Optimization of cementitious mixes through response surface method: a systematic review
Source abstract
Abstract
Abstract The pursuit of cement-based materials with enhanced mechanical performance in the construction industry involves formulating numerous mixtures with varied contents of raw materials. However, the scarcity or contamination of these materials demands optimization methods to minimize the number of trials required. Response Surface Methodology (RSM) is a statistical experimental optimization method with which relations between sets of factors and responses can be established. This systematic review aims to analyze the existing literature on RSM models developed to achieve optimum levels in cementitious mixes. Over 100 papers were analyzed in accordance with the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) format. A comprehensive review of the RSM analyses in those studies and their effectiveness is conducted, through the evaluation of their optimized factors and responses, the selection of their design models, their use of ANalysis Of VAriance (ANOVA), and the determination of their coefficients of determination (R 2). Factors such as water/cement ratio and binder content prevailed in most models, the predominant responses of which were, respectively, compressive strength and workability. Although the use of ANOVA is commonly used to demonstrate the validity of the models, the studies replicating the mix with optimal levels of all factors are necessary to validate the results. On the basis of this review and depending on the responses that need to be maximized or minimized, the application of RSM can clearly be very crucial when quantifying the effects of new raw materials, whether recovered waste or natural resources, on mix behaviour.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Liu B, Qin J, Shi J, Jiang J, Wu X, He Z. New perspectives on utilization of CO2 sequestration technologies in cement-based materials. Constr Build Mater. 2021;272: 121660. https://doi.org/10.1016/J.CONBUILDMAT.2020.121660.10.1016/J.CONBUILDMAT.2020.121660 ↗
2. Global Status Report For Buildings and Construction, Towards a zero-emissions, efficient and resilient buildings and construction sector, 2022. https://globalabc.org/our-work/tracking-progress-global-status-report.
3. Global Cement and Concrete Association (GCCA), 2020. The GCCA 2050 Cement and Concrete Industry Roadmap for Net Zero, n.d., n.d.
4. Gheorghe M, Saca N, Radu L, Mazilu C. Mineral wastes used in advanced composite materials for low level waste immobilisation. In: International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM 2015: pp. 169–176.10.5593/SGEM2015/B62/S26.023 ↗
5. Sabireen F, Butt A, Ahmad K, Ullah O, Zaid HA, Shah TK. Mechanical performance of fiber-reinforced concrete and functionally graded concrete with natural and recycled aggregates. Ain Shams Eng J. 2023;14: 102121. https://doi.org/10.1016/j.asej.2023.102121.10.1016/j.asej.2023.102121 ↗
6. Parvizi M, Noël M, Vasquez J, Rios A, González M. Assessing the bond strength of glass fiber reinforced polymer (GFRP) bars in Portland Cement Concrete fabricated with seawater through pullout tests. Constr Build Mater. 2020;263: 120952. https://doi.org/10.1016/J.CONBUILDMAT.2020.120952.10.1016/J.CONBUILDMAT.2020.120952 ↗
7. Juenger MCG, Siddique R. Recent advances in understanding the role of supplementary cementitious materials in concrete. Cem Concr Res. 2015;78:71–80. https://doi.org/10.1016/J.CEMCONRES.2015.03.018.10.1016/J.CEMCONRES.2015.03.018 ↗
8. Tošić N, Marinković S, Dašić T, Stanić M. Multicriteria optimization of natural and recycled aggregate concrete for structural use. J Clean Prod. 2015;87:766–76. https://doi.org/10.1016/J.JCLEPRO.2014.10.070.10.1016/J.JCLEPRO.2014.10.070 ↗
9. Mohanta NR, Murmu M. Alternative coarse aggregate for sustainable and eco-friendly concrete—a review. J Build Eng. 2022;59: 105079. https://doi.org/10.1016/j.jobe.2022.105079.10.1016/j.jobe.2022.105079 ↗
10. Aldahdooh MAA, Jamrah A, Alnuaimi A, Martini MI, Ahmed MSR, Ahmed ASR. Influence of various plastics-waste aggregates on properties of normal concrete. J Build Eng. 2018;17:13–22. https://doi.org/10.1016/J.JOBE.2018.01.014.10.1016/J.JOBE.2018.01.014 ↗
11. Awolusi TF, Oke OL, Akinkurolere OO, Sojobi AO. Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fibre extracted from waste tires with limestone powder as filler. Case Studies in Construction Materials. 2019;10: e00212. https://doi.org/10.1016/J.CSCM.2018.E00212.10.1016/J.CSCM.2018.E00212 ↗
12. Mohammed MK, Al-Hadithi AI, Mohammed MH. Production and optimization of eco-efficient self compacting concrete SCC with limestone and PET. Constr Build Mater. 2019;197:734–46. https://doi.org/10.1016/j.conbuildmat.2018.11.189.10.1016/j.conbuildmat.2018.11.189 ↗
13. Rezaifar O, Hasanzadeh M, Gholhaki M. Concrete made with hybrid blends of crumb rubber and metakaolin: optimization using response surface method. Constr Build Mater. 2016;123:59–68. https://doi.org/10.1016/J.CONBUILDMAT.2016.06.047.10.1016/J.CONBUILDMAT.2016.06.047 ↗
14. Li Z, Lu D, Gao X. Optimization of mixture proportions by statistical experimental design using response surface method—a review. J Build Eng. 2021;36: 102101. https://doi.org/10.1016/j.jobe.2020.102101.10.1016/j.jobe.2020.102101 ↗
15. Karimifard S, Alavi Moghaddam MR. Application of response surface methodology in physicochemical removal of dyes from wastewater: a critical review. Sci Total Environ. 2018;640:772–97. https://doi.org/10.1016/j.scitotenv.2018.05.355.10.1016/j.scitotenv.2018.05.355 ↗
16. Hamada HM, Al-Attar A, Shi J, Yahaya F, Al Jawahery MS, Yousif ST. Optimization of sustainable concrete characteristics incorporating palm oil clinker and nano-palm oil fuel ash using response surface methodology. Powder Technol. 2023;413: 118054. https://doi.org/10.1016/j.powtec.2022.118054.10.1016/j.powtec.2022.118054 ↗
17. Venkatesan M, Zaib Q, Shah IH, Park HS. Optimum utilization of waste foundry sand and fly ash for geopolymer concrete synthesis using D-optimal mixture design of experiments. Resour Conserv Recycl. 2019;148:114–23. https://doi.org/10.1016/j.resconrec.2019.05.008.10.1016/j.resconrec.2019.05.008 ↗
18. Kursuncu B, Gencel O, Bayraktar OY, Shi J, Nematzadeh M, Kaplan G. Optimization of foam concrete characteristics using response surface methodology and artificial neural networks. Constr Build Mater. 2022;337: 127575. https://doi.org/10.1016/J.CONBUILDMAT.2022.127575.10.1016/J.CONBUILDMAT.2022.127575 ↗
19. Ghafari E, Costa H, Júlio E. RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers. Constr Build Mater. 2014;66:375–83. https://doi.org/10.1016/j.conbuildmat.2014.05.064.10.1016/j.conbuildmat.2014.05.064 ↗
20. Mohammed BS, Khed VC, Nuruddin MF. Rubbercrete mixture optimization using response surface methodology. J Clean Prod. 2018;171:1605–21. https://doi.org/10.1016/j.jclepro.2017.10.102.10.1016/j.jclepro.2017.10.102 ↗
21. Muteki K, MacGregor JF, Ueda T. Mixture designs and models for the simultaneous selection of ingredients and their ratios. Chemometr Intell Lab Syst. 2007;86:17–25. https://doi.org/10.1016/j.chemolab.2006.08.003.10.1016/j.chemolab.2006.08.003 ↗
22. Eriksson L, Johansson E, Wikström C. Mixture design—design generation, PLS analysis, and model usage. Chemom Intell Lab Syst. 1998;43:1–24. https://doi.org/10.1016/S0169-7439(98)00126-9.10.1016/S0169-7439(98)00126-9 ↗
23. DeRousseau MA, Kasprzyk JR, Srubar WV. Computational design optimization of concrete mixtures: a review. Cement Concr Res. 2018;109:42–53. https://doi.org/10.1016/j.cemconres.2018.04.007.10.1016/j.cemconres.2018.04.007 ↗
24. Liberati A, Altman DG, Tetzlaff J, Mulrow C, Gøtzsche PC, Ioannidis JPA, Clarke M, Devereaux PJ, Kleijnen J, Moher D. The PRISMA statement for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions: explanation and elaboration. Ann Intern Med. 2009;151:65. https://doi.org/10.7326/0003-4819-151-4-200908180-00136.10.7326/0003-4819-151-4-200908180-00136 ↗
25. Page MJ, Moher D, Bossuyt PM, Boutron I, Hoffmann TC, Mulrow CD, Shamseer L, Tetzlaff JM, Akl EA, Brennan SE, Chou R, Glanville J, Grimshaw JM, Hróbjartsson A, Lalu MM, Li T, Loder EW, Mayo-Wilson E, Mcdonald S, Mcguinness LA, Stewart LA, Thomas J, Tricco AC, Welch VA, Whiting P, Mckenzie JE. PRISMA 2020 explanation and elaboration: updated guidance and exemplars for reporting systematic reviews. BMJ. 2021. https://doi.org/10.1136/bmj.n160.10.1136/bmj.n160 ↗
26. Bezerra MA, Santelli RE, Oliveira EP, Villar LS, Escaleira LA. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta. 2008;76:965–77. https://doi.org/10.1016/J.TALANTA.2008.05.019.10.1016/J.TALANTA.2008.05.019 ↗
27. Aziminezhad M, Mahdikhani M, Memarpour MM. RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological properties. Constr Build Mater. 2018;189:1200–13. https://doi.org/10.1016/j.conbuildmat.2018.09.019.10.1016/j.conbuildmat.2018.09.019 ↗
28. Asadzadeh S, Khoshbayan S. Multi-objective optimization of influential factors on production process of foamed concrete using Box-Behnken approach. Constr Build Mater. 2018;170:101–10. https://doi.org/10.1016/j.conbuildmat.2018.02.189.10.1016/j.conbuildmat.2018.02.189 ↗
29. Luo X, Xing G, Qiao L, Miao P, Yu X, Ma K. Multi-objective optimization of the mix proportion for dune sand concrete based on response surface methodology. Constr Build Mater. 2023;366: 129928. https://doi.org/10.1016/j.conbuildmat.2022.129928.10.1016/j.conbuildmat.2022.129928 ↗
30. Sakkas VA, Islam MA, Stalikas C, Albanis TA. Photocatalytic degradation using design of experiments: a review and example of the Congo red degradation. J Hazard Mater. 2010;175:33–44. https://doi.org/10.1016/J.JHAZMAT.2009.10.050.10.1016/J.JHAZMAT.2009.10.050 ↗
31. Khayat KH, Ghezal A, Hadriche MS. Factorial design model for proportioning self-consolidating concrete. Mater Struct. 1999;32:679–86. https://doi.org/10.1007/BF02481706.10.1007/BF02481706 ↗
32. Sun Y, Yu R, Shui Z, Wang X, Qian D, Rao B, Huang J, He Y. Understanding the porous aggregates carrier effect on reducing autogenous shrinkage of ultra-high performance concrete (UHPC) based on response surface method. Constr Build Mater. 2019;222:130–41. https://doi.org/10.1016/J.CONBUILDMAT.2019.06.151.10.1016/J.CONBUILDMAT.2019.06.151 ↗
33. Şimşek B, Iç YT, Şimşek EH, Güvenç AB. Development of a graphical user interface for determining the optimal mixture parameters of normal weight concretes: a response surface methodology based quadratic programming approach. Chemom Intell Lab Syst. 2014;136:1–9. https://doi.org/10.1016/j.chemolab.2014.05.001.10.1016/j.chemolab.2014.05.001 ↗
34. Muthukumar M, Mohan D, Rajendran M. Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments. Cement Concr Compos. 2003;25:751–8. https://doi.org/10.1016/S0958-9465(02)00116-6.10.1016/S0958-9465(02)00116-6 ↗
35. Bektas F, Bektas BA. Analyzing mix parameters in ASR concrete using response surface methodology. Constr Build Mater. 2014;66:299–305. https://doi.org/10.1016/J.CONBUILDMAT.2014.05.055.10.1016/J.CONBUILDMAT.2014.05.055 ↗
36. Jimma BE, Rangaraju PR. Chemical admixtures dose optimization in pervious concrete paste selection—a statistical approach. Constr Build Mater. 2015;101:1047–58. https://doi.org/10.1016/j.conbuildmat.2015.10.003.10.1016/j.conbuildmat.2015.10.003 ↗
37. Khayat KH, Ghezal A, Hadriche MS. Utility of statistical models in proportioning self-consolidating concrete. 2000. https://doi.org/10.1007/BF02479705.10.1007/BF02479705 ↗
38. Li N, Shi C, Zhang Z, Zhu D, Hwang HJ, Zhu Y, Sun T. A mixture proportioning method for the development of performance-based alkali-activated slag-based concrete. Cement Concr Compos. 2018;93:163–74. https://doi.org/10.1016/J.CEMCONCOMP.2018.07.009.10.1016/J.CEMCONCOMP.2018.07.009 ↗
39. Wu M, Zhang Y, Liu G, Wu Z, Yang Y, Sun W. Experimental study on the performance of lime-based low carbon cementitious materials. Constr Build Mater. 2018;168:780–93. https://doi.org/10.1016/j.conbuildmat.2018.02.156.10.1016/j.conbuildmat.2018.02.156 ↗
40. Bayramov F, Taşdemir C, Taşdemir MA. Optimisation of steel fibre reinforced concretes by means of statistical response surface method. Cement Concr Compos. 2004;26:665–75. https://doi.org/10.1016/S0958-9465(03)00161-6.10.1016/S0958-9465(03)00161-6 ↗
41. Sonebi M, Bassuoni MT. Investigating the effect of mixture design parameters on pervious concrete by statistical modelling. Constr Build Mater. 2013;38:147–54. https://doi.org/10.1016/j.conbuildmat.2012.07.044.10.1016/j.conbuildmat.2012.07.044 ↗
42. Ghezal AF, Khayat KH. Optimizing self-consolidating concrete with limestone filler by using statistical factorial design methods. 2002. https://doi.org/10.14359/1197210.14359/11972 ↗
43. Li F, Cai X, Zhang Y, Guo X, Jiang M. Mechanical and permeability analysis and optimization of recycled aggregate pervious concrete based on response surface method. J Renew Mater. 2023;11:1745–62. https://doi.org/10.32604/jrm.2022.024380.10.32604/jrm.2022.024380 ↗
44. Ahmad S, Alghamdi SA. A statistical approach to optimizing concrete mixture design. Sci World J. 2014;20:14. https://doi.org/10.1155/2014/561539.10.1155/2014/561539 ↗
45. Cho T. Prediction of cyclic freeze-thaw damage in concrete structures based on response surface method. Constr Build Mater. 2007;21:2031–40. https://doi.org/10.1016/j.conbuildmat.2007.04.018.10.1016/j.conbuildmat.2007.04.018 ↗
46. Xuan DX, Houben LJM, Molenaar AAA, Shui ZH. Mixture optimization of cement treated demolition waste with recycled masonry and concrete. Mater Struct/Mater Constr. 2012;45:143–51. https://doi.org/10.1617/s11527-011-9756-3.10.1617/s11527-011-9756-3 ↗
47. Cihan MT, Güner A, Yüzer N. Response surfaces for compressive strength of concrete. Constr Build Mater. 2013;40:763–74. https://doi.org/10.1016/J.CONBUILDMAT.2012.11.048.10.1016/J.CONBUILDMAT.2012.11.048 ↗
48. Habibi A, Ghomashi J. Development of an optimum mix design method for self-compacting concrete based on experimental results. Constr Build Mater. 2018;168:113–23. https://doi.org/10.1016/j.conbuildmat.2018.02.113.10.1016/j.conbuildmat.2018.02.113 ↗
49. Hammoudi A, Moussaceb K, Belebchouche C, Dahmoune F. Comparison of artificial neural network (ANN) and response surface methodology (RSM) prediction in compressive strength of recycled concrete aggregates. Constr Build Mater. 2019;209:425–36. https://doi.org/10.1016/j.conbuildmat.2019.03.119.10.1016/j.conbuildmat.2019.03.119 ↗
50. Zhang Q, Feng X, Chen X, Lu K. Mix design for recycled aggregate pervious concrete based on response surface methodology. Constr Build Mater. 2020;259: 119776. https://doi.org/10.1016/j.conbuildmat.2020.119776.10.1016/j.conbuildmat.2020.119776 ↗
51. Vasudevan S, Balachandran M. Influence of admixtures on properties of concrete and optimization using response surface methodology. Mater Today Proc. 2020;2:650–61. https://doi.org/10.1016/j.matpr.2020.04.319.10.1016/j.matpr.2020.04.319 ↗
52. Habibi A, Ramezanianpour AM, Mahdikhani M, Bamshad O. RSM-based evaluation of mechanical and durability properties of recycled aggregate concrete containing GGBFS and silica fume. Constr Build Mater. 2021;270: 121431. https://doi.org/10.1016/j.conbuildmat.2020.121431.10.1016/j.conbuildmat.2020.121431 ↗
53. Jiao D, Shi C, Yuan Q, An X, Liu Y. Mixture design of concrete using simplex centroid design method. Cement Concr Compos. 2018;89:76–88. https://doi.org/10.1016/J.CEMCONCOMP.2018.03.001.10.1016/J.CEMCONCOMP.2018.03.001 ↗
54. Güneyisi E, Gesoǧlu M, Algin Z, Mermerdaş K. Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method. Compos B Eng. 2014;60:707–15. https://doi.org/10.1016/j.compositesb.2014.01.017.10.1016/j.compositesb.2014.01.017 ↗
55. Alqadi ANS, Bin Mustapha KN, Naganathan S, Al-Kadi QNS. Uses of central composite design and surface response to evaluate the influence of constituent materials on fresh and hardened properties of self-compacting concrete. KSCE J Civ Eng. 2012;16:407–16. https://doi.org/10.1007/s12205-012-1308-z.10.1007/s12205-012-1308-z ↗
56. Nambiar EKK, Ramamurthy K. Models relating mixture composition to the density and strength of foam concrete using response surface methodology. Cement Concr Compos. 2006;28:752–60. https://doi.org/10.1016/j.cemconcomp.2006.06.001.10.1016/j.cemconcomp.2006.06.001 ↗
57. Li Q, Cai L, Fu Y, Wang H, Zou Y. Fracture properties and response surface methodology model of alkali-slag concrete under freeze–thaw cycles. Constr Build Mater. 2015;93:620–6. https://doi.org/10.1016/J.CONBUILDMAT.2015.06.037.10.1016/J.CONBUILDMAT.2015.06.037 ↗
58. Mohammed BS, Haruna S, Mubarak Abdul Wahab M, Liew MS. Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Constr Build Mater. 2019;225:776–87. https://doi.org/10.1016/j.conbuildmat.2019.07.267.10.1016/j.conbuildmat.2019.07.267 ↗
59. Zhenguo S, Caijun S, Rui Z, Dehui W, Fuqiang H. Factorial design method for designing ternary composite cements to mitigate ASR expansion. J Mater Civ Eng. 2016;28:04016064. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001568.10.1061/(ASCE)MT.1943-5533.0001568 ↗
60. Nehdi ML, Sumner A. Optimization of ternary cementitious mortar blends using factorial experimental plans. Mater Struct/Mater Constr. 2002;35:495–503. https://doi.org/10.1007/bf02483137.10.1007/bf02483137 ↗
61. Yeh IC. Optimization of concrete mix proportioning using a flattened simplex—centroid mixture design and neural networks. Eng Comput. 2009;25:179–90. https://doi.org/10.1007/s00366-008-0113-2.10.1007/s00366-008-0113-2 ↗
62. Li MC, Chen YS, Chan YW, Hoang VL. A study of statistical models application for mixture of high-flowing concrete. J Mar Sci Technol. 2012;20:325–35. https://doi.org/10.51400/2709-6998.1811.10.51400/2709-6998.1811 ↗
63. Srinivasa AS, Swaminathan K, Yaragal SC. Microstructural and optimization studies on novel one-part geopolymer pastes by Box–Behnken response surface design method. Case Stud Constr Mater. 2023;18: e01946. https://doi.org/10.1016/j.cscm.2023.e01946.10.1016/j.cscm.2023.e01946 ↗
64. Ferdosian I, Camões A. Eco-efficient ultra-high performance concrete development by means of response surface methodology. Cement Concr Compos. 2017;84:146–56. https://doi.org/10.1016/J.CEMCONCOMP.2017.08.019.10.1016/J.CEMCONCOMP.2017.08.019 ↗
65. Ghafari E, Costa H, Júlio E. Statistical mixture design approach for eco-efficient UHPC. Cem Concr Compos. 2015;55:17–25. https://doi.org/10.1016/j.cemconcomp.2014.07.016.10.1016/j.cemconcomp.2014.07.016 ↗
66. Azmi M, Johari M, Majid TA, Bunnori NM. Optimizing sustainable high performance green concrete characteristics with minimum cement content using response surface methodology 2023. https://doi.org/10.21203/rs.3.rs-3607080/v1.10.21203/rs.3.rs-3607080/v1 ↗
67. Alani AH, Johari MAM, Bunnori NM, Majid TA. Application of response surface methodology for optimizing the compressive strength of green ultra high strength concrete using silica fume. J Build Pathol Rehabil. 2024;9:5. https://doi.org/10.1007/s41024-023-00361-8.10.1007/s41024-023-00361-8 ↗
68. Sonebi M. Medium strength self-compacting concrete containing fly ash: modelling using factorial experimental plans. Cem Concr Res. 2004;34:1199–208. https://doi.org/10.1016/j.cemconres.2003.12.022.10.1016/j.cemconres.2003.12.022 ↗
69. Dashti J, Nematzadeh M. Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design. Constr Build Mater. 2020;253: 118999. https://doi.org/10.1016/j.conbuildmat.2020.118999.10.1016/j.conbuildmat.2020.118999 ↗
70. Zhang C, Yang J, Fu J, Wang S, Yin J. Optimal formulation design of polymer-modified cement based grouting material for loose deposits. Constr Build Mater. 2020;261: 120513. https://doi.org/10.1016/j.conbuildmat.2020.120513.10.1016/j.conbuildmat.2020.120513 ↗
71. Ahmad S, Bahraq AA, Shaqraa AA, Khalid HR, Al-Gadhib AH, Maslehuddin M. Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: an experimental and statistical study. Case Stud Constr Mater. 2022;16: e00915. https://doi.org/10.1016/j.cscm.2022.e00915.10.1016/j.cscm.2022.e00915 ↗
72. Li Z, Lu D, Gao X. Multi-objective optimization of gap-graded cement paste blended with supplementary cementitious materials using response surface methodology. Constr Build Mater. 2020;248: 118552. https://doi.org/10.1016/j.conbuildmat.2020.118552.10.1016/j.conbuildmat.2020.118552 ↗
73. Al Qadi ANS, Nasharuddin K, Mustapha B, Al-Mattarneh H, Al-Kadi QNS. Statistical models for hardened properties of self-compacting concrete. Am J Eng Appl Sci. 2009;2:764–70. https://doi.org/10.3844/ajeassp.2009.764.770.10.3844/ajeassp.2009.764.770 ↗
74. Kockal NU, Ozturan T. Optimization of properties of fly ash aggregates for high-strength lightweight concrete production. Mater Des. 2011;32:3586–93. https://doi.org/10.1016/j.matdes.2011.02.028.10.1016/j.matdes.2011.02.028 ↗
75. Long WJ, Lemieux G, Hwang SD, Khayat KH. Statistical models to predict fresh and hardened properties of self-consolidating concrete. Mater Struct/Mater Constr. 2012;45:1035–52. https://doi.org/10.1617/s11527-011-9815-9.10.1617/s11527-011-9815-9 ↗
76. Shahriar A, Nehdi ML. Optimization of rheological properties of oil well cement slurries using experimental design. Mater Struct/Materiaux et Constr. 2012;45:1403–23. https://doi.org/10.1617/s11527-012-9841-2.10.1617/s11527-012-9841-2 ↗
77. Aldahdooh MAA, Muhamad Bunnori N, Megat Johari MA. Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method. Mater Des. 2013;52:957–65. https://doi.org/10.1016/J.MATDES.2013.06.034.10.1016/J.MATDES.2013.06.034 ↗
78. Aldahdooh MAA, Muhamad Bunnori N, Megat Johari MA. Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash. Constr Build Mater. 2013;48:379–89. https://doi.org/10.1016/j.conbuildmat.2013.07.007.10.1016/j.conbuildmat.2013.07.007 ↗
79. Aldahdooh MAA, Muhamad Bunnori N, Megat Johari MA. Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites. Mater Des. 2014;54:694–701. https://doi.org/10.1016/j.matdes.2013.08.094.10.1016/j.matdes.2013.08.094 ↗
80. Zaitri R, Bederina M, Bouziani T, Makhloufi Z, Hadjoudja M. Development of high performances concrete based on the addition of grinded dune sand and limestone rock using the mixture design modelling approach. Constr Build Mater. 2014;60:8–16. https://doi.org/10.1016/j.conbuildmat.2014.02.062.10.1016/j.conbuildmat.2014.02.062 ↗
81. Lotfy A, Hossain KMA, Lachemi M. Statistical models for the development of optimized furnace slag lightweight aggregate self-consolidating concrete. Cement Concr Compos. 2015;55:169–85. https://doi.org/10.1016/j.cemconcomp.2014.09.009.10.1016/j.cemconcomp.2014.09.009 ↗
82. Abouhussien AA, Hassan AAA. Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis. Constr Build Mater. 2015;76:297–306. https://doi.org/10.1016/j.conbuildmat.2014.12.010.10.1016/j.conbuildmat.2014.12.010 ↗
83. Soto-Pérez L, López V, Hwang SS. Response surface methodology to optimize the cement paste mix design: time-dependent contribution of fly ash and nano-iron oxide as admixtures. Mater Des. 2015;86:22–9. https://doi.org/10.1016/j.matdes.2015.07.049.10.1016/j.matdes.2015.07.049 ↗
84. Mosabepranah MA, Eren O. Statistical flexural toughness modeling of ultra high performance concrete using response surface method. Comput Concr. 2016;17:477–88. https://doi.org/10.12989/cac.2016.17.4.477.10.12989/cac.2016.17.4.477 ↗
85. Hameed MFA, Ghazy MF, Abd Elaty MAA. Cement mortar with nanosilica: experiments with mixture design method. ACI Mater J. 2016;113:43–53. https://doi.org/10.14359/51688632.10.14359/51688632 ↗
86. Khan A, Dof J, Kim D. Cost effective optimal mix proportioning of high strength self compacting concrete using response surface methodology. Comput Concr. 2016;17:629–48. https://doi.org/10.12989/cac.2016.17.5.629.10.12989/cac.2016.17.5.629 ↗
87. Mermerdaş K, Algın Z, Oleiwi SM, Nassani DE. Optimization of lightweight GGBFS and FA geopolymer mortars by response surface method. Constr Build Mater. 2017;139:159–71. https://doi.org/10.1016/j.conbuildmat.2017.02.050.10.1016/j.conbuildmat.2017.02.050 ↗
88. Soliman NA, Tagnit-Hamou A. Using particle packing and statistical approach to optimize eco-efficient ultra-high-performance concrete. ACI Mater J. 2017;114:847–58. https://doi.org/10.14359/51701001.10.14359/51701001 ↗
89. Mtarfi NH, Rais Z, Taleb M, Kada KM. Effect of fly ash and grading agent on the properties of mortar using response surface methodology. J Build Eng. 2017;9:109–16. https://doi.org/10.1016/j.jobe.2016.12.004.10.1016/j.jobe.2016.12.004 ↗
90. Zahid M, Shafiq N, Isa MH, Gil L. Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. J Clean Prod. 2018;194:483–98. https://doi.org/10.1016/j.jclepro.2018.05.158.10.1016/j.jclepro.2018.05.158 ↗
91. Revathi T, Jeyalakshmi R, Rajamane NP. Geopolymeric binder: the effect of silica fume addition on fly activation by using response surface methodology. Mater Today Proc. 2018;5:8727–34. https://doi.org/10.1016/J.MATPR.2017.12.299.10.1016/J.MATPR.2017.12.299 ↗
92. Shamsuddoha M, Hüsken G, Schmidt W, Kühne HC, Baeßler M. Ternary mix design of grout material for structural repair using statistical tools. Constr Build Mater. 2018;189:170–80. https://doi.org/10.1016/j.conbuildmat.2018.08.156.10.1016/j.conbuildmat.2018.08.156 ↗
93. Selvaraj S, Sivaraman S. Prediction model for optimized self-compacting concrete with fly ash using response surface method based on fuzzy classification. Neural Comput Appl. 2019;31:1365–73. https://doi.org/10.1007/s00521-018-3575-1.10.1007/s00521-018-3575-1 ↗
94. Ragalwar K, Heard WF, Williams BA, Ranade R. Significance of the particle size distribution modulus for strain-hardening-ultra-high performance concrete (SH-UHPC) matrix design. Constr Build Mater. 2020;234: 117423. https://doi.org/10.1016/J.CONBUILDMAT.2019.117423.10.1016/J.CONBUILDMAT.2019.117423 ↗
95. Yan C, Zhao H, Zhang J, Liu S, Yang Z. The cementitious composites using calcium silicate slag as partial cement. J Clean Prod. 2020;256: 120514. https://doi.org/10.1016/j.jclepro.2020.120514.10.1016/j.jclepro.2020.120514 ↗
96. Mermerdaş K, Algın Z. Ekmen, Experimental assessment and optimization of mix parameters of fly ash-based lightweight geopolymer mortar with respect to shrinkage and strength. J Build Eng. 2020;31: 101351. https://doi.org/10.1016/j.jobe.2020.101351.10.1016/j.jobe.2020.101351 ↗
97. Fauzi MA, Arshad MF, Nor NM, Ghazali E. Sustainable controlled low-strength material: plastic properties and strength optimization. Comput Concr. 2022;30:393–407. https://doi.org/10.12989/cac.2022.30.6.393.10.12989/cac.2022.30.6.393 ↗
98. Guo J, Hu S, Zhao X, Tao X, Nie Y. Compressive strength performance of additives for cement-based grouting material with low water-binder ratio by response surface methodology. In: Lecture notes in civil engineering. Springer Science and Business Media Deutschland GmbH, 2022: 368–379. https://doi.org/10.1007/978-981-19-1260-3_34.10.1007/978-981-19-1260-3_34 ↗
99. Menezes RR, Neto HGM, Santana LNL, Lira HL, Ferreira HS, Neves GA. Optimization of wastes content in ceramic tiles using statistical design of mixture experiments. J Eur Ceram Soc. 2008;28:3027–39. https://doi.org/10.1016/j.jeurceramsoc.2008.05.007.10.1016/j.jeurceramsoc.2008.05.007 ↗
100. Minh NV, Nguyen VM, Anh NV. Optimization of the engineering properties of cement concrete containing gravel and waste rock using dense packing and response surface methodology. Period Polytech Civ Eng. 2023;67:1246–63. https://doi.org/10.3311/PPci.21908.10.3311/PPci.21908 ↗