016;6:81–96.10.1016/j.taml.2016.02.004 ↗
56. Kuzky A, Schreiber R, Fan Z, Pardatscher G, Roller E, Hoegele A, Simmel FS, Govorov A, Leidl T. DNA-based self-assembly of chiral plasmonic nanostructures with tailored optical responseg. Nature. 2012;483:311–4.10.1038/nature10889 ↗
57. Bacigalupo A, Gambarotta L. Simplified modelling of chiral lattice materials with local resonators. Int J Solids Struct. 2016;83:126–41.10.1016/j.ijsolstr.2016.01.005 ↗
58. N. A. fleck, V. S. Deshpande, M. F. Ashby, Micro-architectured materials: past, present and future, Proc. R. Soc. A 466 (2010) 2495–2516.10.1098/rspa.2010.0215 ↗
59. L. J. Gibson, M. F. Ashby, Cellular solids: structure and properties, Cambridge University Press, 1997.10.1017/CBO9781139878326 ↗
60. Torrents A, Schaedler TA, Jacobsen AJ, Carter WB, Valdevit L. Characterization of nickel-based microlattice materials with structural hierarchy from the nanometer to the millimeter scale. Acta Mater. 2012;60:3511–23.10.1016/j.actamat.2012.03.007 ↗
61. Evans AG, Hutchinson JW, Fleck NA, Ashby MF, Wadley HN. The topological design of multifunctional cellular metals. Prog Mater Sci. 2001;46:309–27.10.1016/S0079-6425(00)00016-5 ↗
62. M. F. Ashby, T. Evans, N. Fleck, J. W. Hutchenson, H. N. Wadley, L. J. Gibson, Metal foams: A design guide, Butterworth-Heinemann, 2000.
63. Lee JH, Singer JP, Thomas EL. Micro-/nanostructured mechanical metamaterials. Adv Mater. 2012;24:4782–810.10.1002/adma.201201644 ↗
64. Zheng X, Lee H, Weisgraber TH, Shusteff M, DeOtte J, Duoss EB, et al. Ultralight, ultrastiff mechanical metamaterials. Science. 2014;344:1373–7.10.1126/science.1252291 ↗
65. Bauer J, Schroer A, Schwaiger R, Kraft O. Approaching theoretical strength in glassy carbon nanolattices. Nat Mater. 2016;15:438–43.10.1038/nmat4561 ↗
66. Meza LR, Das S, Greer JR. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices. Science. 2014;345:1322–6.10.1126/science.1255908 ↗
67. Schaedler T, Jacobsen A, Torrents A, Sorensen A, Lian J, Greer J, et al. Ultralight metallic microlattices. Science. 2011;334:962–5.10.1126/science.1211649 ↗
68. Z. Cheng, T. han, B. Duoss, M. Golobic, D. Kuntz, M. Spadaccini, A. Worsley, Highly compressible 3D periodic graphene aerogel microlattices, Nat. Commun. 6 (2015) 6962.10.1038/ncomms7962 ↗
69. Lang RJ. The science of origami. Phys World. 2007;20:30–1.10.1088/2058-7058/20/2/31 ↗
70. Li S, Wang KW. Fluidic origami: a plant-inspired adaptive structure with shape morphing and stiffness tuning. Smart Mater Struct. 2015;24: 105031.
71. Schenk M, Guest SD. Geometry of miura-folded metamaterials. Proc Natl Acad Sci. 2013;110:3276–81.10.1073/pnas.1217998110 ↗
72. Liu Z, Fang H, Xu J, Wang K. Cellular automata inspired multistable origami metamaterials for mechanical learning. Adv Sci. 2023;10:2305146.10.1002/advs.202305146 ↗
73. Overvelde JT, Jong T, Shevchenko Y, Becerra S, Whitesides G, Weaver J, Hoberman C, Bertoldi K. A three-dimensional actuated origami-inspired transformable metamaterial with multiple degrees of freedom. Nat Commun. 2016;7:10929.10.1038/ncomms10929 ↗
74. Lechenault F, Thiria B, Adda-Bedia M. Mechanical response of a creased sheet. Phys Rev Lett. 2014;112: 244301.10.1103/PhysRevLett.112.244301 ↗
75. Bende NP, Evans AA, Innes-Gold S, Marin LA, Cohen I, Hayward R, et al. Geometrically controlled snapping transitions in shells with curved creases. Proc Natl Acad Sci. 2015;112:11175–80.10.1073/pnas.1509228112 ↗
76. Silverberg JL, Na J, Evans AA, Liu B, Hull TC, Santangelo CD, et al. Origami structures with a critical transition to bistability arising from hidden degrees of freedom. Nat Mater. 2015;14:389–93.10.1038/nmat4232 ↗
77. Waitukaitis S, Menaut R, Chen B, van Hecke M. Origami multistability: from single vertices to metasheets. Phys Rev Lett. 2015;114: 055503.10.1103/PhysRevLett.114.055503 ↗
78. Peraza-Hernandez EA, Hartl DJ, Malak JR, Lagoudas DC. Origami-inspired active structures: a synthesis and review. Smart Mater Struct. 2014;135: 111008.
79. Wei Z, Guo Z, Dudte L, Liang H, Mahadevan L. Geometric mechanics of periodic pleated origami. Phys Rev Lett. 2013;110: 215501.
80. Lv C, Krishnaraju D, Konjevod G, Yu H, Jiang H. Origami based mechanical metamaterials. Sci Rep. 2014;4:5979.10.1038/srep05979 ↗
81. Silverberg JL, Evans AA, McLeod L, Hayward RC, Hull T, Santangelo CD, et al. Using origami design principles to fold reprogrammable mechanical metamaterials. Science. 2014;345:647–50.10.1126/science.1252876 ↗
82. Yasuda H, Yang J. Reentrant origami-based metamaterials with negative poisson’s ratio and bistability. Phys Rev Lett. 2015;114: 185502.10.1103/PhysRevLett.114.185502 ↗
83. Wang H, Zhao D, Jin Y, Wang M, Mukhopadhyay T, You Z. Modulation of multi-directional auxeticity in hybrid origami metamaterials. Appl Mater Today. 2020;20: 100715.10.4028/b-S8Aj0Z ↗
84. R. D. Resch, Self-supporting structural unit having a series of repetitious geometrical modules (U.S patent no. 3407558, 1968).
85. Al-Mulla T, Buehler MJ. Folding creases through bending. Nat Mater. 2015;14:366–8.10.1038/nmat4258 ↗
86. Demaine ED, Demaine ML, Hart V, Price GN, Tachi T. (none) existence of pleated folds: how paper folds between creases. Graph Combinator. 2011;27:377–97.10.1007/s00373-011-1025-2 ↗
87. Wang Y, Lakes R. Composites with inclusions of negative bulk modulus: extreme damping and negative poisson’s ratio. J Compos Mater. 2005;39:1645–57.10.1177/0021998305051112 ↗
88. Overvelde JT, Shan JT, Bertoldi K. Compaction through buckling in 2D periodic, soft and porous structures: effect of pore shape. Adv Mater. 2012;24:2337–42.10.1002/adma.201104395 ↗
89. Kruijf N, Zhou S, Li Q, Mai Y. Topological design of structures and composite materials with multiobjectives. Int J Solids Struct. 2007;44:7092–109.10.1016/j.ijsolstr.2007.03.028 ↗
90. Overvelde JT, Bertoldi K. Relating pore shape to the non-linear response of periodic elastomeric structures. J Mech Phys Solids. 2014;64:351–66.10.1016/j.jmps.2013.11.014 ↗
91. Okumura D, Inagaki T, Ohno N. Effect of prestrains on swelling-induced buckling patterns in gel films with a square lattice of holes. Int J Solids Struct. 2009;858:288–300.
92. Jang JH, Koh CV, Bertoldi K, Boyce MC, Thomas EL. Combining pattern instability and shape-memory hysteresis for phononic switching. Nano Lett. 2009;9:2113–9.10.1021/nl9006112 ↗
93. Rossiter J, Takashima K, Scarpa F, Walters P, Mukai T. Shape memory polymer hexachiral auxetic structures with tunable stiffness. Smart Mater Struct. 2014;23: 045007.10.1088/0964-1726/23/4/045007 ↗
94. Karnessis N, Burriesci G. Uniaxial and buckling mechanical response of auxetic cellular tubes. Smart Mater Struct. 2013;22: 084008.10.1088/0964-1726/22/8/084008 ↗
95. Li J, Shim J, Deng J, Overvelde JT, Zhu X, Bertoldi K, et al. Switching periodic membranes via pattern transformation and shape memory effect. Soft Matter. 2012;8:10322–8.10.1039/c2sm25816a ↗
96. Grima JN, Mizzi L, Azzopardi KM, Gatt R. Auxetic perforated mechanical metamaterials with randomly oriented cuts. Adv Mater. 2016;28:385–9.10.1002/adma.201503653 ↗
97. Shan S, Kang SH, Zhao Z, Fang L, Bertoldi K. Design of planar isotropic negative poisson’s ratio structures. Extreme Mech Lett. 2015;4:96–102.10.1016/j.eml.2015.05.002 ↗
98. Carta G, Brun M, Baldi A. Design of a porous material with isotropic negative poisson’s ratio. Mech Mater. 2016;97:67–75.10.1016/j.mechmat.2016.02.012 ↗
99. Bauer J, Hengsbach S, Tesari I, Schwaiger R, Kraft O. High-strength cellular ceramic composites with 3D microarchitecture. Proc Natl Acad Sci. 2014;111:2453–8.10.1073/pnas.1315147111 ↗
100. Kumar R, Kumar M, Chohan JS. The role of additive manufacturing for biomedical applications: A critical review. J Manuf Processes. 2021;64:828–50.10.1016/j.jmapro.2021.02.022 ↗