journal article·2025-02-12

Spark eroding machining performance, surface textures and optimization strategies for ceramic composites: a review

L. Selvarajan, K. Venkataramanan, K. P. Srinivasa Perumal, C. Arun, Y. Justin Raj, V. Sivakumar, M. Babu, S. Kannan, D. Katherasan, N. Kasthuri

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Additive Manufacturing and 3D Printing Technologies · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Parida AK, Maity K. Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis. Eng Sci Technol Int J. 2017;20(2):687–93.
2. Singh H, Singh J, Kumar S. Effect of processing conditions and electrode materials on the surface roughness of EDM-processed hybrid metal matrix composites. Int J Lightweight Mater Manuf. 2024;7(3):480–93.
3. Obodo RM, Ezugwu S, Ezema F. Introduction: review of the status of modification and functionalization of ceramic composites, progress, and perceptions. Surf Modif Funct Ceram Compos. 2023:1–13.10.1016/B978-0-323-85883-0.00019-3 ↗
4. Jain NK, Jain VK. Modeling of material removal in mechanical type advanced machining processes a state of art review. Int J Mach Tools Manuf. 2001;41(11):1573–635.10.1016/S0890-6955(01)00010-4 ↗
5. Bilal A, Perveen A, Talamona D, et al. Understanding material removal mechanism and effects of machining parameters during EDM of zirconia-toughened alumina ceramic. Micromachines. 2021;12(1):67.10.3390/mi12010067 ↗
6. Lauwers B, Kruth JP, Liu W, et al. Investigation of material removal mechanisms in EDM of composite ceramic materials. J Mater Process Technol. 2004;149(1–3):347–52.10.1016/j.jmatprotec.2004.02.013 ↗
7. Yue X, Yang X, Kunieda M. Influence of metal vapor jets from tool electrode on material removal of workpiece in EDM. Precis Eng. 2018;53:278–88.10.1016/j.precisioneng.2018.04.012 ↗
8. Kou Z, Han F. Machining characteristics and removal mechanisms of moving electric arcs in high-speed EDM milling. J Manuf Process. 2018;32:676–84.10.1016/j.jmapro.2018.03.037 ↗
9. Bhatia K, Singla A, Sharma A, et al. A review on different dielectric fluids and machining of Si3N4 and Al2O3 composites via EDM. In: Advances in industrial and production engineering. Singapore: Springer; 2019. p. 585–96.10.1007/978-981-13-6412-9_57 ↗
10. Tanjilul M, Wee Keong DN, Senthil Kumar A. Super dielectric based EDM process for drilling of Inconel 718. Mater Manuf Process. 2021;36(3):341–50.10.1080/10426914.2020.1832682 ↗
11. Kao JY, Tsao CC, Wang SS, et al. Optimization of the EDM parameters on machining Ti–6Al–4V with multiple quality characteristics. Int J Adv Manuf Technol. 2010;47(1–4):395–402.10.1007/s00170-009-2208-3 ↗
12. Kibria G, Sarkar BR, Pradhan BB, et al. Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti–6Al–4V alloy. Int J Adv Manuf Technol. 2010;48(5–8):557–70.10.1007/s00170-009-2298-y ↗
13. Valaki JB, Rathod PP, Sankhavara CD, et al. Investigations on technical feasibility of Jatropha curcasoil based bio dielectric fluid for sustainable electric discharge machining (EDM). J Manuf Process. 2016;22:151–60.10.1016/j.jmapro.2016.03.004 ↗
14. Mai C, Hocheng H, Huang S. Advantages of carbon nanotubes in electrical discharge machining. Int J Adv Manuf Technol. 2012;59(1–4):111–7.10.1007/s00170-011-3476-2 ↗
15. Kumar NM, Kumaran SS, Kumaraswamidhas LA. An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites. J Alloy Compd. 2015;650:318–27.10.1016/j.jallcom.2015.07.292 ↗
16. Uhlmann E, Schimmelpfennig TM, Perfilov I, et al. Comparative analysis of Dry-EDM and conventional EDM for the manufacturing of micro holes in Si3N4–TiN. Procedia CIRP. 2016;42:173–8.10.1016/j.procir.2016.02.214 ↗
17. Ou S-F, Wang C-Y. Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys. J Mater Process Technol. 2017;245:70–9.10.1016/j.jmatprotec.2017.02.018 ↗
18. Manickavasagam M, Elango T, Selvarajan L, Elangovan K. Maximizing sustainable power: improving bagasse drying efficiency in Indian sugar mills. Biomass Convers Biorefin. 2024:1–23.10.1007/s13399-024-05585-3 ↗
19. Czelusniak T, Higa CF, Torres RD, Laurindo CAH, de Paiva Júnior JMF, Lohrengel A, Amorim FL. Materials used for sinking EDM electrodes: a review. J Braz Soc Mech Sci Eng. 2019;41:1–25.10.1007/s40430-018-1520-y ↗
20. Sundriyal S, Khan MZ, Bundel BR, Khan IA. Study on different types of electric discharge machining methods: a review. Mater Today Proc. 2021;46:6828–34.10.1016/j.matpr.2021.04.419 ↗
21. Uhlmann E, Roehner M. Investigations on reduction of tool electrode wear in micro-EDM using novel electrode materials. CIRP J Manuf Sci Technol. 2008;1(2):92–6.10.1016/j.cirpj.2008.09.011 ↗
22. Ishfaq K, Naveed R, Maqsood MA, Rehman M. Analyzing laminated electrode (s) performance for the EDM of microchannel (s) in Al(6061). Int J Adv Manuf Technol. 2022;123(7):2941–58.10.1007/s00170-022-10360-7 ↗
23. Jiang Yi, Kong L, Ping X, Zhao W. Utilizing a porous-electrode for the flushing fluid in electrical discharge machining. J Manuf Process. 2021;62:248–56.10.1016/j.jmapro.2020.12.012 ↗
24. Pilligrin JC, Asokan P, Jerald J, et al. Effects of electrode materials on performance measures of electrical discharge micro-machining. Mater Manuf Process. 2018;33(6):606–15.10.1080/10426914.2017.1364757 ↗
25. Nair S, Dutta A, Giridharan A. Investigation on EDM machining of Ti6Al4V with negative polarity brass electrode. Mater Manuf Process. 2019;34(16):1824–31.10.1080/10426914.2019.1675891 ↗
26. Fujiki M, Ni J, Shih AJ. Investigation of the effects of electrode orientation and fluid flow rate in near-dry EDM milling. Int J Mach Tools Manuf. 2009;49(10):749–58.10.1016/j.ijmachtools.2009.05.003 ↗
27. Selvarajan L, Rajavel R, Venkataramanan K, Elango T, Dhinagaran M. An experimental investigations and optimization of performance measures in EDM using copper and graphite electrodes. Mater Today Proc. 2020. https://doi.org/10.1016/j.matpr.2020.02.816.10.1016/j.matpr.2020.02.816 ↗
28. Selvarajan L, Senthil Kumar N, Raja R, Sasikumar R, Muralidharan V. Effects of process parameter on performance measures in electrical discharge machining using copper and brass electrodes. Mater Today Proc. 2019;46:9257–62.10.1016/j.matpr.2020.01.551 ↗
29. Markopoulos AP, Papazoglou EL, Svarnias P, et al. An experimental investigation of machining aluminum alloy Al5052 with EDM. Procedia Manuf. 2019;41:787–94.10.1016/j.promfg.2019.09.071 ↗
30. Rino JJ, Chandramohan D, Sucitharan KS, et al. An overview on development of aluminium metal matrix composites with hybrid reinforcement. Int J Sci Res. 2012;1(3).10.21275/IJSR13010104 ↗
31. Li Qi, Yang X. Influence of tool electrode material on material removal and surface integrity in electrical discharge machining. Procedia CIRP. 2020;95:383–8.10.1016/j.procir.2020.01.195 ↗
32. Mohan B, Rajadurai A, Satyanarayana KG. Effect of SiC and rotation of electrode on electric discharge machining of Al ± SiC composite. J Mater Process Technol. 2002;124:297–304.10.1016/S0924-0136(02)00202-9 ↗
33. Beri N, Maheshwari S, Sharma C, et al. Technological advancement in electrical discharge machining with powder metallurgy processed electrodes: a review. Mater Manuf Process. 2010;25:1186–97.10.1080/10426914.2010.512647 ↗
34. Kumar PM, Sivakumar K, Selvarajan L. EDM machining effectiveness for Ti–6Al–4V alloy using Cu–TiB2 ceramic composite electrode: a parametric evaluation. Ceram Int. 2024.
35. Dhakar K, Chaudhary K, Dvivedi A, et al. An environment-friendly and sustainable machining method: near-dry EDM. Mater Manuf Process. 2019;34(12):1307–15.10.1080/10426914.2019.1643471 ↗
36. Daneshmand S, Kahrizi EF, Akbar A, et al. Experimental investigations into electro discharge machining of NiTi shape memory alloys using rotational tool. Int J Electrochem Sci. 2013;8:7484–97.10.1016/S1452-3981(23)12820-3 ↗
37. Malhotra P, Tyagi RK, Singh NK, et al. Experimental investigation and effects of process parameters on EDM of Al7075/SiC composite reinforced with magnesium particles. Mater Today Proc. 2020;21:1496–501.10.1016/j.matpr.2019.11.069 ↗
38. Dewangan S, Deepak Kumar S, Kumar Jha S, Kumar Biswas C. Optimization of micro-EDM drilling parameters of Ti–6Al–4V alloy. Mater Today Proc. 2020;33:5481–5.10.1016/j.matpr.2020.03.307 ↗
39. Muthuramalingam T, Mohan B. Performance analysis of iso current pulse generator on machining characteristics in EDM process. Arch Civ Mech Eng. 2014;14(3):383–90.10.1016/j.acme.2013.10.003 ↗
40. Singh MA, Rajbongshi SK, Sarma DK, et al. Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites. Mater Manuf Process. 2009;34(5):567–79.10.1080/10426914.2019.1566617 ↗
41. Tiwary AP, Pradhan BB, Bhattacharyya B. Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V. Mater Manuf Process. 2019;34(10):1103–19.10.1080/10426914.2019.1628265 ↗
42. Dilip DG, Panda S, Mathew J. Characterization and parametric optimization of micro-hole surfaces in micro-EDM drilling on Inconel 718 superalloy using genetic algorithm. Arab J Sci Eng. 2020;45(7):5057–74.10.1007/s13369-019-04325-4 ↗
43. D’Urso G, Giardini C, Lorenzi S, et al. Micro-EDM milling of zirconium carbide ceramics. Precis Eng. 2020;65:156–63.10.1016/j.precisioneng.2020.06.002 ↗
44. Singh AK, Patowari PK, Deshpande NV. Experimental analysis of reverse micro-EDM for machining microtool. Mater Manuf Process. 2016;31(4):530–40.10.1080/10426914.2015.1070426 ↗
45. Roy T, Datta D, Balasubramaniam R. Numerical modelling, simulation and fabrication of 3-D hemi-spherical convex micro features using reverse micro EDM. J Manuf Process. 2018;32:344–56.10.1016/j.jmapro.2018.02.018 ↗
46. Mazarbhuiya RM, Rahang M. Reverse EDM process for pattern generation using powder metallurgical green compact tool. Mater Manuf Process. 2020;35(15):1741–8.10.1080/10426914.2020.1802036 ↗
47. Mussada EK, Hua CC, Rao AK. Surface hardenability studies of the die steel machined by WEDM. Mater Manuf Process. 2018;33(16):1745–50.10.1080/10426914.2018.1476695 ↗
48. Goswami A, Kumar J. Optimization in wire-cut EDM of Nimonic-80A using Taguchi’s approach and utility concept. Eng Sci Technol Int J. 2014;17(4):236–46.
49. Kung K-Y, Chiang K-T. Modeling and analysis of machinability evaluation in the wire electrical discharge machining (WEDM) process of aluminum oxide-based ceramic. Mater Manuf Process. 2008;23(3):241–50.10.1080/10426910701860616 ↗
50. Antara MT, Sooa SL, Aspinwalla DK, et al. Productivity and workpiece surface integrity when WEDM aerospace alloys using coated wires. Procedia Eng. 2011;19:3–8.10.1016/j.proeng.2011.11.071 ↗
51. Durairaj M, Sudharsun D, Swamynathan N. Analysis of process parameters in wire EDM with stainless steel using single objective Taguchi method and multi objective grey relational grade. Procedia Eng. 2013;64:868–77.10.1016/j.proeng.2013.09.163 ↗
52. Subrahmanyam M, Nancharaiah T. Optimization of process parameters in wire-cut EDM of Inconel 625 using Taguchi’s approach. Mater Today Proc. 2020;23:642–6.10.1016/j.matpr.2019.05.449 ↗
53. Shabgard MR, Alenabi H. Ultrasonic assisted electrical discharge machining of Ti–6Al–4V alloy. Mater Manuf Process. 2015;30(8):991–1000.10.1080/10426914.2015.1004686 ↗
54. Shervani-Tabar MT, Maghsoudi K, Shabgard MR. Effects of simultaneous ultrasonic vibration of the tool and the workpiece in ultrasonic assisted EDM. Int J Comput Methods Eng Sci Mech. 2013;14(1):1–9.10.1080/15502287.2012.698696 ↗
55. Gugulothu B. Optimization of process parameters on EDM of titanium alloy. Mater Today Proc. 2020;27:257–62.10.1016/j.matpr.2019.10.150 ↗
56. Coteata M, Besliu IB, Slatineanu L. Tungten copper composite machinability by electrical discharge machining. Procedia Manuf. 2020;47:804–7.10.1016/j.promfg.2020.04.248 ↗
57. Saravanan S, Senthilkumar P, Ravichandran M, et al. Wire electrical discharge machining of AA6063-TiC particle reinforced metal matrix composites using Taguchi method. Mater Res Express. 2018;5(10): 106518.10.1088/2053-1591/aadab7 ↗
58. Dhanabalan S, Sivakumar K, Narayanan CS. Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance. Indian J Eng Mater Sci. 2013;20:391–7.
59. Kumar S, Dhanabalan S. Influence on machinability and form tolerance of Inconel 718 in Edm using different diameter multi hole Cu electrodes. SN Appl Sci. 2019;1(5):1–17.
60. Selvarajan L, Narayanan CS, Jeyapaul R. Optimization of EDM parameters on machining Si3N4–TiN composite for improving circularity, cylindricity, and perpendicularity. Mater Manuf Process. 2016;31:405–12.10.1080/10426914.2015.1058947 ↗
61. Selvarajan L, Venkataramanan K, Srinivasa Perumal KP, Yunus M, Alfattani R, Aravindhan A. A review of spark erosion machining efficiency, characterization and optimization techniques for ceramic composites. Compos Interfaces. 2024;31(4):485–536.10.1080/09276440.2023.2268967 ↗
62. Senthilkumar TS, Muralikannan R. Enhancing the geometric tolerance of aluminium hybrid metal matrix composite using EDM process. J Braz Soc Mech Sci Eng. 2019;41:1–15.10.1007/s40430-018-1553-2 ↗
63. Selvarajan L, Venkataramanan K, Nair A, Choudhury B. Si3N4–TiN rotary EDM optimization by Mo-Jaya algorithm with Pareto optimal solution, analysis of micro-structural and geometrical tolerances. J Mech Behav Biomed Mater. 2023;145:105995.10.1016/j.jmbbm.2023.105995 ↗
64. Ahmad N, Sueyoshi H. Microstructure and mechanical properties of silicon nitride–titanium nitride composites prepared by spark plasma sintering. Mater Res Bull. 2011;46:460–3.10.1016/j.materresbull.2010.11.021 ↗
65. Murugan C, Kumar RS, Alagarsamy SV. Investigations on electric discharge machining behaviour of Si3N4–TiN ceramic composite. Silicon. 2020;14(2):547–55.10.1007/s12633-020-00848-w ↗
66. Zhou M, Zhong J, Zhao J, Rodrigo D, Cheng Y-B. Microstructures and properties of Si3N4/TiN composites sintered by hot pressing and spark plasma sintering. Mater Res Bull. 2013;48(5):1927–33.10.1016/j.materresbull.2013.01.045 ↗
67. Kumar SR, Srinivasan VP, Balamurugan S, Dinesh Krishnaa S, Gokul V, Anudeep S. Optimization of machine machining parameters in EDM of silicon nitride-titanium nitride based on RSM. Mater Today Proc. 2021;45:1312–8.10.1016/j.matpr.2020.05.429 ↗
68. Srinivasan VP, Palani PK, Selvarajan L. Experimental investigation on electrical discharge machining of ceramic composites (Si3N4–TiN) using RSM. Int J Comput Mater Sci Surf Eng. 2018;7(2):104–15.
69. Selvarajan L, Rajavel R, Prakash B, Mohan DG, Gopi S. Investigation on spark electrical discharge machining of Si3N4 based advanced conductive ceramic composites. Mater Today Proc. 2020;27:2174–8.10.1016/j.matpr.2019.09.090 ↗
70. Selvarajan L, Rajavel R, Venkataramanan K, Srinivasan VP. Experimental investigation on surface morphology and recasting layer of Si3N4–TiN composites machined by die-sinking and rotary EDM. Ceram Int. 2023;49(5):8487–501. https://doi.org/10.1016/j.ceramint.2022.11.011.10.1016/j.ceramint.2022.11.011 ↗
71. Selvarajan L, Venkataramanan K. Surface morphology and drilled hole accuracy of conductive ceramic composites Si3N4–TiN and MoSi2–SiC on EDMed surfaces. Wear. 2023;39(15):2006–17.
72. Manikandan KP, Thirugnanam S, Selvarajan L, Senthilkumar TS. Study of correlation of machining performance and geometrical tolerances of Si3N4–TiN composites using EDM process. Silicon. 2024:1–21.10.21203/rs.3.rs-3636900/v1 ↗
73. Selvarajan L, Venkataramanan K. Si3N4–TiN conductive ceramic composites: topography on EDMed surfaces and precise drilled holes. Mater Sci Technol. 2023;39(15):2006–17.10.1080/02670836.2023.2187156 ↗
74. Lakshmanan S, Rajendran R, Shanmugakani SK, Krishnamoorthy V. Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology. Proc Inst Mech Eng Part E J Process Mech Eng. 2024;238(6):2917–40.10.1177/09544089231166303 ↗
75. Rajavel R, Selvarajan L, Rajkumar G, Raja R, Rakshna A. Investigation on machinability of Al 2024 & 7.5% Si3N4 metal matrix composite with PMEDM using Taguchi based GRA. Mater Today Proc. 2021;46:9449–53.10.1016/j.matpr.2020.03.234 ↗
76. Selvarajan L, Mouri P, Ramesh Raja R. Experimental investigation of EDM parameters on machining Si3N4–TiN conductive ceramic composite using hallow tube electrode for improving geometrical accuracy. Mater Today Proc. 2018;5(2):8080–8.10.1016/j.matpr.2017.11.494 ↗
77. Selvarajan L, Venkataramanan K, Senthilkumar TS. Experimental investigation and optimization of EDM performance measures of MoSi2–SiC intermetallic ceramic composite using RSM with regression equations. SILICON. 2023;15:1747–69. https://doi.org/10.1007/s12633-022-02093-9.10.1007/s12633-022-02093-9 ↗
78. Selvarajan L, Venkataramanan K, Nair A, Srinivasan VP. Simultaneous multi-response Jaya optimization and Pareto front visualization in EDM drilling of MoSi2–SiC composites. Expert Syst Appl. 2023;230:120669.10.1016/j.eswa.2023.120669 ↗
79. Alfattani R, Yunus M, Selvarajan L, Venkataramanan K. Spark erosion behavior in the machining of MoSi2–SiC ceramic composites for improving dimensional accuracy. J Mech Behav Biomed Mater. 2023;148:106166.10.1016/j.jmbbm.2023.106166 ↗
80. Petrovic JJ. Mechanical behavior of MoSi2 and MoSi2 composites. Mater Sci Eng. 1995;192(193):31–7.10.1016/0921-5093(94)03246-7 ↗
81. Gao JY, Jiang W. Effect of La2O3 addition to modification of grain–boundary phase in MoSi2. J Alloy Compd. 2009;476:667–70.10.1016/j.jallcom.2008.09.076 ↗
82. Zakeri M, Ramezani M. Synthesis of MoSi2–TiC nanocomposite powder via mechanical alloying and subsequent annealing. Ceram Int. 2012;38(2):1353–7.10.1016/j.ceramint.2011.09.012 ↗
83. Ferraris E, Reynaerts D, Lauwers B. Micro-EDM process investigation and comparison performance of Al3O2 and ZrO2 based ceramic composites. CIRP Ann. 2011;60(1):235–8.10.1016/j.cirp.2011.03.131 ↗
84. Patel KM, Pandey PM, Rao PV. Determination of an optimum parametric combination using a surface roughness prediction model for EDM of Al2O3/SiCw/TiC ceramic composite. Mater Manuf Process. 2009;24:675–82.10.1080/10426910902769319 ↗
85. He R, Tong Z, Zhang K, Fang D. Mechanical and electrical properties of MoSi2-based ceramics with various ZrB2-20 vol% SiC as additives for ultra high temperature heating element. Ceram Int. 2018;44(1):1041–5.10.1016/j.ceramint.2017.10.043 ↗
86. Sciti D, Monteverde F, Guicciardi S, et al. Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques. Mater Sci Eng. 2006;434:303–9.10.1016/j.msea.2006.06.112 ↗
87. Selvarajan L, Rajavel R, Nair A, Chandrasekaran M. Testing and evaluation of the spark erosion parameter for machining intermetallic ceramic composite for enhancing drilled hole accuracy. J Test Eval. 2024;52(1):JTE20220685.10.1520/JTE20220685 ↗
88. Selvarajan L, Rajavel R, Yunus M, Alfattani R. Die-sinking and rotary EDM surface and subsurface analysis of MoSi2–SiC ceramic composites. Mater Sci Technol. 2023;39(18):3150–66.10.1080/02670836.2023.2240103 ↗
89. Selvarajan L, Rajavel R, Arun C, Raju C. Experimental analysis and surface morphology of holes made by electrical discharge machining on MoSi2–SiC composite. J Mater Eng Perform. 2023;33:12375–97.10.1007/s11665-023-09000-2 ↗
90. Selvarajan L, Venkataramanan K, Nair A, Senthilkumar TS. Enhanced Jaya optimization in electrical discharge hole making of MoSi2–SiC composite with surface morphology analysis. J Braz Soc Mech Sci Eng. 2023;45(10):555.10.1007/s40430-023-04493-3 ↗
91. Selvarajan L, Sathiya Narayanan C, Jeyapaul R. Optimization of EDM hole drilling parameters in machining of MoSi 2–SiC intermetallic/composites for improving geometrical tolerances. J Adv Manuf Syst. 2015;14(04):259–72.10.1142/S0219686715500171 ↗
92. Kumar S, Verma A. Surface modification during electrical discharge machining process—a review. Mater Today Proc. 2020;46:5228–32.10.1016/j.matpr.2020.08.596 ↗
93. Gudipudi S, Nagamuthu S, Subbian KS, et al. Fabrication and experimental study to optimize the recast layer and the material removal in electric discharge machining (EDM) of AA6061-B4C composite. Mater Today Proc. 2019;19:448–54.10.1016/j.matpr.2019.07.634 ↗
94. Thangarasu A, Murugan N, Dinaharan I, Vijay SJ. Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing. Arch Civ Mech Eng. 2015;15(2):324–34.10.1016/j.acme.2014.05.010 ↗
95. Torres A, Luis CJ, Puertas I. EDM machinability and surface roughness analysis of TiB2 using copper electrodes. J Alloy Compd. 2017;690:337–47.10.1016/j.jallcom.2016.08.110 ↗
96. Guu YH, Hocheng H, Chou CY, Deng CS. Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel. Mater Sci Eng A. 2003;358:37–43.10.1016/S0921-5093(03)00272-7 ↗
97. Selvarajan L, Venkataramanan K. Evaluations of surface morphology in EDMed MoSi2–SiC intermetallic ceramic composite surfaces. J Adhes Sci Technol. 2024;38(2):225–47.10.1080/01694243.2023.2225250 ↗
98. Sivaraj M, Rajkumar S, Muthuraman S. Parametric optimization of electrical discharge machining on AI-TiC composites using Grey relational analysis. Mater Today Proc. 2021;37:1254–63.10.1016/j.matpr.2020.06.437 ↗
99. Zhang Y, Liu Y, Ji R, Cai B. Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric. Appl Surf Sci. 2011;257(14):5989–97.10.1016/j.apsusc.2011.01.083 ↗
100. Chen SL, Yan BH, Huang FY. Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti–6A1–4V. J Mater Process Technol. 1999;87(1):107–11.10.1016/S0924-0136(98)00340-9 ↗