journal article·2023-03-15

Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends

Bassiouny Saleh, Reham Fathi, Yinbao Tian, N. Radhika, Jinghua Jiang, Aibin Ma

Publisher page

Abstract

The advancement of the wire arc additive manufacturing (WAAM) process has been significant due to the cost-effectiveness in producing large metal components with high deposition rates. With the growth in the understanding of WAAM, researchers have found that the microstructure and mechanical properties of the fabricated components are greatly improved. As a result, a diverse range of materials have been linked to the process, leading to a wider application of WAAM in various industries. Thus, this review paper provides a comprehensive analysis of the recent advancements in WAAM, a technology that combines arc welding with additive manufacturing. The focus is on the microstructure, mechanical properties, materials used, process-related defects, and post-process treatments. The paper aims to offer guidance on producing high-quality and defect-free components by aligning the material characteristics with the capabilities of various WAAM techniques. The results of the paper highlight the strengths and limitations of WAAM and provide insights into its future prospects. This information is valuable for academics, designers, and manufacturers in the field, serving as a milestone for future WAAM research and application.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Yuan L, Pan Z, Polden J, Ding D, van Duin S, Li H. Integration of a multi-directional wire arc additive manufacturing system with an automated process planning algorithm. J Ind Inf Integr. 2022;26: 100265. https://doi.org/10.1016/j.jii.2021.100265.10.1016/j.jii.2021.100265 ↗
2. Kladovasilakis N, Charalampous P, Kostavelis I, Tzetzis D, Tzovaras D. Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review. Prog Addit Manuf. 2021;6:349–65. https://doi.org/10.1007/s40964-021-00180-8.10.1007/s40964-021-00180-8 ↗
3. Chen W, Cao H, Zhu L. Heterogeneous microstructure and anisotropic mechanical properties of reduced activation ferritic/martensitic steel fabricated by wire arc additive manufacturing. Nucl Mater Energy. 2022;33: 101261.
4. Li JLZ, Alkahari MR, Rosli NAB, Hasan R, Sudin MN, Ramli FR. Review of wire arc additive manufacturing for 3D metal printing. Int J Autom Technol. 2019;13:346–53. https://doi.org/10.20965/ijat.2019.p0346.10.20965/ijat.2019.p0346 ↗
5. Cho HW, Shin SJ, Seo GJ, Kim DB, Lee DH. Real-time anomaly detection using convolutional neural network in wire arc additive manufacturing: molybdenum material. J Mater Process Technol. 2022;302: 117495. https://doi.org/10.1016/j.jmatprotec.2022.117495.10.1016/j.jmatprotec.2022.117495 ↗
6. Sadasivam P, Amirthalingam M. Design and fabrication of micro-plasma transferred wire arc additive manufacturing system. CIRP J Manuf Sci Technol. 2022;37:185–95.10.1016/j.cirpj.2022.01.014 ↗
7. Müller J, Hensel J. WAAM of structural components—building strategies for varying wall thicknesses. Weld World. 2023. https://doi.org/10.1007/s40194-023-01481-y.10.1007/s40194-023-01481-y ↗
8. Guo Y, Quan G, Jiang Y, Ren L, Fan L, Pan H. Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding. J Magnes Alloy. 2021;9:192–201. https://doi.org/10.1016/j.jma.2020.01.003.10.1016/j.jma.2020.01.003 ↗
9. Wang X, Wang A. Finite element analysis of clamping form in wire and arc additive manufacturing. In: 2017 7th Int. Conf. Model. Simulation, Appl. Optim. ICMSAO 2017; 2017. p. 1–5. https://doi.org/10.1109/ICMSAO.2017.7934926.10.1109/ICMSAO.2017.7934926 ↗
10. Sujan GK, Wu B, Pan Z, Li H. In-situ fabrication of titanium iron intermetallic compound by the wire arc additive manufacturing process. Metall Mater Trans A Phys Metall Mater Sci. 2020;51:552–7. https://doi.org/10.1007/s11661-019-05555-9.10.1007/s11661-019-05555-9 ↗
11. Zhou Y, Lin X, Kang N, Wang Z, Tan H, Huang W. Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy. J Alloys Compd. 2021;865: 158949. https://doi.org/10.1016/j.jallcom.2021.158949.10.1016/j.jallcom.2021.158949 ↗
12. Dutkiewicz J, Rogal Ł, Kalita D, Kawałko J, Węglowski MS, Kwieciński K, Śliwiński P, Danielewski H, Antoszewski B, Cesari E. Microstructure, mechanical properties, and martensitic transformation in NiTi shape memory alloy fabricated using electron beam additive manufacturing technique. J Mater Eng Perform. 2022;31:1609–21. https://doi.org/10.1007/s11665-021-06241-x.10.1007/s11665-021-06241-x ↗
13. Ding D, Pan Z, Cuiuri D, Li H. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81:465–81. https://doi.org/10.1007/s00170-015-7077-3.10.1007/s00170-015-7077-3 ↗
14. WOS. Results for wire and arc additive manufacturing (Topic) (2023). https://www.webofscience.com/wos/alldb/citation-report/074f6617-7ed9-4182-998d-586dc66c9e52-6ec406f8 (Accessed Feb 5, 2023).
15. Bento JB, Lopez A, Pires I, Quintino L, Santos TG. Non-destructive testing for wire + arc additive manufacturing of aluminium parts. Addit Manuf. 2019;29: 100782. https://doi.org/10.1016/j.addma.2019.100782.10.1016/j.addma.2019.100782 ↗
16. Derekar KS. A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium. Mater Sci Technol (United Kingdom). 2018;34:895–916. https://doi.org/10.1080/02670836.2018.1455012.10.1080/02670836.2018.1455012 ↗
17. Omiyale BO, Olugbade TO, Abioye TE, Farayibi PK. Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: a review. Mater Sci Technol. 2022;38:391–408. https://doi.org/10.1080/02670836.2022.2045549.10.1080/02670836.2022.2045549 ↗
18. Cui X, Qi E, Sun Z, Jia C, Zeng Y, Wu S. Wire oscillating laser additive manufacturing of 2319 aluminum alloy: optimization of process parameters, microstructure, and mechanical properties. Chin J Mech Eng Addit Manuf Front. 2022;1:2022.
19. Xu J, Zhu J, Fan J, Zhou Q, Peng Y, Guo S. Microstructure and mechanical properties of Ti–6Al–4V alloy fabricated using electron beam freeform fabrication. Vacuum. 2019;167:364–73.10.1016/j.vacuum.2019.06.030 ↗
20. Karunakaran KP, Bernard A, Suryakumar S, Dembinski L, Taillandier G. Rapid manufacturing of metallic objects. Rapid Prototyp J. 2012;18:264–80. https://doi.org/10.1108/13552541211231644.10.1108/13552541211231644 ↗
21. Hejripour F, Valentine DT, Aidun DK. Study of mass transport in cold wire deposition for wire arc additive manufacturing. Int J Heat Mass Transf. 2018;125:471–84. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.092.10.1016/j.ijheatmasstransfer.2018.04.092 ↗
22. Abe T, Mori D, Sonoya K, Nakamura M, Sasahara H. Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing. Precis Eng. 2019;55:231–9. https://doi.org/10.1016/j.precisioneng.2018.09.010.10.1016/j.precisioneng.2018.09.010 ↗
23. Xue L, Xiao J, Nie Z, Hao F, Chen R, Liu C, Yu X, Tan C. Dynamic response of Ti–6.5Al–1Mo–1V–2Zr–0.1B alloy fabricated by wire arc additive manufacturing. Mater Sci Eng A. 2021;800: 140310. https://doi.org/10.1016/j.msea.2020.140310.10.1016/j.msea.2020.140310 ↗
24. Müller J, Hensel J, Dilger K. Mechanical properties of wire and arc additively manufactured high-strength steel structures. Weld World. 2022;66:395–407. https://doi.org/10.1007/s40194-021-01204-1.10.1007/s40194-021-01204-1 ↗
25. Xi N, Tang K, Fang X, Li Y, Duan Y, Huang K. Enhanced comprehensive properties of directed energy deposited Inconel 718 by a novel integrated deposition strategy. J Mater Sci Technol. 2023;141:42–55. https://doi.org/10.1016/j.jmst.2022.09.026.10.1016/j.jmst.2022.09.026 ↗
26. Huang J, Liu G, Yu X, Wu H, Huang Y, Yu S, Fan D. Microstructure regulation of titanium alloy functionally gradient materials fabricated by alternating current assisted wire arc additive manufacturing. Mater Des. 2022;218: 110731.10.1016/j.matdes.2022.110731 ↗
27. Hauser T, Reisch RT, Breese PP, Lutz BS, Pantano M, Nalam Y, Bela K, Kamps T, Volpp J, Kaplan AFH. Porosity in wire arc additive manufacturing of aluminium alloys. Addit Manuf. 2021;41: 101993. https://doi.org/10.1016/j.addma.2021.101993.10.1016/j.addma.2021.101993 ↗
28. Panin A, Martynov S, Kazachenok M, Kazantseva L, Bakulin A, Kulkova S, Perevalova O, Sklyarova E. Effects of water cooling on the microstructure of electron beam additive-manufactured Ti–6Al–4V. Metals (Basel). 2021;11:1–15. https://doi.org/10.3390/met11111742.10.3390/met11111742 ↗
29. Baufeld B, Van der Biest O, Gault R. Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: microstructure and mechanical properties. Mater Des. 2010;31:S106–11. https://doi.org/10.1016/j.matdes.2009.11.032.10.1016/j.matdes.2009.11.032 ↗
30. Wang J, Lin X, Li J, Hu Y, Zhou Y, Wang C, Li Q, Huang W. Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti–6Al–4V. Mater Sci Eng A. 2019;754:735–49. https://doi.org/10.1016/j.msea.2019.03.001.10.1016/j.msea.2019.03.001 ↗
31. Xiaolong C, Zulei L, Yanhua G, Zhonggang S, Yaoqi W, Lian Z. A study on the grain refinement mechanism of Ti–6Al–4V alloy produced by wire arc additive manufacturing using hydrogenation treatment processes. J Alloys Compd. 2022;890: 161634. https://doi.org/10.1016/j.jallcom.2021.161634.10.1016/j.jallcom.2021.161634 ↗
32. Panchenko O, Kurushkin D, Isupov F, Naumov A, Kladov I, Surenkova M. Gas metal arc welding modes in wire arc additive manufacturing of Ti–6Al–4V. Materials (Basel). 2021;14: 2457. https://doi.org/10.3390/ma14092457.10.3390/ma14092457 ↗
33. An F, Zhang B, Yan Y, Wang L. Effect of vanadium contents on microstructure and mechanical properties of Ti–6Al–xV components produced by wire + arc additive manufacturing. Mater Trans. 2021;62:1071–8. https://doi.org/10.2320/matertrans.MT-M2021031.10.2320/matertrans.MT-M2021031 ↗
34. Xian G, Mok Oh J, Lee J, Cho SM, Yeom J-T, Choi Y, Kang N. Effect of heat input on microstructure and mechanical property of wire-arc additive manufactured Ti–6Al–4V alloy. Weld World. 2022;66:847–61. https://doi.org/10.1007/s40194-021-01248-3.10.1007/s40194-021-01248-3 ↗
35. Liu K, Jiang X, Chen S, Yuan T, Yan Z. Effect of SiC addition on microstructure and properties of Al–Mg alloy fabricated by powder and wire cold metal transfer process. J Mater Res Technol. 2022;17:310–9. https://doi.org/10.1016/j.jmrt.2022.01.014.10.1016/j.jmrt.2022.01.014 ↗
36. Langelandsvik G, Akselsen OM, Furu T, Roven HJ. Review of aluminum alloy development for wire arc additive manufacturing. Materials (Basel). 2021;14:1–26. https://doi.org/10.3390/ma14185370.10.3390/ma14185370 ↗
37. Su C, Chen X, Gao C, Wang Y. Effect of heat input on microstructure and mechanical properties of Al–Mg alloys fabricated by WAAM. Appl Surf Sci. 2019;486:431–40. https://doi.org/10.1016/j.apsusc.2019.04.255.10.1016/j.apsusc.2019.04.255 ↗
38. Geng H, Li J, Xiong J, Lin X, Zhang F. Geometric limitation and tensile properties of wire and arc additive manufacturing 5A06 aluminum alloy parts. J Mater Eng Perform. 2017;26:621–9. https://doi.org/10.1007/s11665-016-2480-y.10.1007/s11665-016-2480-y ↗
39. Ren L, Gu H, Wang W, Wang S, Li C, Wang Z, Zhai Y, Ma P. Effect of Mg content on microstructure and properties of Al–Mg alloy produced by the wire arc additive manufacturing method. Materials (Basel). 2019;12:1–12. https://doi.org/10.3390/ma1224160.10.3390/ma1224160 ↗
40. Hauser T, Reisch RT, Breese PP, Nalam Y, Joshi KS, Bela K, Kamps T, Volpp J, Kaplan AFH. Oxidation in wire arc additive manufacturing of aluminium alloys. Addit Manuf. 2021;41: 101958. https://doi.org/10.1016/j.addma.2021.101958.10.1016/j.addma.2021.101958 ↗
41. Fang X, Zhang L, Chen G, Dang X, Huang K, Wang L, Lu B. Correlations between microstructure characteristics and mechanical properties in 5183 aluminium alloy fabricated by wire-arc additive manufacturing with different arc modes. Materials (Basel). 2018;11: 2075. https://doi.org/10.3390/ma11112075.10.3390/ma11112075 ↗
42. Dong B, Cai X, Lin S, Li X, Fan C, Yang C, Sun H. Wire arc additive manufacturing of Al–Zn–Mg–Cu alloy: microstructures and mechanical properties. Addit Manuf. 2020;36: 101447. https://doi.org/10.1016/j.addma.2020.101447.10.1016/j.addma.2020.101447 ↗
43. Dong B, Cai X, Xia Y, Lin S, Fan C, Chen F. Effects of interlayer temperature on the microstructures of wire arc additive manufactured Al–Zn–Mg–Cu alloy: insights into texture responses and dynamic precipitation behaviors. Addit Manuf. 2021;48: 102453. https://doi.org/10.1016/j.addma.2021.102453.10.1016/j.addma.2021.102453 ↗
44. Chen W, Chen Y, Zhang T, Wen T, Feng X, Yin L. Effects of location on the microstructure and mechanical properties of Cu–8Al–2Ni–2Fe–2Mn alloy produced through wire arc additive manufacturing. J Mater Eng Perform. 2020;29:4733–44. https://doi.org/10.1007/s11665-020-04955-y.10.1007/s11665-020-04955-y ↗
45. Wang Y, Chen X, Konovalov S, Su C, Siddiquee AN, Gangil N. In-situ wire-feed additive manufacturing of Cu–Al alloy by addition of silicon. Appl Surf Sci. 2019;487:1366–75. https://doi.org/10.1016/j.apsusc.2019.05.068.10.1016/j.apsusc.2019.05.068 ↗
46. Wang Y, Su C, Konovalov S. Microstructure and mechanical properties of Cu–6.5%Al alloy deposited by wire arc additive manufacturing. Metallogr Microstruct Anal. 2021;10:634–41. https://doi.org/10.1007/s13632-021-00781-3.10.1007/s13632-021-00781-3 ↗
47. Filippov AV, Khoroshko ES, Shamarin NN, Savchenko NL, Moskvichev EN, Utyaganova VR, Kolubaev EA, Smolin AY, Tarasov SY. Characterization of gradient CuAl–B4C composites additively manufactured using a combination of wire-feed and powder-bed electron beam deposition methods. J Alloys Compd. 2021;859: 157824. https://doi.org/10.1016/j.jallcom.2020.157824.10.1016/j.jallcom.2020.157824 ↗
48. Khoroshko ES, Filippov AV, Shamarin NN, Moskvichev EN, Utyaganova VR, Tarasov SY, Savchenko NL, Kolubaev EA, Rubtsov VE, Lychagin DV. Structure and mechanical properties of Cu–Al–Si–Mn system-based copper alloy obtained by additive manufacturing. Russ Phys J. 2021;64:333–9. https://doi.org/10.1007/s11182-021-02333-2.10.1007/s11182-021-02333-2 ↗
49. Liu K, Chen X, Shen Q, Pan Z, Singh RA, Jayalakshmi S, Konovalov S. Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process. Mater Charact. 2020;159: 110011. https://doi.org/10.1016/j.matchar.2019.110011.10.1016/j.matchar.2019.110011 ↗
50. Laghi V, Palermo M, Tonelli L, Gasparini G, Girelli VA, Ceschini L, Trombetti T. Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading. Constr Build Mater. 2022;318: 125925. https://doi.org/10.1016/j.conbuildmat.2021.125925.10.1016/j.conbuildmat.2021.125925 ↗
51. Sun L, Jiang F, Huang R, Yuan D, Guo C, Wang J. Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing. Mater Sci Eng A. 2020;787: 139514. https://doi.org/10.1016/j.msea.2020.139514.10.1016/j.msea.2020.139514 ↗
52. Haden CV, Zeng G, Carter FM, Ruhl C, Krick BA, Harlow DG. Wire and arc additive manufactured steel: tensile and wear properties. Addit Manuf. 2017;16:115–23. https://doi.org/10.1016/j.addma.2017.05.010.10.1016/j.addma.2017.05.010 ↗
53. Huang C, Kyvelou P, Zhang R, Ben Britton T, Gardner L. Mechanical testing and microstructural analysis of wire arc additively manufactured steels. Mater Des. 2022;216: 110544. https://doi.org/10.1016/j.matdes.2022.110544.10.1016/j.matdes.2022.110544 ↗
54. Chintala A, Tejaswi Kumar M, Sathishkumar M, Arivazhagan N, Manikandan M. Technology development for producing Inconel 625 in aerospace application using wire arc additive manufacturing process. J Mater Eng Perform. 2021;30:5333–41. https://doi.org/10.1007/s11665-021-05781-6.10.1007/s11665-021-05781-6 ↗
55. Xu F, Lv Y, Liu Y, Shu F, He P, Xu B. Microstructural evolution and mechanical properties of Inconel 625 alloy during pulsed plasma arc deposition process. J Mater Sci Technol. 2013;29:480–8. https://doi.org/10.1016/j.jmst.2013.02.010.10.1016/j.jmst.2013.02.010 ↗
56. Sharifitabar M, Khorshahian S, ShafieeAfarani M, Kumar P, Jain NK. High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing. Corros Sci. 2022;197: 110087. https://doi.org/10.1016/j.corsci.2022.110087.10.1016/j.corsci.2022.110087 ↗
57. Yu X, Wang S, Zheng D, Shen X, Li Y, Liu W, Su Y, Liu F. Effect of heat treatment on rotating bending fatigue properties of K417G nickel-base superalloy. J Alloys Compd. 2022;905: 164209. https://doi.org/10.1016/j.jallcom.2022.164209.10.1016/j.jallcom.2022.164209 ↗
58. Kaushik V, Kumar BN, Sakthi Kumar S, Vignesh M. Magnesium role in additive manufacturing of biomedical implants—challenges and opportunities. Addit Manuf. 2022;55: 102802. https://doi.org/10.1016/j.addma.2022.102802.10.1016/j.addma.2022.102802 ↗
59. Martinez Holguin DA, Han S, Kim NP. Magnesium alloy 3D printing by wire and arc additive manufacturing (WAAM). MRS Adv. 2018;3:2959–64. https://doi.org/10.1557/adv.2018.553.10.1557/adv.2018.553 ↗
60. Wang Q, Wu G, Tong X. An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy. Mater Lett. 2022;326: 132922. https://doi.org/10.1016/j.matlet.2022.132922.10.1016/j.matlet.2022.132922 ↗
61. Guo Y, Quan G, Celikin M, Ren L, Zhan Y, Fan L, Pan H. Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing. J Magnes Alloy. 2022;10:1930–40. https://doi.org/10.1016/j.jma.2021.04.006.10.1016/j.jma.2021.04.006 ↗
62. Nagamatsu H, Sasahara H. Improvement of cooling effect and dimensional accuracy of wire and arc additive manufactured magnesium alloy by active-cooling-based contacting copper blocks. J Manuf Mater Process. 2022;6:27. https://doi.org/10.3390/jmmp6020027.10.3390/jmmp6020027 ↗
63. Guo J, Zhou Y, Liu C, Wu Q, Chen X, Lu J. Wire arc additive manufacturing of AZ31 magnesium alloy: grain refinement by adjusting pulse frequency. Materials (Basel). 2016;9:823. https://doi.org/10.3390/ma9100823.10.3390/ma9100823 ↗
64. Gneiger S, Österreicher JA, Arnoldt AR, Birgmann A, Fehlbier M. Development of a high strength magnesium alloy for wire arc additive manufacturing. Metals (Basel). 2020;10:1–14. https://doi.org/10.3390/met10060778.10.3390/met10060778 ↗
65. Long J, Wang Z, Yin F, Zhao Y, Li J, Zhang T, Gang W. Microstructure and mechanical property improvement of AZ31B induced by the combination of cold metal transfer welding and friction stir processing. J Mater Eng Perform. 2022;31:3354–61. https://doi.org/10.1007/s11665-021-06429-1.10.1007/s11665-021-06429-1 ↗
66. Yang X, Liu J, Wang Z, Lin X, Liu F, Huang W, Liang E. Microstructure and mechanical properties of wire and arc additive manufactured AZ31 magnesium alloy using cold metal transfer process. Mater Sci Eng A. 2020;774: 138942. https://doi.org/10.1016/j.msea.2020.138942.10.1016/j.msea.2020.138942 ↗
67. Pixner F, Buzolin R, Warchomicka F, Pilz A, Enzinger N. Wire-based electron beam additive manufacturing of tungsten. Int J Refract Met Hard Mater. 2022;108: 105917. https://doi.org/10.1016/j.ijrmhm.2022.105917.10.1016/j.ijrmhm.2022.105917 ↗
68. Marinelli G, Martina F, Ganguly S, Williams S. Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components. Int J Refract Met Hard Mater. 2019;82:329–35. https://doi.org/10.1016/j.ijrmhm.2019.05.009.10.1016/j.ijrmhm.2019.05.009 ↗
69. Marinelli G, Martina F, Ganguly S, Williams S, Lewtas H, Hancock D, Mehraban S, Lavery N. Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacture. J Nucl Mater. 2019;522:45–53. https://doi.org/10.1016/j.jnucmat.2019.04.049.10.1016/j.jnucmat.2019.04.049 ↗
70. Marinelli G, Martina F, Ganguly S, Williams S. Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture. Int J Refract Met Hard Mater. 2019;83:270–6. https://doi.org/10.1016/j.ijrmhm.2019.104974.10.1016/j.ijrmhm.2019.104974 ↗
71. Marinelli G, Martina F, Ganguly S, Williams S. Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling. Addit Manuf. 2020;32: 101009. https://doi.org/10.1016/j.addma.2019.101009.10.1016/j.addma.2019.101009 ↗
72. Marinelli G, Martina F, Lewtas H, Hancock D, Ganguly S, Williams S, Marinelli G, Martina F, Lewtas H, Hancock D. Functionally graded structures of refractory metals by wire arc additive manufacturing. Sci Technol Weld Join. 2019. https://doi.org/10.1080/13621718.2019.1586162.10.1080/13621718.2019.1586162 ↗
73. Malakizadi A, Mallipeddi D, Dadbakhsh S, M’Saoubi R, Krajnik P. Post-processing of additively manufactured metallic alloys—a review. Int J Mach Tools Manuf. 2022;179:3795–814. https://doi.org/10.1016/j.ijmachtools.2022.103908.10.1016/j.ijmachtools.2022.103908 ↗
74. Ahsan MRU, Seo G-J, Fan X, Liaw PK, Motaman S, Haase C, Kim DB. Effects of process parameters on bead shape, microstructure, and mechanical properties in wire + arc additive manufacturing of Al0.1CoCrFeNi high-entropy alloy. J Manuf Process. 2021;68:1314–27. https://doi.org/10.1016/j.jmapro.2021.06.047.10.1016/j.jmapro.2021.06.047 ↗
75. Shen Q, Kong X, Chen X. Fabrication of bulk Al–Co–Cr–Fe–Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): microstructure and mechanical properties. J Mater Sci Technol. 2021;74:136–42. https://doi.org/10.1016/j.jmst.2020.10.037.10.1016/j.jmst.2020.10.037 ↗
76. Liu J, Li J, Du X, Tong Y, Wang R, He D, Cai Z, Wang H. Microstructure and mechanical properties of wire arc additively manufactured MoNbTaWTi high entropy alloys. Materials (Basel). 2021;14:1–12. https://doi.org/10.3390/ma14164512.10.3390/ma14164512 ↗
77. Osintsev K, Konovalov S, Zaguliaev D, Ivanov Y, Gromov V, Panchenko I. Investigation of Co–Cr–Fe–Mn–Ni non-equiatomic high-entropy alloy fabricated by wire arc additive manufacturing. Metals (Basel). 2022;12:197. https://doi.org/10.3390/met12020197.10.3390/met12020197 ↗
78. Alonso U, Veiga F, Suárez A, Artaza T. Experimental investigation of the influence of wire arc additive manufacturing on the machinability of titanium parts. Metals (Basel). 2020;10:24. https://doi.org/10.3390/met10010024.10.3390/met10010024 ↗
79. Ye H, Ye K, Gao Guo B, Bing Le F, Wei C, Sun X, Yong Wang G, Liu Y. Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti–6Al–4V alloy. Mater Charact. 2020;162: 110187. https://doi.org/10.1016/j.matchar.2020.110187.10.1016/j.matchar.2020.110187 ↗
80. De Li C, Gu HM, Wang W, Wang S, Ren LL, Zhai YC, Wang ZB, Ming Z. Microstructure and properties of Al–7Si–0.6Mg alloys with different Ti contents deposited by wire arc additive manufacturing. Rare Met. 2021;40:2530–7. https://doi.org/10.1007/s12598-020-01603-1.10.1007/s12598-020-01603-1 ↗
81. Wang Y, Konovalov S, Chen X, Ivanov Y, Jayalakshmi S, Singh RA. Research on Cu–6.6%Al–3.2%Si alloy by dual wire arc additive manufacturing. J Mater Eng Perform. 2021;30:1694–702. https://doi.org/10.1007/s11665-021-05470-4.10.1007/s11665-021-05470-4 ↗
82. Ghaffari M, Vahedi Nemani A, Nasiri A. Microstructure and mechanical behavior of PH 13–8Mo martensitic stainless steel fabricated by wire arc additive manufacturing. Addit Manuf. 2022;49: 102374. https://doi.org/10.1016/j.addma.2021.102374.10.1016/j.addma.2021.102374 ↗
83. Li Y, Yuan Y, Wang D, Fu S, Song D, Vedani M, Chen X. Low cycle fatigue behavior of wire arc additive manufactured and solution annealed 308 L stainless steel. Addit Manuf. 2022;52: 102688. https://doi.org/10.1016/j.addma.2022.102688.10.1016/j.addma.2022.102688 ↗
84. Mookara RK, Seman S, Jayaganthan R, Amirthalingam M. Influence of droplet transfer behaviour on the microstructure, mechanical properties and corrosion resistance of wire arc additively manufactured Inconel (IN) 625 components. Weld World. 2021;65:573–88. https://doi.org/10.1007/s40194-020-01043-6.10.1007/s40194-020-01043-6 ↗
85. Mohan Kumar S, Rajesh Kannan A, Pravin Kumar N, Pramod R, Siva Shanmugam N, Vishnu AS, Channabasavanna SG. Microstructural features and mechanical integrity of wire arc additive manufactured SS321/Inconel 625 functionally gradient material. J Mater Eng Perform. 2021;30:5692–703. https://doi.org/10.1007/s11665-021-05617-3.10.1007/s11665-021-05617-3 ↗
86. Zavdoveev A, Pozniakov V, Baudin T, Seop H, Ilya K, Gajvoronskiy A, Skoryk M. Optimization of the pulsed arc welding parameters for wire arc additive manufacturing in austenitic steel applications. Int J Adv Manuf Technol. 2022;119:5175–93.10.1007/s00170-022-08704-4 ↗
87. Li J, Qiu Y, Yang J, Sheng Y, Yi Y, Zeng X, Chen L, Yin F, Su J, Zhang T, Tong X, Guo B. Effect of grain refinement induced by wire and arc additive manufacture (WAAM) on the corrosion behaviors of AZ31 magnesium alloy in NaCl solution. J Magnes Alloy. 2021. https://doi.org/10.1016/j.jma.2021.04.007.10.1016/j.jma.2021.04.007 ↗
88. Cunningham CR, Flynn JM, Shokrani A, Dhokia V, Newman ST. Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf. 2018;22:672–86. https://doi.org/10.1016/j.addma.2018.06.020.10.1016/j.addma.2018.06.020 ↗
89. Kumar Sinha A, Pramanik S, Yagati KP. Research progress in arc based additive manufacturing of aluminium alloys—a review. Meas J Int Meas Confed. 2022;200: 111672. https://doi.org/10.1016/j.measurement.2022.111672.10.1016/j.measurement.2022.111672 ↗
90. Wang J, Pan Z, Wang Y, Wang L, Su L, Cuiuri D, Zhao Y, Li H. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy. Addit Manuf. 2020;34: 101240. https://doi.org/10.1016/j.addma.2020.101240.10.1016/j.addma.2020.101240 ↗
91. Ke WC, Oliveira JP, Cong BQ, Ao SS, Qi ZW, Peng B, Zeng Z. Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys. Addit Manuf. 2022;50: 102513. https://doi.org/10.1016/j.addma.2021.102513.10.1016/j.addma.2021.102513 ↗
92. Cong B, Cai X, Qi Z, Qi B, Zhang Y, Zhang R, Guo W, Zhou Z, Yin Y, Bu X. The effects of ultrasonic frequency pulsed arc on wire + arc additively manufactured high strength aluminum alloys. Addit Manuf. 2022;51: 102617. https://doi.org/10.1016/j.addma.2022.102617.10.1016/j.addma.2022.102617 ↗
93. Waszink JH, Graat HJ. Experimental investigation of the forces acting on a drop of weld metal. Weld J. 1983;62:108–16.
94. Wu B, Ding D, Pan Z, Cuiuri D, Li H, Han J, Fei Z. Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V. J Mater Process Technol. 2017;250:304–12. https://doi.org/10.1016/j.jmatprotec.2017.07.037.10.1016/j.jmatprotec.2017.07.037 ↗
95. Jiang X, Di X, Li C, Wang D, Hu W. Improvement of mechanical properties and corrosion resistance for wire arc additive manufactured nickel alloy 690 by adding TiC particles. J Alloys Compd. 2022;928: 167198. https://doi.org/10.1016/j.jallcom.2005.05.002.10.1016/j.jallcom.2005.05.002 ↗
96. Corradi DR, Bracarense AQ, Wu B, Cuiuri D, Pan Z, Li H. Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing. J Mater Process Technol. 2020;283: 116723. https://doi.org/10.1016/j.jmatprotec.2020.116723.10.1016/j.jmatprotec.2020.116723 ↗
97. Huan P, Wei X, Wang X, Di H, Chen Y, Zhang Q, Chen X, Shen X. Comparative study on the microstructure, mechanical properties and fracture mechanism of wire arc additive manufactured Inconel 718 alloy under the assistance of alternating magnetic field. Mater Sci Eng A. 2022;854: 143845. https://doi.org/10.1016/j.msea.2022.143845.10.1016/j.msea.2022.143845 ↗
98. Zheng Y, Cao L, Wang J, Xie J, Chen J, Wang D, Wang S, Xu J, Lu H. Surface morphology refinement and Laves phase control of plasma arc additively manufactured Inconel 718 via an alternating magnetic field. Mater Des. 2022;223: 111161. https://doi.org/10.1016/j.matdes.2022.111161.10.1016/j.matdes.2022.111161 ↗
99. Qiu Z, Dong B, Wu B, Wang Z, Carpenter K, Wu T, Zhang J, Wexler D, Zhu H, Li H. Tailoring the surface finish, dendritic microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy by magnetic arc oscillation. Addit Manuf. 2021;48: 102397. https://doi.org/10.1016/j.addma.2021.102397.10.1016/j.addma.2021.102397 ↗
100. Wang X, Wang A, Li Y. Study on the deposition accuracy of omni-directional GTAW-based additive manufacturing. J Mater Process Technol. 2020;282: 116649. https://doi.org/10.1016/j.jmatprotec.2020.116649.10.1016/j.jmatprotec.2020.116649 ↗