journal article·2025-01-28

Review on compressive strength and durability of fly-ash-based geopolymers using characterization techniques

Kailash Kumar Singaram, Mohd Ataullah Khan, Visalakshi Talakokula

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Danish A, Ozbakkaloglu T, Ali Mosaberpanah M, Salim MU, Bayram M, Yeon JH, Jafar K. Sustainability benefits and commercialization challenges and strategies of geopolymer concrete: a review. J Build Eng. 2022;58: 105005. https://doi.org/10.1016/j.jobe.2022.105005.10.1016/j.jobe.2022.105005 ↗
2. Assi LN, Carter K, Deaver E, Ziehl P. Review of availability of source materials for geopolymer/sustainable concrete. J Clean Prod. 2020;263: 121477. https://doi.org/10.1016/j.jclepro.2020.121477.10.1016/j.jclepro.2020.121477 ↗
3. Choudhary L, Sahu V, Dongre A. Mechanical, microstructural and leachability characteristics of ternary geopolymer mortar: a step towards carbon neutral materials. Environ Dev Sustain. 2024. https://doi.org/10.1007/s10668-024-04727-x.10.1007/s10668-024-04727-x ↗
4. Sharkawi A, Taman M, Afefy HM, Hegazy Y. Efficiency of geopolymer vs. high-strength grout as repairing material for reinforced cementitious elements. Structures. 2020;27:330–42. https://doi.org/10.1016/j.istruc.2020.06.001.10.1016/j.istruc.2020.06.001 ↗
5. Rickard WDA, Temuujin J, van Riessen A. Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition. J Non Cryst Solids. 2012;358:1830–9. https://doi.org/10.1016/j.jnoncrysol.2012.05.032.10.1016/j.jnoncrysol.2012.05.032 ↗
6. Rihan MAM, Abdalla Abdalla T. factors influencing compressive strength in fly ash-based geopolymer concrete: a comprehensive review, Iran. J Sci Technol Trans Civ Eng. 2024. https://doi.org/10.1007/s40996-024-01413-w.10.1007/s40996-024-01413-w ↗
7. Duque-Redondo E, Yamada K, Masoero E, Bañuelos Prieto J, Manzano H. Adsorption and migration of Cs and Na ions in geopolymers and zeolites. Mater Today Commun. 2023;36: 106496. https://doi.org/10.1016/j.mtcomm.2023.106496.10.1016/j.mtcomm.2023.106496 ↗
8. Grant Norton M, Provis JL. 1000 at 1000: geopolymer technology—the current state of the art. J Mater Sci. 2020;55:13487–9. https://doi.org/10.1007/s10853-020-04990-z.10.1007/s10853-020-04990-z ↗
9. Alghamdi H, Neithalath N. Novel synthesis of lightweight geopolymer matrices from fly ash through carbonate-based activation. Mater Today Commun. 2018;17:266–77. https://doi.org/10.1016/j.mtcomm.2018.09.014.10.1016/j.mtcomm.2018.09.014 ↗
10. Gopalakrishna B, Dinakar P. An innovative approach to fly ash-based geopolymer concrete mix design: Utilizing 100 % recycled aggregates. Structures. 2024;66: 106819. https://doi.org/10.1016/j.istruc.2024.106819.10.1016/j.istruc.2024.106819 ↗
11. Abbass M, Singh G. Experimental investigation of alkali-activated hybrid geopolymer concrete. Multiscale Multidiscip Model Exp Des. 2023;6:235–49. https://doi.org/10.1007/s41939-023-00144-1.10.1007/s41939-023-00144-1 ↗
12. Singh RP, Vanapalli KR, Cheela VRS, Peddireddy SR, Sharma HB, Mohanty B. Fly ash, GGBS, and silica fume based geopolymer concrete with recycled aggregates: properties and environmental impacts. Constr Build Mater. 2023;378: 131168. https://doi.org/10.1016/j.conbuildmat.2023.131168.10.1016/j.conbuildmat.2023.131168 ↗
13. Gaurav G, Kandpal SC, Mishra D, Kotoky N. A comprehensive review on fly ash-based geopolymer: a pathway for sustainable future. J Sustain Cem Mater. 2024;13:100–44. https://doi.org/10.1080/21650373.2023.2258122.10.1080/21650373.2023.2258122 ↗
14. Choudhary L. Structural behavior of sustainable ternary geopolymer concrete and strength prediction using machine learning, 2024. http://hdl.handle.net/10603/586035.10.2139/ssrn.4940465 ↗
15. Swathi B, Vidjeapriya R. Influence of precursor materials and molar ratios on normal, high, and ultra-high performance geopolymer concrete—a state of art review. Constr Build Mater. 2023;392: 132006. https://doi.org/10.1016/j.conbuildmat.2023.132006.10.1016/j.conbuildmat.2023.132006 ↗
16. Fantilli AP, Jóźwiak-Niedźwiedzka D. Special issue: Supplementary cementitious materials in concrete, part I. Materials (Basel). 2021;14:1–6. https://doi.org/10.3390/ma14092291.10.3390/ma14092291 ↗
17. Nagalia G, Park Y, Abolmaali A, Aswath P. Compressive strength and microstructural properties of fly ash-based geopolymer concrete. J Mater Civ Eng. 2016;28:04016144. https://doi.org/10.1061/(asce)mt.1943-5533.0001656.10.1061/(asce)mt.1943-5533.0001656 ↗
18. Hardjito D, Wallah SE, Rangan BV. Fly ash-based geopolymer concrete. Aust J Struct Eng. 2005;6:77–86. https://doi.org/10.1080/13287982.2005.11464946.10.1080/13287982.2005.11464946 ↗
19. Davidovits J. Geopolymers and geopolymeric materials. J Therm Anal. 1989;35:429–41. https://doi.org/10.1007/BF01904446.10.1007/BF01904446 ↗
20. Inti S, Sharma M, Tandon V. Influence of curing on the properties of geopolymer mortar made with low molarity sodium hydroxide. Transp Dev Econ. 2017;3:11. https://doi.org/10.1007/s40890-017-0042-0.10.1007/s40890-017-0042-0 ↗
21. Bakharev T. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing. Cem Concr Res. 2005;35:1224–32. https://doi.org/10.1016/j.cemconres.2004.06.031.10.1016/j.cemconres.2004.06.031 ↗
22. Sherwani AFH, Younis KH, Arndt RW. Fresh, mechanical, and durability behavior of fly ash-based self compacted geopolymer concrete: effect of slag content and various curing conditions. Polymers (Basel). 2022;14:3209. https://doi.org/10.3390/polym14153209.10.3390/polym14153209 ↗
23. Ryu GS, Lee YB, Koh KT, Chung YS. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators. Constr Build Mater. 2013;47:409–18. https://doi.org/10.1016/j.conbuildmat.2013.05.069.10.1016/j.conbuildmat.2013.05.069 ↗
24. Amran M, Debbarma S, Ozbakkaloglu T. Fly ash-based eco-friendly geopolymer concrete: a critical review of the long-term durability properties. Constr Build Mater. 2021;270: 121857. https://doi.org/10.1016/j.conbuildmat.2020.121857.10.1016/j.conbuildmat.2020.121857 ↗
25. Skariah Thomas B, Yang J, Bahurudeen A, Chinnu SN, Abdalla JA, Hawileh RA, Hamada HM. Geopolymer concrete incorporating recycled aggregates: a comprehensive review. Clean Mater. 2022;3: 100056. https://doi.org/10.1016/j.clema.2022.100056.10.1016/j.clema.2022.100056 ↗
26. Singh RP, Reddy PS, Vanapalli KR, Mohanty B. Influence of binder materials and alkali activator on the strength and durability properties of geopolymer concrete: a review. Mater Today Proc. 2023. https://doi.org/10.1016/j.matpr.2023.05.226.10.1016/j.matpr.2023.05.226 ↗
27. Luhar I, Luhar S. A comprehensive review on fly ash-based geopolymer. J Compos Sci. 2022;6:1–59. https://doi.org/10.3390/jcs6080219.10.3390/jcs6080219 ↗
28. Behera M, Bhattacharyya SK, Minocha AK, Deoliya R, Maiti S. Recycled aggregate from C&D waste & its use in concrete—a breakthrough towards sustainability in construction sector: a review. Constr Build Mater. 2014;68:501–16. https://doi.org/10.1016/J.CONBUILDMAT.2014.07.003.10.1016/J.CONBUILDMAT.2014.07.003 ↗
29. Panizza M, Natali M, Garbin E, Ducman V, Tamburini S. Optimization and mechanical-physical characterization of geopolymers with construction and demolition waste (CDW) aggregates for construction products. Constr Build Mater. 2020;264: 120158. https://doi.org/10.1016/j.conbuildmat.2020.120158.10.1016/j.conbuildmat.2020.120158 ↗
30. Jin R, Yuan H, Chen Q. Science mapping approach to assisting the review of construction and demolition waste management research published between 2009 and 2018. Resour Conserv Recycl. 2019;140:175–88. https://doi.org/10.1016/J.RESCONREC.2018.09.029.10.1016/J.RESCONREC.2018.09.029 ↗
31. Akbarnezhad A, Huan M, Mesgari S, Castel A. Recycling of geopolymer concrete. Constr Build Mater. 2015;101:152–8. https://doi.org/10.1016/J.CONBUILDMAT.2015.10.037.10.1016/J.CONBUILDMAT.2015.10.037 ↗
32. Nuaklong P, Wongsa A, Sata V, Boonserm K, Sanjayan J, Chindaprasirt P. Properties of high-calcium and low-calcium fly ash combination geopolymer mortar containing recycled aggregate. Heliyon. 2019;5: e02513. https://doi.org/10.1016/j.heliyon.2019.e02513.10.1016/j.heliyon.2019.e02513 ↗
33. Singh B, Ishwarya G, Gupta M, Bhattacharyya SK. Geopolymer concrete: a review of some recent developments. Constr Build Mater. 2015;85:78–90. https://doi.org/10.1016/j.conbuildmat.2015.03.036.10.1016/j.conbuildmat.2015.03.036 ↗
34. Khambra G, Shukla P. Novel machine learning applications on fly ash based concrete: an overview. Mater Today Proc. 2023;80:3411–7. https://doi.org/10.1016/j.matpr.2021.07.262.10.1016/j.matpr.2021.07.262 ↗
35. Dibyendu A, Saroj M. Strength and durability performance of fly ash-based process-modified geopolymer concrete. J Mater Civ Eng. 2019;31:4019174. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002793.10.1061/(ASCE)MT.1943-5533.0002793 ↗
36. Duan P, Yan C, Luo W, Zhou W. Effects of adding nano-TiO2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste. Constr Build Mater. 2016;106:115–25. https://doi.org/10.1016/J.CONBUILDMAT.2015.12.095.10.1016/J.CONBUILDMAT.2015.12.095 ↗
37. Çevik A, Alzeebaree R, Humur G, Niş A, Gülşan ME. Effect of nano-silica on the chemical durability and mechanical performance of fly ash based geopolymer concrete. Ceram Int. 2018;44:12253–64. https://doi.org/10.1016/j.ceramint.2018.04.009.10.1016/j.ceramint.2018.04.009 ↗
38. Pasupathy K, Berndt M, Castel A, Sanjayan J, Pathmanathan R. Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8 years. Constr Build Mater. 2016;125:661–9. https://doi.org/10.1016/J.CONBUILDMAT.2016.08.078.10.1016/J.CONBUILDMAT.2016.08.078 ↗
39. Law D, Adam A, Molyneaux T, Patnaikuni I, Wardhono A. Long term durability properties of class F fly ash geopolymer concrete. Mater Struct. 2014;48:721–31. https://doi.org/10.1617/s11527-014-0268-9.10.1617/s11527-014-0268-9 ↗
40. Bakharev T. Durability of geopolymer materials in sodium and magnesium sulfate solutions. Cem Concr Res. 2005;35:1233–46. https://doi.org/10.1016/J.CEMCONRES.2004.09.002.10.1016/J.CEMCONRES.2004.09.002 ↗
41. Ojha A, Aggarwal P. Fly ash based geopolymer concrete: a comprehensive review. SILICON. 2022;14:2453–72. https://doi.org/10.1007/s12633-021-01044-0.10.1007/s12633-021-01044-0 ↗
42. Alzeebaree R, Çevik A, Mohammedameen A, Niş A, Gülşan ME. Mechanical performance of FRP-confined geopolymer concrete under seawater attack. Adv Struct Eng. 2020;23:1055–73. https://doi.org/10.1177/1369433219886964.10.1177/1369433219886964 ↗
43. Alzeebaree R, Gülsan ME, Nis A, Mohammedameen A, Cevik A. Performance of FRP confined and unconfined geopolymer concrete exposed to sulfate attacks. Steel Compos Struct. 2018;29:201–18. https://doi.org/10.12989/scs.2018.29.2.201.10.12989/scs.2018.29.2.201 ↗
44. Aiken TA, Kwasny J, Sha W. Resistance of fly ash geopolymer binders to organic acids. Mater Struct. 2020;53:115. https://doi.org/10.1617/s11527-020-01549-x.10.1617/s11527-020-01549-x ↗
45. Rattanasak U, Chindaprasirt P. Influence of NaOH solution on the synthesis of fly ash geopolymer. Miner Eng. 2009;22:1073–8. https://doi.org/10.1016/j.mineng.2009.03.022.10.1016/j.mineng.2009.03.022 ↗
46. Adak D, Asce AM, Mandal S. Strength and durability performance of fly ash-based process-modified geopolymer. Concrete. 2019. https://doi.org/10.1061/(ASCE).10.1061/(ASCE) ↗
47. Görhan G, Kürklü G. The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures. Compos Part B Eng. 2014;58:371–7. https://doi.org/10.1016/J.COMPOSITESB.2013.10.082.10.1016/J.COMPOSITESB.2013.10.082 ↗
48. Ariyadasa PW, Manalo AC, Lokuge W, Aravinthan V, Pasupathy K, Gerdes A. Bond performance of fly ash-based geopolymer mortar in simulated concrete sewer substrate. Constr Build Mater. 2024;446: 137927. https://doi.org/10.1016/j.conbuildmat.2024.137927.10.1016/j.conbuildmat.2024.137927 ↗
49. Rattanasak U, Chindaprasirt P. Influence of NaOH solution on the synthesis of fly ash geopolymer. Miner Eng Min Eng. 2009;22:1073–8. https://doi.org/10.1016/j.mineng.2009.03.022.10.1016/j.mineng.2009.03.022 ↗
50. Chindaprasirt P, Chareerat T, Sirivivatnanon V. Workability and strength of coarse high calcium fly ash geopolymer. Cem Concr Compos. 2007;29:224–9. https://doi.org/10.1016/J.CEMCONCOMP.2006.11.002.10.1016/J.CEMCONCOMP.2006.11.002 ↗
51. Rathnayaka M, Karunasinghe D, Gunasekara C, Wijesundara K, Lokuge W, Law DW. Machine learning approaches to predict compressive strength of fly ash-based geopolymer concrete: a comprehensive review. Constr Build Mater. 2024;419: 135519. https://doi.org/10.1016/j.conbuildmat.2024.135519.10.1016/j.conbuildmat.2024.135519 ↗
52. Kumar S, Kristály F, Mucsi G. Geopolymerisation behaviour of size fractioned fly ash. Adv Powder Technol. 2015;26:24–30. https://doi.org/10.1016/J.APT.2014.09.001.10.1016/J.APT.2014.09.001 ↗
53. Joseph B, Mathew G. Influence of aggregate content on the behavior of fly ash based geopolymer concrete. Sci Iran. 2012;19:1188–94. https://doi.org/10.1016/j.scient.2012.07.006.10.1016/j.scient.2012.07.006 ↗
54. Nematollahi B, Sanjayan J. Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer. Mater Des. 2014;57:667–72. https://doi.org/10.1016/J.MATDES.2014.01.064.10.1016/J.MATDES.2014.01.064 ↗
55. Toobpeng N, Thavorniti P, Jiemsirilers S. Effect of additives on the setting time and compressive strength of activated high-calcium fly ash-based geopolymers. Constr Build Mater. 2024;417: 135035. https://doi.org/10.1016/j.conbuildmat.2024.135035.10.1016/j.conbuildmat.2024.135035 ↗
56. Stankiewicz N. Effect of admixtures on selected properties of fly ash-based geopolymer composites. Appl Sci. 2023. https://doi.org/10.3390/app13031803.10.3390/app13031803 ↗
57. John SK, Nadir Y, Girija K. Effect of source materials, additives on the mechanical properties and durability of fly ash and fly ash-slag geopolymer mortar: a review. Constr Build Mater. 2021;280: 122443. https://doi.org/10.1016/j.conbuildmat.2021.122443.10.1016/j.conbuildmat.2021.122443 ↗
58. Ojha A, Aggarwal P. Durability performance of low calcium Flyash-Based geopolymer concrete. Structures. 2023;54:956–63. https://doi.org/10.1016/j.istruc.2023.05.115.10.1016/j.istruc.2023.05.115 ↗
59. Mehta A, Siddique R. Sulfuric acid resistance of fly ash based geopolymer concrete. Constr Build Mater. 2017;146:136–43. https://doi.org/10.1016/J.CONBUILDMAT.2017.04.077.10.1016/J.CONBUILDMAT.2017.04.077 ↗
60. Yang S, Zhao R, Ma B, Si R, Zeng X. Mechanical and fracture properties of fly ash-based geopolymer concrete with different fibers. J Build Eng. 2023;63: 105281. https://doi.org/10.1016/j.jobe.2022.105281.10.1016/j.jobe.2022.105281 ↗
61. Yousefi Oderji S, Chen B, Jaffar STA. Effects of relative humidity on the properties of fly ash-based geopolymers. Constr Build Mater. 2017;153:268–73. https://doi.org/10.1016/J.CONBUILDMAT.2017.07.115.10.1016/J.CONBUILDMAT.2017.07.115 ↗
62. Hadi MNS, Zhang H, Parkinson S. Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability. J Build Eng. 2019;23:301–13. https://doi.org/10.1016/J.JOBE.2019.02.006.10.1016/J.JOBE.2019.02.006 ↗
63. Davidovits J. Geopolymers. J Therm Anal. 1991;37:1633–56. https://doi.org/10.1007/BF01912193.10.1007/BF01912193 ↗
64. Firdous R, Nikravan M, Mancke R, Vöge M, Stephan D. Assessment of environmental, economic and technical performance of geopolymer concrete: a case study. J Mater Sci. 2022;57:18711–25. https://doi.org/10.1007/s10853-022-07820-6.10.1007/s10853-022-07820-6 ↗
65. Van Jaarsveld JGS, Van Deventer JSJ, Lukey GC. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers. Chem Eng J. 2002;89:63–73. https://doi.org/10.1016/S1385-8947(02)00025-6.10.1016/S1385-8947(02)00025-6 ↗
66. Lizcano M, Kim HS, Basu S, Radovic M. Mechanical properties of sodium and potassium activated metakaolin-based geopolymers. J Mater Sci. 2012;47:2607–16. https://doi.org/10.1007/s10853-011-6085-4.10.1007/s10853-011-6085-4 ↗
67. Fu Q, Xu W, Zhao X, Bu MX, Yuan Q, Niu D. The microstructure and durability of fly ash-based geopolymer concrete: a review. Ceram Int. 2021;47:29550–66. https://doi.org/10.1016/j.ceramint.2021.07.190.10.1016/j.ceramint.2021.07.190 ↗
68. Sadat MR, Bringuier S, Muralidharan K, Runge K, Asaduzzaman A, Zhang L. An atomistic characterization of the interplay between composition, structure and mechanical properties of amorphous geopolymer binders. J Non Cryst Solids. 2016;434:53–61. https://doi.org/10.1016/j.jnoncrysol.2015.11.022.10.1016/j.jnoncrysol.2015.11.022 ↗
69. Venkatesan G, Alengaram UJ, Ibrahim S, Ibrahim MSI. Effect of Fly Ash characteristics, sodium-based alkaline activators, and process variables on the compressive strength of siliceous Fly Ash geopolymers with microstructural properties: a comprehensive review. Constr Build Mater. 2024;437: 136808. https://doi.org/10.1016/j.conbuildmat.2024.136808.10.1016/j.conbuildmat.2024.136808 ↗
70. Niş A, Altındal İ. Compressive strength performance of alkali activated concretes under different curing conditions. Period Polytech Civ Eng. 2021;65:556–65. https://doi.org/10.3311/PPci.17016.10.3311/PPci.17016 ↗
71. Singh GVPB, Subramaniam KVL. Influence of processing temperature on the reaction product and strength gain in alkali-activated fly ash. Cem Concr Compos. 2019;95:10–8. https://doi.org/10.1016/j.cemconcomp.2018.10.010.10.1016/j.cemconcomp.2018.10.010 ↗
72. Visalakshi T, Singh R, Karunakaran V. Effect of delay time and duration of steam curing on compressive strength and microstructure of fly ash based geopolymer concrete. Indian Concr J. 2015;89:69–72. https://doi.org/10.1007/978-81-322-2187-6_124.10.1007/978-81-322-2187-6_124 ↗
73. Kumar S, Kumar R, Alex TC, Bandopadhyay A, Mehrotra SP. Influence of reactivity of fly ash on geopolymerisation. Adv Appl Ceram. 2007;106:120–7. https://doi.org/10.1179/174367607X159293.10.1179/174367607X159293 ↗
74. Cui Y, Wang D, Wang Y, Sun R, Rui Y. Effects of the n(H2O: Na2Oeq) ratio on the geopolymerization process and microstructures of fly ash-based geopolymers. J Non Cryst Solids. 2019;511:19–28. https://doi.org/10.1016/j.jnoncrysol.2018.12.033.10.1016/j.jnoncrysol.2018.12.033 ↗
75. Singh GVPB, Subrahmanyam C, Subramaniam KVL. Dissolution of the glassy phase in low-calcium fly ash during alkaline activation. Adv Cem Res. 2018;30:313–22. https://doi.org/10.1680/jadcr.17.00170.10.1680/jadcr.17.00170 ↗
76. Kumar S, Kumar R. Mechanical activation of fly ash: effect on reaction, structure and properties of resulting geopolymer. Ceram Int. 2011;37:533–41. https://doi.org/10.1016/J.CERAMINT.2010.09.038.10.1016/J.CERAMINT.2010.09.038 ↗
77. Ojha A, Aggarwal P. Development of mix design guidelines for low calcium fly ash-based geopolymer concrete—a quantitative approach. SILICON. 2023;15:3681–94. https://doi.org/10.1007/s12633-023-02299-5.10.1007/s12633-023-02299-5 ↗
78. IS:17452-2020. Use of alkali activated concrete for precast products-guidelines. Bur. Indian Stand, New Delhi. 2020.
79. Djwantoro Hardjito Dody SEW, Sumajouw MJ, Vijaya Rangan B. On the development of fly ash-based geopolymer concrete. ACI Mater J. 2004. https://doi.org/10.14359/13485.10.14359/13485 ↗
80. Ferdous W, Manalo A, Khennane A, Kayali O. Geopolymer concrete-filled pultruded composite beams—concrete mix design and application. Cem Concr Compos. 2015;58:1–13. https://doi.org/10.1016/J.CEMCONCOMP.2014.12.012.10.1016/J.CEMCONCOMP.2014.12.012 ↗
81. Pavithra P, Srinivasula Reddy M, Dinakar P, Hanumantha Rao B, Satpathy BK, Mohanty AN. A mix design procedure for geopolymer concrete with fly ash. J Clean Prod. 2016;133:117–25. https://doi.org/10.1016/J.JCLEPRO.2016.05.041.10.1016/J.JCLEPRO.2016.05.041 ↗
82. Lloyd NA, Rangan BV. Geopolymer concrete with fly ash. 2nd Int Conf Sustain Constr Mater Technol. 2010;7:1493–504.
83. Ramachandran A, Venkataraman S, Venkatasubramani R, Rangan B. Modified guidelines for geopolymer concrete mix design using Indian standard. Asian J Civ Eng. 2012;13:353–64.
84. Aliabdo A, Abd Elmoaty AE, Salem H. Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance. Constr Build Mater. 2016;121:694–703. https://doi.org/10.1016/j.conbuildmat.2016.06.062.10.1016/j.conbuildmat.2016.06.062 ↗
85. Ghafoor MT, Khan QS, Qazi AU, Sheikh MN, Hadi MNS. Influence of alkaline activators on the mechanical properties of fly ash based geopolymer concrete cured at ambient temperature. Constr Build Mater. 2021;273: 121752. https://doi.org/10.1016/j.conbuildmat.2020.121752.10.1016/j.conbuildmat.2020.121752 ↗
86. Hassan A, Arif M, Shariq M. Effect of curing condition on the mechanical properties of fly ash-based geopolymer concrete. SN Appl Sci. 2019;1:1694. https://doi.org/10.1007/s42452-019-1774-8.10.1007/s42452-019-1774-8 ↗
87. Hardjito D, Rangan BV. Development and properties of low-calcium fly ash-based geopolymer concrete, 2005. http://www.geopolymer.org/fichiers_pdf/curtin-flyash-GP-concrete-report.pdf.10.1080/13287982.2005.11464946 ↗
88. Ferdous MW, Kayali O, Khennane A. A detailed procedure of mix design for fly ash based geopolymer concrete. In: Proc. 4th Asia-Pacific Conf. FRP Struct. APFIS 2013. 2013. 11–13.
89. Adam AA. Horianto, the effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar. Procedia Eng. 2014;95:410–4. https://doi.org/10.1016/j.proeng.2014.12.199.10.1016/j.proeng.2014.12.199 ↗
90. Oh K, Yi H, Kou R, Qiao Y. Compaction self-assembly of a low-binder-content geopolymer material. J Mater Sci. 2020;55:15397–404. https://doi.org/10.1007/s10853-020-05069-5.10.1007/s10853-020-05069-5 ↗
91. Ranjbar N, Behnia A, Chai HK, Alengaram J, Jumaat MZ. Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. Constr Build Mater. 2016;127:274–83. https://doi.org/10.1016/j.conbuildmat.2016.09.144.10.1016/j.conbuildmat.2016.09.144 ↗
92. Alanazi H, Yang M, Zhang D, Gao Z. Bond strength of PCC pavement repairs using metakaolin-based geopolymer mortar. Cem Concr Compos. 2016;65:75–82. https://doi.org/10.1016/j.cemconcomp.2015.10.009.10.1016/j.cemconcomp.2015.10.009 ↗
93. Arnoult M, Perronnet M, Autef A, Rossignol S. How to control the geopolymer setting time with the alkaline silicate solution. J Non Cryst Solids. 2018;495:59–66. https://doi.org/10.1016/j.jnoncrysol.2018.02.036.10.1016/j.jnoncrysol.2018.02.036 ↗
94. Nath SK, Kumar S. Role of alkali concentration on reaction kinetics of fly ash geopolymerization. J Non Cryst Solids. 2019;505:241–51. https://doi.org/10.1016/j.jnoncrysol.2018.11.007.10.1016/j.jnoncrysol.2018.11.007 ↗
95. Sajan P, Jiang T, Lau CK, Tan G, Ng K. Combined effect of curing temperature, curing period and alkaline concentration on the mechanical properties of fly ash-based geopolymer. Clean Mater. 2021;1: 100002. https://doi.org/10.1016/j.clema.2021.100002.10.1016/j.clema.2021.100002 ↗
96. Torres-Carrasco M, Puertas F. Waste glass in the geopolymer preparation, mechanical and microstructural characterisation. J Clean Prod. 2015;90:397–408. https://doi.org/10.1016/j.jclepro.2014.11.074.10.1016/j.jclepro.2014.11.074 ↗
97. Azzahran Abdullah SF, Yun-Ming L, Al Bakri MM, Cheng-Yong H, Zulkifly K, Hussin K. Effect of alkali concentration on fly ash geopolymers. IOP Conf Ser Mater Sci Eng. 2018;343:012013. https://doi.org/10.1088/1757-899X/343/1/012013.10.1088/1757-899X/343/1/012013 ↗
98. Rai B, Roy LB, Rajjak M. A statistical investigation of different parameters influencing compressive strength of fly ash induced geopolymer concrete. Struct Concr. 2018;19:1268–79. https://doi.org/10.1002/SUCO.201700193.10.1002/SUCO.201700193 ↗
99. Naghizadeh A, Ekolu SO. Effect of mix parameters on strength of geopolymer mortars-experimental study. 6th Int Conf Durab Concr Struct ICDCS. 2018;2018:315–9.
100. Waqas R, Butt F, Zhu X, Jiang T, Tufail R. A comprehensive study on the factors affecting the workability and mechanical properties of ambient cured fly ash and slag based geopolymer concrete. Appl Sci. 2021;11:8722. https://doi.org/10.3390/app11188722.10.3390/app11188722 ↗