Cyclic response and shear mechanisms of RC short walls strengthened with engineered cementitious composites thin layers
Source abstract
Abstract
This paper investigates the effectiveness of engineering cementitious composites (ECC) thin layers for seismic strengthening of reinforced concrete (RC) short walls with high axial load ratios. Three RC short walls with an aspect ratio of 1.1 were tested under cyclic loading: one control wall and two ECC strengthened walls, adopting two different strengthening layer schemes. The results showed that the failure mode, damage tolerance, lateral stiffness, shear strength, and energy dissipation of the strengthened walls were improved to certain extents. The mesh grid ECC layer was proved an effective and applicable technique, the shear strength and energy dissipation of the corresponding strengthened wall were improved by 37.2% and 33.5%, respectively, and the addition of mesh grid and tie bars in the ECC layer prevented the debonding failure at the ECC/concrete interface. Besides, the shear resistance mechanisms of the test specimens were idealized by the strut-and-tie model, the contribution of cracked ECC tensile strength to shear was considered in the horizontal and vertical mechanisms. The predicted shear strengths of the RC walls agreed well with the test values.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Oh YH, Han SW, Lee LH. Effect of boundary element details on the seismic deformation capacity of structural walls. Earthq Eng Struct D. 2002;31(8):1583–602.10.1002/eqe.177 ↗
2. Brun M, Reynouard JM, Jezequel L, Ile N. Damaging potential of low-magnitude near-fifield earthquakes on low-rise shear walls. Soil Dyn Earthq Eng. 2004;24(8):587–603.10.1016/j.soildyn.2004.03.004 ↗
3. Fintel M. Performance of buildings with shear walls in earthquakes of the last thirty years. PCI J. 2002;40:62–80.10.15554/pcij.05011995.62.80 ↗
4. Altin S, Kopraman Y, Baran M. Strengthening of RC walls using externally bonding of steel strips. Eng Struct. 2013;49:686–95.10.1016/j.engstruct.2012.12.022 ↗
5. Antoniades KK, Salonikios TN, Kappos AJ. Tests on seismically damaged reinforced concrete walls repaired and strengthened using fiber-reinforced polymers. J Compos Constr. 2005;9(3):236–46.10.1061/(ASCE)1090-0268(2005)9:3(236) ↗
6. Li B, Qian K, Tran C. Retrofitting earthquake-damaged RC structural walls with openings by externally bonded FRP strips and sheets. J Compos Constr. 2013;17(2):259–70.10.1061/(ASCE)CC.1943-5614.0000336 ↗
7. Qazi S, Michel L, Ferrier E. Impact of CFRP partial bonding on the behaviour of short reinforced concrete wall under monotonic lateral loading. Compos Struct. 2015;128:251–9.10.1016/j.compstruct.2015.03.051 ↗
8. Shen D, Yang Q, Jiao Y, et al. Experimental investigations on reinforced concrete shear walls strengthened with basalt fiber-reinforced polymers under cyclic load. Constr Build Mater. 2017;136:217–29.10.1016/j.conbuildmat.2016.12.102 ↗
9. Qazi S, Michel L, Ferrier E. Seismic behaviour of RC short shear wall strengthened with externally bonded CFRP strips. Compos Struct. 2019;211:390–400.10.1016/j.compstruct.2018.12.038 ↗
10. Borjalilou V, Taati E, Ahmadian MT. Bending, buckling and free vibration of nonlocal FG-carbon nanotube-reinforced composite nanobeams: exact solutions. SN Appl Sci. 2019;1:1–15.10.1007/s42452-019-1359-6 ↗
11. Taati E, Borjalilou V, Fallah F, et al. On size-dependent nonlinear free vibration of carbon nanotube-reinforced beams based on the nonlocal elasticity theory: perturbation technique. Mech Based Des Struct. 2022;50(6):2124–46.10.1080/15397734.2020.1772087 ↗
12. Nagib MT, Sakr MA, El-khoriby SR, Khalifa TM. Cyclic behaviour of squat reinforced concrete shear walls strengthened with ultra-high performance fiber reinforced concrete. Eng Struct. 2021;246: 112999.10.1016/j.engstruct.2021.112999 ↗
13. Franssen R, Courard L, Mihaylov BI. Shear behavior of concrete walls retrofitted with ultra-high-performance fiber-reinforced concrete jackets. ACI Struct J. 2021;118(5):149–60.
14. Zhang Y, Yu J, Lu Z, Zhang R. Experimental test on aseismic behavior of damaged reinforced concrete shear wall repaired with ECC. Eng Mech. 2015;32(01):72–80.10.3901/JME.2016.01.072 ↗
15. Gulec CK, Whittaker AS. Empirical equations for peak shear strength of low aspect ratio reinforced concrete walls. ACI Struct J. 2011;108(1):80–9.
16. Pan B, Liu F, Zhuge Y, Zeng J, Liao J. ECCs/UHPFRCCs with and without FRP reinforcement for structural strengthening/repairing: a state-of-the-art review. Constr Build Mater. 2022;316: 125824.10.1016/j.conbuildmat.2021.125824 ↗
17. Hung CC, Chen YS. Innovative ECC jacketing for retrofitting shear-deficient RC members. Constr Buildi Mater. 2016;111:408–18.10.1016/j.conbuildmat.2016.02.077 ↗
18. Zheng A, Li S, Zhang D, Yan Y. Shear strengthening of RC beams with corrosion-damaged stirrups using FRP grid-reinforced ECC matrix composites. Compos Struct. 2021;272: 114229.10.1016/j.compstruct.2021.114229 ↗
19. Deng M, Zhang Y, Li Q. Shear strengthening of RC short columns with ECC jacket: Cyclic behavior tests. Eng Struct. 2018;160:535–45.10.1016/j.engstruct.2018.01.061 ↗
20. Hwang SJ, Fang WH, Lee HJ, Yu HW. Analytical model for predicting shear strength of squat walls. J Struct Eng ASCE. 2001;127(1):43–50.10.1061/(ASCE)0733-9445(2001)127:1(43) ↗
21. GB 50010-2010. Code for design of concrete structures. Ministry of Housing and Urban-Rural Development of China, Beijing, China; 2010.
22. GB 50011-2010. Code for seismic design buildings. Ministry of Housing and Urban-Rural Development of China, Beijing, China; 2010.
23. JGJ 3-2010. Technical specification for concrete structures of tall buildings. Ministry of Housing and Urban-Rural Development of China, Beijing, China; 2010.
24. GB/T 50107-2010. Standard for evaluation of concrete compressive strength. Ministry of Housing and Urban-Rural Development of China, Beijing, China; 2010.
25. JGJ/T 101–2015, Specification for seismic test of buildings. Ministry of housing and urban-rural development of China, Beijing, China; 2015.
26. Zhang Y, Yang J, Li T, Deng M. Mechanical behavior of RC columns strengthened with thin UHPC jacket under cyclic loads. J Build Eng. 2022;49: 104065.10.1016/j.jobe.2022.104065 ↗
27. Zhang Y, Deng M. Shear tests of engineered cementitious composites: mechanical behavior and toughness evaluation. Struct Concr. 2021;22(4):2482–92.10.1002/suco.202100077 ↗
28. Zhou J, Pan J, Leung CKY. Mechanical behavior of fiber-reinforced engineered cementitious composites in uniaxial compression. J Mater Civil Eng. 2015;27(1):04014111.10.1061/(ASCE)MT.1943-5533.0001034 ↗
29. Hwang SJ, Lee HJ. Strength prediction for discontinuity regions by softened strut-and-tie model. J Struct Eng. 2002;128(12):1519–26.10.1061/(ASCE)0733-9445(2002)128:12(1519) ↗
30. Kassem W. Shear strength of squat walls: a strut-and-tie model and closed-form design formula. Eng Struct. 2015;84:430–8.10.1016/j.engstruct.2014.11.027 ↗
31. ACI 318-19. Building code requirements for structural concrete (ACI 318-19) and commentary. Farmington Hills (MI): American Concrete Institute; 2019.
32. ASCE/SEI 43-05. Seismic design criteria for structures, systems, and components in nuclear facilities (ASCE/SEI 43-05). ASCE, Reston, VA; 2005.
33. Qazi S, Michel L, Ferrier E, Limam A. Strut-and-tie model for a reinforced concrete wall strengthened with carbon fibre-reinforced polymers. Compos Struct. 2015;128:87–99.10.1016/j.compstruct.2015.03.024 ↗