journal article·2025-02-16

Pulsed GTAW joint of P92 steel and Inconel 625: microstructure and mechanical properties

Sachin Sirohi, Amit Kumar, Manohar Singh, Dariusz Fydrych, Chandan Pandey

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Ding K, Qiao S, Liu S, Zhao B, Huo X, Li X, Gao Y. Failure transition mechanism of stress rupture performance of the Inconel 625/9 Pct Cr steel dissimilar welded joint. Metall Mater Trans A Phys Metall Mater Sci. 2019;50:4652–64. https://doi.org/10.1007/s11661-019-05372-0.10.1007/s11661-019-05372-0 ↗
2. Lu F, Liu P, Ji H, Ding Y, Xu X, Gao Y. Dramatically enhanced impact toughness in welded 10%Cr rotor steel by high temperature post-weld heat treatment. Mater Charact. 2014;92:149–58. https://doi.org/10.1016/j.matchar.2014.03.014.10.1016/j.matchar.2014.03.014 ↗
3. Liu X, Cai Z, Deng X, Lu F. Investigation on the weakest zone in toughness of 9Cr/NiCrMoV dissimilar welded joint and its enhancement. J Mater Res. 2017;32:3117–27. https://doi.org/10.1557/jmr.2017.222.10.1557/jmr.2017.222 ↗
4. Akram J, Kalvala PR, Misra M, Charit I. Creep behavior of dissimilar metal weld joints between P91 and AISI 304. Mater Sci Eng A. 2017;688:396–406. https://doi.org/10.1016/j.msea.2017.02.026.10.1016/j.msea.2017.02.026 ↗
5. Bugge J, Kjær S, Blum R. High-efficiency coal-fired power plants development and perspectives. Energy. 2006;31:1437–45. https://doi.org/10.1016/j.energy.2005.05.025.10.1016/j.energy.2005.05.025 ↗
6. Brózda J. New generation creep-resistant steels, their weldability and properties of welded joints: T/P92 steel. Weld Int. 2005;19:5–13. https://doi.org/10.1533/wint.2005.3370.10.1533/wint.2005.3370 ↗
7. Maurya AK, Chhibber R, Pandey C. Studies on residual stresses and structural integrity of the dissimilar gas tungsten arc welded joint of sDSS 2507/Inconel 625 for marine application. J Mater Sci. 2023;58:8597–634. https://doi.org/10.1007/s10853-023-08562-9.10.1007/s10853-023-08562-9 ↗
8. Korrapati PK, Avasarala VK, Bhushan M, Devendranath Ramkumar K, Arivazhagan NN, Narayanan S. Assessment of mechanical properties of PCGTA weldments of inconel 625. Procedia Eng. 2014;75:9–13. https://doi.org/10.1016/j.proeng.2013.11.002.10.1016/j.proeng.2013.11.002 ↗
9. Shankar V, Bhanu Sankara Rao K, Mannan SL. Microstructure and mechanical properties of Inconel 625 superalloy. J Nucl Mater. 2001;288:222–32. https://doi.org/10.1016/S0022-3115(00)00723-6.10.1016/S0022-3115(00)00723-6 ↗
10. Prabaharan P, Ramkumar KD, Arivazhagan N. Characterization of microstructure and mechanical properties of Super Ni 718 alloy and AISI 316L dissimilar weldments. J Mater Res. 2014;29:3011–23. https://doi.org/10.1557/jmr.2014.329.10.1557/jmr.2014.329 ↗
11. Shah Hosseini H, Shamanian M, Kermanpur A. Microstructural and weldability analysis of Inconel617/AISI 310 stainless steel dissimilar welds. Int J Press Vessel Pip. 2016;144:18–24. https://doi.org/10.1016/j.ijpvp.2016.05.004.10.1016/j.ijpvp.2016.05.004 ↗
12. Kumar A, Pandey C. Development and evaluation of dissimilar gas tungsten arc-welded joint of P92 steel/inconel 617 alloy for advanced ultra-supercritical boiler applications. Metall Mater Trans A Phys Metall Mater Sci. 2022;53:3245–73. https://doi.org/10.1007/s11661-022-06723-0.10.1007/s11661-022-06723-0 ↗
13. Dak G, Singh V, Kumar A, Sirohi S, Bhattacharyya A, Pandey C, Pandey SM. Microstructure and mechanical behaviour study of the dissimilar weldment of ‘IN82 buttered’ P92 steel and AISI 304L steel for ultra super critical power plants. Mater Today Commun. 2023;37:107552. https://doi.org/10.1016/j.mtcomm.2023.107552.10.1016/j.mtcomm.2023.107552 ↗
14. Shah Hosseini H, Shamanian M, Kermanpur A. Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds. Mater Charact. 2011;62:425–31. https://doi.org/10.1016/j.matchar.2011.02.003.10.1016/j.matchar.2011.02.003 ↗
15. Zhang Y, Hu M, Cai Z, Han C, Li X, Huo X, Fan M, Rui S, Li K, Pan J. Effect of nickel-based filler metal types on creep properties of dissimilar metal welds between Inconel 617B and 10% Cr martensitic steel. J Mater Res Technol. 2021;14:2289–301. https://doi.org/10.1016/j.jmrt.2021.07.131.10.1016/j.jmrt.2021.07.131 ↗
16. Kumar A, Pandey C. Some studies on dissimilar welds joint P92 steel and Inconel 617 alloy for AUSC power plant application. Int J Press Vessel Pip. 2022;198:104678. https://doi.org/10.1016/j.ijpvp.2022.104678.10.1016/j.ijpvp.2022.104678 ↗
17. Naffakh H, Shamanian M, Ashrafizadeh F. Microstructural evolutions in dissimilar welds between AISI 310 austenitic stainless steel and Inconel 657. J Mater Sci. 2010;45:2564–73. https://doi.org/10.1007/s10853-010-4227-8.10.1007/s10853-010-4227-8 ↗
18. Kumar A, Pandey C. Structural integrity assessment of Inconel 617/P92 steel dissimilar welds for different groove geometry. Sci Rep. 2023;13:8061. https://doi.org/10.1038/s41598-023-35136-1.10.1038/s41598-023-35136-1 ↗
19. Abson DJ, Rothwell JS. Review of type IV cracking of weldments in 9–12 % Cr creep strength enhanced ferritic steels. Int Mater Rev. 2013;58:437–73. https://doi.org/10.1179/1743280412Y.0000000016.10.1179/1743280412Y.0000000016 ↗
20. Zareie Rajani HR, Akbari Mousavi SAA, Madani Sani F. Comparison of corrosion behavior between fusion cladded and explosive cladded Inconel 625/plain carbon steel bimetal plates. Mater Des. 2013;43:467–74. https://doi.org/10.1016/j.matdes.2012.06.053.10.1016/j.matdes.2012.06.053 ↗
21. Srikanth A, Manikandan M. Development of welding technique to avoid the sensitization in the alloy 600 by conventional gas tungsten arc welding method. J Manuf Process. 2017;30:452–66. https://doi.org/10.1016/j.jmapro.2017.10.014.10.1016/j.jmapro.2017.10.014 ↗
22. Ramkumar KD, Krishnan SR, Ramanand R, Logesh S, Satyandas T, Ameer A, Arivazhagan N. Structure-property relationships of PCGTA welds of Inconel X750 in as-welded and post-weld heat treated conditions—a comparative study. J Manuf Process. 2015;20:1–14. https://doi.org/10.1016/j.jmapro.2015.10.003.10.1016/j.jmapro.2015.10.003 ↗
23. Matsunaga T, Hongo H, Tabuchi M. Interfacial failure in dissimilar weld joint of high boron 9% chromium steel and nickel-based alloy under high-temperature creep condition. Mater Sci Eng A. 2017;695:302–8. https://doi.org/10.1016/j.msea.2017.04.012.10.1016/j.msea.2017.04.012 ↗
24. Kangazian J, Shamanian M, Ashrafi A. Dissimilar welding between SAF 2507 stainless steel and Incoloy 825 Ni-based alloy: the role of microstructure on corrosion behavior of the weld metals. J Manuf Process. 2017;29:376–88. https://doi.org/10.1016/j.jmapro.2017.08.012.10.1016/j.jmapro.2017.08.012 ↗
25. Manikandan M, Arivazhagan N, Rao MN, Reddy GM. Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques. J Manuf Process. 2014;16:563–72. https://doi.org/10.1016/j.jmapro.2014.08.002.10.1016/j.jmapro.2014.08.002 ↗
26. Jula M, Dehmolaei R, Alavi Zaree SR. The comparative evaluation of AISI 316/A387-Gr.91 steels dissimilar weld metal produced by CCGTAW and PCGTAW processes. J Manuf Process. 2018;36:272–80. https://doi.org/10.1016/j.jmapro.2018.10.032.10.1016/j.jmapro.2018.10.032 ↗
27. Ramkumar KD, Chandrasekhar A, Singh AK, Ahuja S, Arivazhagan N. Effect of filler metals on the structure-property relationships of continuous and pulsed current GTA welds of AISI 430 and AISI 904L. Metallogr Microstruct Anal. 2015;4:525–41. https://doi.org/10.1007/s13632-015-0236-y.10.1007/s13632-015-0236-y ↗
28. Devendranath Ramkumar K, Patel SD, Sri Praveen S, Choudhury DJ, Prabaharan P, Arivazhagan N, Xavior MA. Influence of filler metals and welding techniques on the structure-property relationships of Inconel 718 and AISI 316L dissimilar weldments. Mater Des. 2014;62:175–88. https://doi.org/10.1016/j.matdes.2014.05.019.10.1016/j.matdes.2014.05.019 ↗
29. Rajkumar V, Arivazhagan N. Role of pulsed current on metallurgical and mechanical properties of dissimilar metal gas tungsten arc welding of maraging steel to low alloy steel. Mater Des. 2014;63:69–82. https://doi.org/10.1016/j.matdes.2014.05.055.10.1016/j.matdes.2014.05.055 ↗
30. Jula M, Dehmolaei R, Reza S, Zaree A. Statistical approach to the corrosion behavior of dissimilar welds of A387-Gr91/AISI316 steels with PCGTAW process. J Adv Mater Process. 2017;5:3–12.
31. Kumar A, Pandey C. Development and evaluation of dissimilar gas tungsten arc-welded joint of P92 steel/Inconel 617 alloy for advanced ultra-supercritical boiler applications. Metall Mater Trans A. 2022;53:3245–73. https://doi.org/10.1007/s11661-022-06723-0.10.1007/s11661-022-06723-0 ↗
32. ASTM E8. ASTM E8/E8M standard test methods for tension testing of metallic materials 1. Annu B ASTM Stand. 2010;4:1–27. https://doi.org/10.1520/E0008.10.1520/E0008 ↗
33. ASTM E 23-12c. Standard test methods for notched bar impact testing of metallic materials. Standards. 2012;1–25. https://doi.org/10.1520/E0023-23A.10.1520/E0023-23A ↗
34. Saini N, Pandey C, Mahapatra MM. Characterization and evaluation of mechanical properties of CSEF P92 steel for varying normalizing temperature. Mater Sci Eng A. 2017;688:250–61. https://doi.org/10.1016/j.msea.2017.02.022.10.1016/j.msea.2017.02.022 ↗
35. Pandey C, Mohan Mahapatra M, Kumar P, Thakre JG, Saini N. Role of evolving microstructure on the mechanical behaviour of P92 steel welded joint in as-welded and post weld heat treated state. J Mater Process Technol. 2019;263:241–55. https://doi.org/10.1016/j.jmatprotec.2018.08.032.10.1016/j.jmatprotec.2018.08.032 ↗
36. Panait CG, Bendick W, Fuchsmann A, Gourgues-Lorenzon AF, Besson J. Study of the microstructure of the grade 91 steel after more than 100,000 h of creep exposure at 600 °C. Int J Press Vessel Pip. 2010;87:326–35. https://doi.org/10.1016/j.ijpvp.2010.03.017.10.1016/j.ijpvp.2010.03.017 ↗
37. Yang YK, Kou S. Weld-bottom macrosegregation caused by dissimilar filler metals. Weld J. 2007;86:379–87.
38. Kou S, Yang YK. Fusion-boundary macrosegregation in dissimilar-filler welds. Weld J (Miami, Fla). 2007;86:303–12.
39. Ravikiran K, Mehtani H, Sivaprasad K, Prasad MJNV, Kumar S, Singh PK, Ghosh M. Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel. Int J Press Vessel Pip. 2022;195:104576. https://doi.org/10.1016/j.ijpvp.2021.104576.10.1016/j.ijpvp.2021.104576 ↗
40. Soysal T, Kou S, Tat D, Pasang T. Macrosegregation in dissimilar-metal fusion welding. Acta Mater. 2016;110:149–60. https://doi.org/10.1016/j.actamat.2016.03.004.10.1016/j.actamat.2016.03.004 ↗
41. Yoo SC, Choi KJ, Bahn CB, Kim SH, Kim JY, Kim JH. Effects of thermal aging on the microstructure of type-II boundaries in dissimilar metal weld joints. J Nucl Mater. 2015;459:5–12. https://doi.org/10.1016/j.jnucmat.2015.01.009.10.1016/j.jnucmat.2015.01.009 ↗
42. Hou J, Peng Q, Takeda Y, Kuniya J, Shoji T. Microstructure and stress corrosion cracking of the fusion boundary region in an alloy 182-A533B low alloy steel dissimilar weld joint. Corros Sci. 2010;52:3949–54. https://doi.org/10.1016/j.corsci.2010.08.002.10.1016/j.corsci.2010.08.002 ↗
43. Kumar A, Sirohi S, Singh M, Fydrych D, Pandey C. Microstructure and mechanical properties of a dissimilar metal welded joint of Inconel 617 and P92 steel with Inconel 82 buttering layer for AUSC boiler application. Int J Press Vessel Pip. 2024;209:105196. https://doi.org/10.1016/j.ijpvp.2024.105196.10.1016/j.ijpvp.2024.105196 ↗
44. DuPont JN, Lippold JC, Kiser SD. Welding metallurgy and weldability of nickel-base alloys. Wiley. 2009. https://doi.org/10.1002/9780470500262.10.1002/9780470500262 ↗
45. Rathore S, Kumar A, Sirohi S, Singh V, Gupta A, Fydrych D, Pandey C. Role of buttering layer composition on microstructural heterogeneity and mechanical properties of Alloy 617 and P92 steel dissimilar welded joints for future Indian AUSC program. Int J Adv Manuf Technol. 2024;133:671–700. https://doi.org/10.1007/s00170-024-13747-w.10.1007/s00170-024-13747-w ↗
46. Kumar A, Pandey SM, Pandey C. Dissimilar weldments of ferritic/martensitic grade P92 steel and Inconel 617 alloy: role of groove geometry on mechanical properties and residual stresses. Springer London; 2023. https://doi.org/10.1007/s43452-022-00592-5.10.1007/s43452-022-00592-5 ↗
47. Ramkumar KD, Kumar PSG, Krishna VR, Chandrasekhar A, Dev S, Abraham WS, Prabhakaran S, Kalainathan S, Sridhar R. Influence of laser peening on the tensile strength and impact toughness of dissimilar welds of Inconel 625 and UNS S32205. Mater Sci Eng A. 2016;676:88–99. https://doi.org/10.1016/j.msea.2016.08.104.10.1016/j.msea.2016.08.104 ↗
48. Jamrozik W, Górka J, Kik T. Temperature-based prediction of joint hardness in TIG welding of Inconel 600, 625 and 718 nickel superalloys. Materials. 2021;14:442. https://doi.org/10.3390/ma14020442.10.3390/ma14020442 ↗
49. Sirohi S, Pandey C, Goyal A. Role of the Ni-based filler (IN625) and heat-treatment on the mechanical performance of the GTA welded dissimilar joint of P91 and SS304H steel. J Manuf Process. 2021;65:174–89. https://doi.org/10.1016/j.jmapro.2021.03.029.10.1016/j.jmapro.2021.03.029 ↗
50. Zhang Z, Holloway G, Marshall A. Properties of T/P92 weld metals for ultra super critical (USC) power plant. Int J Microstruct Mater Prop. 2011;6:20–39. https://doi.org/10.1504/IJMMP.2011.040435.10.1504/IJMMP.2011.040435 ↗
51. Pandey C, Mahapatra MM, Kumar P, Saini N. Some studies on P91 steel and their weldments. J Alloys Compd. 2018;743:332–64. https://doi.org/10.1016/j.jallcom.2018.01.120.10.1016/j.jallcom.2018.01.120 ↗
52. Saini N, Mulik RS, Mahapatra MM, Kannan R, Sharma NK, Li L. Dissolution of δ-ferrite and its effect on mechanical properties of P92 steel welds. Mater Sci Eng A. 2020;796:139370. https://doi.org/10.1016/j.msea.2020.139370.10.1016/j.msea.2020.139370 ↗
53. Hurtado-Noreña C, Danón CA, Luppo MI, Bruzzoni P. Evolution of minor phases in a P91 steel normalized and tempered at different temperatures. Procedia Mater Sci. 2015;8:1089–98. https://doi.org/10.1016/j.mspro.2015.04.172.10.1016/j.mspro.2015.04.172 ↗
54. Francis JA, Mazur W, Bhadeshia HKDH. Type IV cracking in ferritic power plant steels. Mater Sci Technol. 2006;22:1387–95. https://doi.org/10.1179/174328406X148778.10.1179/174328406X148778 ↗
55. Dak G, Guguloth K, Vidyarthy RS, Fydrych D, Pandey C. Creep rupture study of dissimilar welded joints of P92 and 304L steels. Weld World. 2024. https://doi.org/10.1007/s40194-024-01757-x.10.1007/s40194-024-01757-x ↗
56. Zhang Y, Li K, Cai Z, Pan J. Creep rupture properties of dissimilar metal weld between Inconel 617B and modified 9%Cr martensitic steel. Mater Sci Eng A. 2019;764:138185. https://doi.org/10.1016/j.msea.2019.138185.10.1016/j.msea.2019.138185 ↗
57. Dak G, Pandey C. Experimental investigation on microstructure, mechanical properties, and residual stresses of dissimilar welded joint of martensitic P92 and AISI 304L austenitic stainless steel. Int J Press Vessel Pip. 2021;194:104536. https://doi.org/10.1016/j.ijpvp.2021.104536.10.1016/j.ijpvp.2021.104536 ↗
58. Sauraw A, Sharma AK, Fydrych D, Sirohi S, Gupta A, Świerczyńska A, Pandey C, Rogalski G. Study on microstructural characterization, mechanical properties and residual stress of gtaw dissimilar joints of p91 and p22 steels. Materials. 2021;14:6591. https://doi.org/10.3390/ma14216591.10.3390/ma14216591 ↗
59. Sireesha M, Albert SK, Sundaresan S. Thermal cycling of transition joints between modified 9Cr-1Mo steel and alloy 800 for steam generator application. Int J Press Vessel Pip. 2002;79:819–27. https://doi.org/10.1016/S0308-0161(02)00104-7.10.1016/S0308-0161(02)00104-7 ↗
60. Kumar S, Yadav V, Sharma S, Pandey C, Goyal A, Kumar P. Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel welds joint. Int J Press Vessel Pip. 2021;193:104443. https://doi.org/10.1016/j.ijpvp.2021.104443.10.1016/j.ijpvp.2021.104443 ↗
61. Lippold JC, Kotecki DJ. Welding metallurgy and weldability of stainless steels. John Wiley; 2005.
62. Taraphdar PK, Kumar R, Giri A, Pandey C, Mahapatra MM, Sridhar K. Residual stress distribution in thick double-V butt welds with varying groove configuration, restraints and mechanical tensioning. J Manuf Process. 2021;68:1405–17. https://doi.org/10.1016/j.jmapro.2021.06.046.10.1016/j.jmapro.2021.06.046 ↗