article·2019-01-03

Study on constitutive model and deformation mechanism in high speed cutting Inconel718

Zhaopeng Hao, JiNing Li, YiHang Fan, Fangfang Ji

Publisher page

Abstract

The nickel-based alloy Inconel718 is a multi-component complex alloy. There exists complex cutting deformation, higher cutting temperature, higher cutting force and formation of serrated chip in the machining process. However, the formation time of every saw tooth unit in serrated chip is very short. It is difficult to use traditional method to analyze the chip at any time. Simulation analysis, integrated with the experimental results, was used to study the whole process of cutting deformation. The Johnson—Cook (JC) constitutive model of Inconel718 under high speed and high strain rate is established through split Hopkinson pressure bar (SHPB) test. The finite element method was used to study the deformation process. Combining the analysis of metallographic pictures which were obtained in the cutting experiment, the plastic behavior evolution of material in the cutting zone is deeply studied to further reveal the forming mechanism of serrated chip. The results showed that the local temperature in the cutting zone increased rapidly. The appearance of thermal softening of materials led to the change of stress distribution in the cutting zone. The thermoplastic shear instability further appeared which resulted in the shear localization, subsequently leading to the uneven deformation of chip and then serrated chip formed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.