journal article·2019-12

Localized failure analysis of internally pressurized laminated ellipsoidal woven GFRP composite domes: Analytical, numerical, and experimental studies

Scott Gohery, Shokrollah Sharifi, Colin Burvill, Saeed Mouloodi, Mohammadreza Izadifar, Peter Thissen

Publisher page

Abstract

Abstract This paper presented a systematic approach toward localized failure inspection of internally pressurized laminated ellipsoidal woven composite domes. The domes were made of thin glass fiber reinforced polymer (GFRP) woven composite layups [0,0,0], [0,30,0], [0,45,0], and [0,75,0]. The analytical results demonstrated that the circumferential regions near meridian φ = 45° in prolate ellipsoidal domes and near meridian φ = 90° in oblate ellipsoidal domes sustain the highest deformation under internal pressure. This observation was then confirmed by the numerical and experimental results. In addition, the numerical and experimental results showed localized rather than uniform failure in those regions, irrespective of changes in laminate stacking sequence. It was observed that localized failure occurs since the woven fibers configuration in some areas of woven remains in initial geometry (square shape), while the rests are deformed into the rhombic shape. In other words, by moving along the circumferential direction from the area close to θ = 0° to θ = 45° and θ = 45° to θ = 90°, the shape of woven fibers gradually changes from square (strong area) to rhombic (weak area), and rhombic to square, respectively. Thus, to minimize failure pressure, the meridian region vulnerable to failure must initially be identified. Afterwards, the rhombic regions in the circumference corresponding to that meridian must be strengthened.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Optical measurement and interference techniques · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. S. Gohery, S. Sharifi, Z. Vrcelj, M.Y. Yahya, First-ply failure prediction of an unsymmetrical laminated ellipsoidal woven GFRP composite shell with incorporated surface-bounded sensors and internally pressurized, Compos. Part B: Eng. 77 (2015) 502–518.10.1016/j.compositesb.2015.03.058 ↗
2. W. Beluch, T. Burczynski, Two-scale identification of composites’ material constants by means of computational intelligence methods, Arch. Civ. Mech. Eng. 14 (4) (2014) 636–646.10.1016/j.acme.2013.12.007 ↗
3. H.H. Tsang, S. Raza, Impact energy absorption of bio-inspired tubular sections with structural hierarchy, Compos. Struct. 195 (March) (2018) 199–210.10.1016/j.compstruct.2018.04.057 ↗
4. R. Rafiee, M.A. Torabi, Stochastic prediction of burst pressure in composite pressure vessels, Compos. Struct. 185 (2018) 573–583.10.1016/j.compstruct.2017.11.068 ↗
5. A. Vasanthanathan, P. Nagaraj, K.M. Kabilash, M. Sriram, The influence of stiffeners on axial crushing of glass-fabric-reinforced epoxy composite shells, J. King Saud. Univ. — Eng. Sci. 29 (1) (2017) 91–101.
6. W. Zhang, et al., A non-orthogonal material model of woven composites in the preforming process, CIRP Ann. — Manuf. Technol. 66 (1) (2017) 257–260.10.1016/j.cirp.2017.04.112 ↗
7. R. Udhayaraman, S.S. Mulay, Multi-scale approach based constitutive modelling of plain woven textile composites, Mech. Mater. 112 (2017) 172–192.10.1016/j.mechmat.2017.06.007 ↗
8. L. Wang, et al., Progressive failure analysis of 2D woven composites at the meso-micro scale, Compos. Struct. 178 (2017) 395–405.10.1016/j.compstruct.2017.07.023 ↗
9. M. Dziendzikowski, K. Dragan, A. Katunin, Localizing impact damage of composite structures with modified RAPID algorithm and non-circular PZT arrays, Arch. Civ. Mech. Eng. 17 (1) (2017) 178–187.10.1016/j.acme.2016.09.005 ↗
10. J. Chróscielewski, A. Sabik, B. Sobczyk, W. Witkowski, Nonlinear FEM 2D failure onset prediction of composite shells based on 6-parameter shell theory, Thin-Walled Struct. 105 (2016) 207–219.10.1016/j.tws.2016.03.024 ↗
11. E. Shahabi, M.R. Forouzan, A damage mechanics based failure criterion for fiber reinforced polymers, Compos. Sci. Technol. 140 (2017) 23–29.10.1016/j.compscitech.2016.12.023 ↗
12. W. Van Paepegem, J. Degrieck, Calculation of damage-dependent directional failure indices from the Tsai-Wu failure criterion, Compos. Sci. Technol. 63 (2) (2003) 305–310.10.1016/S0266-3538(02)00251-8 ↗
13. B. Okutan, R. Karakuzu, Failure strength of woven glass fiber-epoxy composites pinned joints, J. Compos. Mater. 37 (15 (August)) (2003) 1337–1350.
14. F.C.P. Joints, Failure Strength of Woven Glass 37 (15) (2003).
15. L. Ye, H.R. Daghyani, Characteristics of woven fibre fabric reinforced composites in forming process, Compos. Part A: Appl. Sci. Manuf. 28 (9–10) (1997) 869–874.10.1016/S1359-835X(97)00053-5 ↗
16. Y. Wang, X. Dai, K. Wei, X. Guo, Progressive failure behavior of composite flywheels stacked from annular plain profiling woven fabric for energy storage, Compos. Struct. 194 (December 2017) (2018) 377–387.10.1016/j.compstruct.2018.04.036 ↗
17. D. Mackenzie, D. Camilleri, R. Hamilton, Design by analysis of ductile failure and buckling in torispherical pressure vessel heads, Thin-Walled Struct. 46 (2008) 963–974.10.1016/j.tws.2008.01.033 ↗
18. J. Montesano, C.V. Singh, Predicting evolution of ply cracks in composite laminates subjected to biaxial loading, Compos. Part B: Eng. 75 (2015) 264–273.10.1016/j.compositesb.2015.01.039 ↗
19. R. Al-Masri, H.A. Rasheed, Buckling solutions of clamped-pinned anisotropic laminated composite columns under axial compression using bifurcation approach and finite elements, Thin-Walled Struct. 123 (2018) 206–213.10.1016/j.tws.2017.11.022 ↗
20. R.J. Vinson, Plate and Panel Structures of Isotropic, Composite and Piezoelectric Materials, Including Sandwich Construction, Solid Mechanics and its Applications, Springer, Netherlands, 2005.
21. S. Mouloodi, S. Mohebbi, J. Khojasteh, M. Salehi, Size-dependent static characteristics of multicrystalline nanoplates by considering surface effects, Int. J. Mech. Sci. 79 (2014) 162–167.10.1016/j.ijmecsci.2013.12.011 ↗
22. S. Mouloodi, J. Khojasteh, M. Salehi, S. Mohebbi, Size dependent free vibration analysis of multicrystalline nanoplates by considering surface effects as well as interface region, Int. J. Mech. Sci. 85 (2014) 160–167.10.1016/j.ijmecsci.2014.05.023 ↗
23. A. Zingoni, N. Enoma, N. Govender, Equatorial bending of an elliptic toroidal shell, Thin-Walled Struct. 96 (2015) 286–294.10.1016/j.tws.2015.08.017 ↗
24. S. Gohery, S. Sharifi, Z. Vrcelj, A novel explicit solution for twisting control of smart laminated cantilever composite plates/beams using inclined piezoelectric actuators, Compos. Struct. 161 (2016) 477–504.10.1016/j.compstruct.2016.11.063 ↗
25. S. Gohery, S. Sharifi, Z. Vrcelj, New explicit solution for static shape control of smart laminated cantilever piezo-composite-hybrid plates/beams under thermo-electro-mechanical loads using piezoelectric actuators, Compos. Struct. 145 (2016) 89–112.10.1016/j.compstruct.2016.02.047 ↗
26. H. Hu, W. Lin, F. Tu, Failure analysis of fiber-reinforced composite laminates subjected to biaxial loads, Composites Part B 83 (2015) 153–165.10.1016/j.compositesb.2015.08.045 ↗
27. V. Xi, Stability analysis of multilayered composite shells with cut-outs, Arch. Civ. Mech. Eng. 11 (1) (2011) 195–207.10.1016/S1644-9665(12)60183-6 ↗
28. S. Sharifi, et al., Fracture of laminated woven GFRP composite pressure vessels under combined low-velocity impact and internal pressure, Arch. Civ. Mech. Eng. 18 (4) (2018) 1715–1728.10.1016/j.acme.2018.07.006 ↗
29. M.M. Alipour, An analytical approach for bending and stress analysis of cross/angle-ply laminated composite plates under arbitrary non-uniform loads and elastic foundations, Arch. Civ. Mech. Eng. 6 (2015).10.1016/j.acme.2015.11.001 ↗
30. J. Marcinowski, Optimal orientation of reinforcing fibers in a shell made of fibrous composites, Arch. Civ. Mech. Eng. 6 (1) (2006) 19–29.10.1016/S1644-9665(12)60074-0 ↗