Comparison of traditional processing and additive manufacturing technologies in various performance aspects: a review
Source abstract
Abstract
Additive manufacturing, also known as 3D printing, is a revolutionary manufacturing technology. This paper compares the differences between additive manufacturing technologies, such as Fused Deposition Modeling, Selective Laser Sintering, Selective Laser Melting, Stereolithography, Layered Object Manufacturing, and traditional manufacturing processes, such as subtractive and equal manufacturing. The paper mainly discusses the differences between laser additive manufacturing and traditional processing technology in processing principles and materials. The development status of metal alloys, polymer composites, ceramics, and concrete are introduced in the paper. The advantages of metal products manufactured by additive manufacturing technology in mechanical properties and microstructure evolution are highlighted. The paper also identifies the reasons limiting the development of additive manufacturing technology and proposes future prospects, providing a theoretical basis for future research on additive manufacturing technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Guo N, Leu MC. Additive manufacturing: technology, applications and research needs. Front Mech eng-prc. 2013;8:215–43. https://doi.org/10.1007/s11465-013-0248-8.10.1007/s11465-013-0248-8 ↗
2. Baumers M, Dickens P, Tuck C, Hague R. The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technol Forecast Soc. 2016;102:193–201. https://doi.org/10.1016/j.techfore.2015.02.015.10.1016/j.techfore.2015.02.015 ↗
3. Cooke S, Ahmadi K, Willerth S. Metal additive manufacturing: technology, metallurgy and modelling. J Manuf Process. 2020;57:978–1003. https://doi.org/10.1016/j.jmapro.2020.07.025.10.1016/j.jmapro.2020.07.025 ↗
4. Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23:1917–28. https://doi.org/10.1007/s11665-014-0958-z.10.1007/s11665-014-0958-z ↗
5. Cam G. Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM). Mater Today Proc. 2022;62:77–85. https://doi.org/10.1016/j.matpr.2022.02.137.10.1016/j.matpr.2022.02.137 ↗
6. Cooper DE, Stanford M, Kibble KA, Gibbons GJ. Additive manufacturing for product improvement at red bull technology. Mater Design. 2012;41:226–30. https://doi.org/10.1016/j.matdes.2012.05.017.10.1016/j.matdes.2012.05.017 ↗
7. Gonzalez JA, Mireles J, Lin Y. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology. Ceram Int. 2016. https://doi.org/10.1016/j.ceramint.2016.03.079.10.1016/j.ceramint.2016.03.079 ↗
8. Sanaei N, Fatemi A. Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review. Prog Mater Sci. 2012;117:1000724. https://doi.org/10.1016/j.pmatsci.2020.100724.10.1016/j.pmatsci.2020.100724 ↗
9. Gunen A, Gurol U, Kocak M. Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature. Prog Addit Manuf. 2023. https://doi.org/10.1007/s40964-023-00398-8.10.1007/s40964-023-00398-8 ↗
10. Ceritbinmez F, Gunen A, Gurol U. A comparative study on drillability of Inconel 625 alloy fabricated by wire arc additive manufacturing. J Manuf Process. 2023;89:150–69. https://doi.org/10.1016/j.jmapro.2023.01.072.10.1016/j.jmapro.2023.01.072 ↗
11. Gunen A, Gurol U, Kocak M. 2023 A new approach to improve some properties of wire arc additively manufactured stainless steel components: simultaneous homogenization and boriding. Surf Coat Tech. 2023;460:129395. https://doi.org/10.1016/j.surfcoat.2023.129395.10.1016/j.surfcoat.2023.129395 ↗
12. Senthil TS, Ramesh Babu S, Puviyarasan M. Mechanical and microstructural characterization of functionally graded Inconel 825-SS316L fabricated using wire arc additive manufacturing. J Mater Res Technol. 2021;15:661–9. https://doi.org/10.1016/j.jmrt.2021.08.060.10.1016/j.jmrt.2021.08.060 ↗
13. Miller EP, Vandome AF, Mcbrewster J. Fused deposition modeling (2010).
14. Thrimurthulu K, Pandey PM, Reddy NV. Optimum part deposition orientation in fused deposition modeling. Int J Mach Tool Manu. 2004;44:585–94. https://doi.org/10.1016/j.ijmachtools.2003.12.004.10.1016/j.ijmachtools.2003.12.004 ↗
15. Qi F, Walther M, Hans-Christian M. Application of machine learning to optimize process parameters in fused deposition modeling of PEEK material. Procedia CIRP. 2022;107:1–8. https://doi.org/10.1016/j.procir.2022.04.001.10.1016/j.procir.2022.04.001 ↗
16. Panda BN, Shankhwar K, Garg A. Performance evaluation of warping characteristic of fused deposition modelling process. Int J Adv Manuf Tech. 2016;88:1–13. https://doi.org/10.1007/s00170-016-8914-8.10.1007/s00170-016-8914-8 ↗
17. Smith WC, Dean RW. Structural characteristics of fused deposition modeling polycarbonate material. Polym Test. 2013;32:1306–12. https://doi.org/10.1016/j.polymertesting.2013.07.014.10.1016/j.polymertesting.2013.07.014 ↗
18. Ogden S, Kessler S. Anisotropic finite element modeling of the fused deposition modeling process. Charact Miner Metals Mater. 2014. https://doi.org/10.1002/9781118888056.ch28.10.1002/9781118888056.ch28 ↗
19. Kumar S. Selective laser sintering: a qualitative and objective approach. JOM. 2003;55(10):43–7. https://doi.org/10.1007/s11837-003-0175-y.10.1007/s11837-003-0175-y ↗
20. Kruth JP, Wang X, Laoui T. Lasers and materials in selective laser sintering. Assembly Autom. 2003;23:357–71. https://doi.org/10.1108/01445150310698652.10.1108/01445150310698652 ↗
21. Duan B, Wang M. Selective Laser Sintering and Its Biomedical Applications. Berlin Heidelberg: Springer; 2013. https://doi.org/10.1007/978-3-642-41341-4_4.10.1007/978-3-642-41341-4_4 ↗
22. Hooper PA. Melt pool temperature and cooling rates in laser powder bed fusion[J]. Addit Manuf. 2018;22:548–59. https://doi.org/10.1016/j.addma.2018.05.032.10.1016/j.addma.2018.05.032 ↗
23. Silva DN, de Oliveira MG. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. J Cranio Maxill Surg. 2008;36:443–9. https://doi.org/10.1016/j.jcms.2008.04.003.10.1016/j.jcms.2008.04.003 ↗
24. Zhang X, Liao Y. A phase-field model for solid-state selective laser sintering of metallic materials. Powder Technol. 2018. https://doi.org/10.1016/j.powtec.2018.08.025.10.1016/j.powtec.2018.08.025 ↗
25. Niu HJ, Chang I. Liquid phase sintering of M3/2 high speed steel by selective laser sintering. Scripta Mater. 1998;39:67–72. https://doi.org/10.1016/S1359-6462(98)00126-2.10.1016/S1359-6462(98)00126-2 ↗
26. Xiao B, Zhang Y. Partial melting and resolidification of metal powder in selective laser sintering. J Thermophys Heat Tr. 2006;20:439–48. https://doi.org/10.2514/1.17904.10.2514/1.17904 ↗
27. Kim J, Creasy TS. Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite. Polym Test. 2004;23:629–36. https://doi.org/10.1016/j.polymertesting.2004.01.014.10.1016/j.polymertesting.2004.01.014 ↗
28. Lee PH, Chang YS. Modification and characteristics of biodegradable polymer suitable for selective laser sintering. Int J Precis Eng Man. 2013;14:1079–86. https://doi.org/10.1007/s12541-013-0145-4.10.1007/s12541-013-0145-4 ↗
29. Miura H, Osada T, Ishibashi H, Okawachi K, Uemura M. Development of selective laser sintering for titanium alloy powder3rd report. J Jpn Soc Powder Powder Metall. 2008;55:738–42. https://doi.org/10.2497/jjspm.55.738.10.2497/jjspm.55.738 ↗
30. Thijs L, Verhaeghe F, Craeghs T. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V. Acta Mater. 2010;58:3303–12. https://doi.org/10.1016/j.actamat.2010.02.004.10.1016/j.actamat.2010.02.004 ↗
31. Ceo OB. Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties. J Mater Process Tech. 2013;213:1387–405. https://doi.org/10.1016/j.jmatprotec.2013.03.009.10.1016/j.jmatprotec.2013.03.009 ↗
32. Alkahari MR, Furumoto T, Da T. Melt pool and single track formation in selective laser sintering/selective laser melting. Adv Mater Res. 2014;933:196–201. https://doi.org/10.4028/www.scientific.net/AMR.933.196.10.4028/www.scientific.net/AMR.933.196 ↗
33. Kruth JP, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M. Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J. 2005;11:26–36. https://doi.org/10.1108/13552540510573365.10.1108/13552540510573365 ↗
34. Clare T, Chalker PR, Davies S, Tsopanos SS. Selective laser melting of high aspect ratio 3D nickel-titanium structures two way trained for MEMS applications. Int J Mech Mater Des. 2008;4:181–7. https://doi.org/10.1007/s10999-007-9032-4.10.1007/s10999-007-9032-4 ↗
35. Wehmller M, Warnke PH, Zilian C. Implant design and production-a new approach by selective laser melting. Int Congr Ser. 2005;1281:690–5. https://doi.org/10.1016/j.ics.2005.03.155.10.1016/j.ics.2005.03.155 ↗
36. Kruth JP, Froyen L, van Vaerenbergh J. Selective laser melting of iron-based Powder. J Mater process Tech. 2004;149:616–22. https://doi.org/10.1016/j.jmatprotec.2003.11.051.10.1016/j.jmatprotec.2003.11.051 ↗
37. Zhou M, Liu W, Wu H. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography-Optimization of the drying and debinding processes. Ceram Int. 2016. https://doi.org/10.1016/j.ceramint.2016.04.050.10.1016/j.ceramint.2016.04.050 ↗
38. Chou S, Chou CC, Chen YK. A base function for generating contour traversal paths in stereolithography apparatus applications. Expert Syst Appl. 2008;35:235–44. https://doi.org/10.1016/j.eswa.2007.06.025.10.1016/j.eswa.2007.06.025 ↗
39. Huang BW, Du ZP, Tao Y. Preparation of a novel hybrid type photosensitive resin for stereolithography in 3D printing and testing on the accuracy of the fabricated parts. Adv Mater Res. 2011;3:3043–7. https://doi.org/10.4028/www.scientific.net/AMR.239-242.3043.10.4028/www.scientific.net/AMR.239-242.3043 ↗
40. Huang J. Study on the properties of SL7510 type photosensitive resin for laser curing rapid prototyping. Acta Optica Sinica. 2008;28:2354–8. https://doi.org/10.3788/AOS20082812.2354.10.3788/AOS20082812.2354 ↗
41. Fai LK, Kai CC, Hock TC. Microblasting characteristics of jewellery models built using stereolithography apparatus (SLA). Int J Adv Manuf Tech. 1998;14:450–8. https://doi.org/10.1007/BF01304624.10.1007/BF01304624 ↗
42. Park J, Tari MJ, Hahn HT. Characterization of the laminated object manufacturing (LOM) process. Rapid Prototyp J. 2000;6:36–50. https://doi.org/10.1108/13552540010309868.10.1108/13552540010309868 ↗
43. Utela B, Storti D, Anderson R. A review of process development steps for new material systems in three dimensional printing (3DP). J Manuf Process. 2008;10:96–104. https://doi.org/10.1016/j.jmapro.2009.03.002.10.1016/j.jmapro.2009.03.002 ↗
44. Ibrahim D, Broilo TL, Heitz C. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy. J Craniomaxillofac Surg. 2009;37:167–73. https://doi.org/10.1016/j.jcms.2008.10.008.10.1016/j.jcms.2008.10.008 ↗
45. Gomes CM, Rambo CR, Oliveira AP. Colloidal processing of glass-ceramics for laminated object manufacturing. J Am Ceram Soc. 2010;92:1186–91. https://doi.org/10.1111/j.1551-2916.2009.03035.x.10.1111/j.1551-2916.2009.03035.x ↗
46. Liao A. new approach of online waste removal process for laminated object manufacturing (LOM). J Mater Process Tech. 2003;140:136–40. https://doi.org/10.1016/S0924-0136(03)00690-3.10.1016/S0924-0136(03)00690-3 ↗
47. O’Connor J, Punch J, Jeffers N. A comparison between the hydrodynamic characteristics of 3D-printed polymer and etched silicon microchannels. Microfluid Nanofluid. 2015. https://doi.org/10.1007/s10404-015-1569-1.10.1007/s10404-015-1569-1 ↗
48. Jia W, Gungor-Ozkerim PS, Yu SZ. Direct 3D bioprinting of perfusable vascular constructs using a blend bioink. Biomaterials. 2016;106:58–68. https://doi.org/10.1016/j.biomaterials.2016.07.038.10.1016/j.biomaterials.2016.07.038 ↗
49. Deville S. Ice-templating, freeze casting: beyond materials processing. J Mater Res. 2013;28:2202–19. https://doi.org/10.1557/jmr.2013.105.10.1557/jmr.2013.105 ↗
50. Petrov P, Perfilov V, Stebunov S. Prevention of lap formation in near net shape isothermal forging technology of part of irregular shape made of aluminium alloy A92618. J Mater Process Tech. 2006;177:218–23. https://doi.org/10.1016/j.jmatprotec.2006.03.206.10.1016/j.jmatprotec.2006.03.206 ↗
51. Cao X, Jahazi M, Immarigeon JP. A review of laser welding techniques for magnesium alloys. J Mater Process Tech. 2006;171:188–204. https://doi.org/10.1016/j.jmatprotec.2005.06.068.10.1016/j.jmatprotec.2005.06.068 ↗
52. Özgün Ö, Gülsoy HÖ, Yılmaz R. Microstructural and mechanical characterization of injection molded 718 superalloy powders. J Alloy Compd. 2013;576:140–53. https://doi.org/10.1016/j.jallcom.2013.04.042.10.1016/j.jallcom.2013.04.042 ↗
53. Xu KK, Zhang L, Gao LL. Review of microstructure and properties of low temperature lead-free solder in electronic packaging. Sci Technol Adv Mat. 2020;2:689–711. https://doi.org/10.1080/14686996.2020.1824255.10.1080/14686996.2020.1824255 ↗
54. Bertrand C. The laser welding technique applied to the non precious dental alloys procedure and results. Br Dent J. 2001;190:255–255. https://doi.org/10.1038/sj.bdj.4800942a.10.1038/sj.bdj.4800942a ↗
55. Chang KC, Lu HI, Peng CW. Nanocasting technique to prepare lotus-leaf-like superhydrophobic electroactive polyimide as advanced anticorrosive coatings. Acs Appl Mater Inter. 2013;5:1460–7. https://doi.org/10.1021/am3029377.10.1021/am3029377 ↗
56. Nowak J, Madej L, Grosman F. The material flow analysis in the modified orbital forging technology. Mater Sci Forum. 2010;654–656:1622–5. https://doi.org/10.4028/www.scientific.net/MSF.654-656.1622.10.4028/www.scientific.net/MSF.654-656.1622 ↗
57. Priyavrat T. Competitive foundry through integration of TIPS (technology, innovation, product design and process systems. Indian Foundry J. 2012;58:37–42.
58. Sadade V, Dhake A, Dixit N. Magnetic mould casting: methodology and comparison with traditional sand casting process. Int Adv Res J Sci Eng Technol. 2016;3:223–6. https://doi.org/10.17148/IARJSET/ICAME.43.10.17148/IARJSET/ICAME.43 ↗
59. Zheng J, Zhou X, Yu Y. Low carbon, high efficiency and sustainable production of traditional manufacturing methods through process design strategy: improvement process for sand casting defects. J Clean Prod. 2019;253:119917. https://doi.org/10.1016/j.jclepro.2019.119917.10.1016/j.jclepro.2019.119917 ↗
60. Tseng A. Topical review: recent developments in micromilling using focused ion beam technology. J Micromech Microeng. 2004;14:15–34. https://doi.org/10.1088/0960-1317/14/4/R01.10.1088/0960-1317/14/4/R01 ↗
61. Malkin S. Grinding technology: theory and applications of machining with abrasives. Int J Mach Tools Manuf. 1991;31:435–6. https://doi.org/10.1016/0890-6955(91)90088-K.10.1016/0890-6955(91)90088-K ↗
62. Newman ST, Zhu Z, Dhokia V. Process planning for additive and subtractive manufacturing technologies. Cirp Ann. 2015;64:467–70. https://doi.org/10.1016/j.cirp.2015.04.109.10.1016/j.cirp.2015.04.109 ↗
63. Kurata Y, Merdol SD, Altintas Y. Chatter stability in turning and milling with in process identified process damping. J Adv Mech Des Syst. 2010;4:1107–18. https://doi.org/10.1299/jamdsm.4.1107.10.1299/jamdsm.4.1107 ↗
64. Blanchard PH. Technology of corn wet milling and associated processes. Amsterdam: Elsevier; 1992.
65. Xie J, Luo MJ, Wu KK. Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool. Ind Eng ManaG Syst. 2013;73(1):25–36. https://doi.org/10.1016/j.ijmachtools.2013.05.006.10.1016/j.ijmachtools.2013.05.006 ↗
66. Chen W. Preparation of water-soluble nanographite and its application in water-based cutting fluid. Nanoscale Res Lett. 2013;8:52–52. https://doi.org/10.1186/1556-276X-8-52.10.1186/1556-276X-8-52 ↗
67. Stanford M, Lister PM, Morgan C, et al. Investigation into the use of gaseous and liquid nitrogen as a cutting fluid when turning BS 970–80A15 (En32b) plain carbon steel using WC-Co uncoated tooling. J Mater Process Tech. 2009;209:961–72. https://doi.org/10.1016/j.jmatprotec.2008.03.003.10.1016/j.jmatprotec.2008.03.003 ↗
68. Yao SH, Su YL. On the micro-drilling and turning performance of TiN/AlN nano-multilayer films. Mater Sci Eng A. 2005;392:340–7. https://doi.org/10.1016/j.msea.2004.09.050.10.1016/j.msea.2004.09.050 ↗
69. Morita Y, Sasaki A. Composite cured silicone powder and method for the preparation thereof. US5756568 A, US, 1998.
70. Drakin NV Pyrotechnical, aerosol-forming composition for extinguishing fires and process for its preparation. US, 2001.
71. Zhang Y, Zhang YW, Zhang FG. Effect of powder particle size on microstructure and mechanical property of Ni-Based P/M superalloy product. J Iron Steel Res Int. 2003;10:72–5. https://doi.org/10.1007/s11837-003-0111-1.10.1007/s11837-003-0111-1 ↗
72. Xiao J, Zhou F, Chen YB. Preparation of AlN powder by microwave carbon thermal reduction. J Inorg Mater. 2009;24:755–8. https://doi.org/10.3724/SP.J.1077.2009.00755.10.3724/SP.J.1077.2009.00755 ↗
73. Nekouie RK, Rashchi F, Joda NN. Effect of organic additives on synthesis of copper nano powders by pulsing electrolysis. Powder Tech. 2013;237:554–61. https://doi.org/10.1016/j.powtec.2012.12.046.10.1016/j.powtec.2012.12.046 ↗
74. Hsu TI, Wei CM. Nitinol powders generate from plasma rotation electrode process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition. Sci Rep. 2018;8:13776. https://doi.org/10.1038/s41598-018-32101-1.10.1038/s41598-018-32101-1 ↗
75. Cui Y, Zhao Y, Numata H. Effects of process parameters and cooling gas on powder formation during the plasma rotating electrode process. Powder Technol. 2021;393:301–11. https://doi.org/10.1016/j.powtec.2021.07.062.10.1016/j.powtec.2021.07.062 ↗
76. Qiu S, Chen BK, Xiang C. Preparation and properties of spherical mo powders by plasma rotating electrode process for additive manufacturing. Mater Sci Forum. 2020;993:391–7. https://doi.org/10.4028/www.scientific.net/MSF.993.391.10.4028/www.scientific.net/MSF.993.391 ↗
77. Li SJ, Cui TC, Hao L. Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation. Acta Biomater. 2008;4:305–17. https://doi.org/10.1016/j.actbio.2007.09.009.10.1016/j.actbio.2007.09.009 ↗
78. Czarnowska E, Wierzchoń T, Maranda-Niedba A. Properties of the surface layers on titanium alloy and their biocompatibility in in vitro tests. J Mater Process Tech. 1999;92–93:190–4. https://doi.org/10.1016/S0924-0136(99)00228-9.10.1016/S0924-0136(99)00228-9 ↗
79. Withers JC, Shapovalov V, Storm R. The production of titanium alloy powder. Key Eng Mater. 2013;551:32–6. https://doi.org/10.4028/www.scientific.net/KEM.551.32.10.4028/www.scientific.net/KEM.551.32 ↗
80. Kuroda S, Saida K, Nishimoto K. Microstructure and properties of directly bonded joint of A6061 aluminum alloy to SUS316 stainless steel-study on diffusion bonding of aluminum alloy to stainless steel (report 1). Q J Jpn Weld Soc. 1999;17:484–9. https://doi.org/10.2207/qjjws.17.484.10.2207/qjjws.17.484 ↗
81. Olakanmi EO, Cochrane RF, Dalgarno KW. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties. Prog Mater Sci. 2015;74:401–77. https://doi.org/10.1016/j.pmatsci.2015.03.002.10.1016/j.pmatsci.2015.03.002 ↗
82. Li Y, Gu D. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Design. 2014;63:856–67. https://doi.org/10.1016/j.matdes.2014.07.006.10.1016/j.matdes.2014.07.006 ↗
83. Rockiasamy A, German R, Wang P. DSC analysis of Al6061 aluminum alloy powder by rapid solidification. J Therm Anal Calorim. 2010;100:361–6. https://doi.org/10.1007/s10973-009-0587-1.10.1007/s10973-009-0587-1 ↗
84. Kenzari S, Bonina D, Dubois JM. Additive manufacturing of lightweight, fully Al-based components using quasicrystals. J Mater Process Tech. 2014;214:3108–11. https://doi.org/10.1016/j.jmatprotec.2014.07.011.10.1016/j.jmatprotec.2014.07.011 ↗
85. Ghosh SK, Bandyopadhyay K, Saha P. Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique-Optimization of process parameters. Mater Charac. 2014;93:68–78. https://doi.org/10.1016/j.matchar.2014.03.021.10.1016/j.matchar.2014.03.021 ↗
86. Gotman I, Koczak MJ, Shtessel E. Fabrication of A1 matrix in situ composites via self-propagating synthesis. Mater Sci Eng A. 1994;187:18–99. https://doi.org/10.1016/0921-5093(94)90347-6.10.1016/0921-5093(94)90347-6 ↗
87. Sheibani N. In situ fabrication of Al-TiC metal matrix composites by reactive slag process. Mater Des. 2007;28:2373–8. https://doi.org/10.1016/j.matdes.2006.08.004.10.1016/j.matdes.2006.08.004 ↗
88. Li XP, Kang CW, Huang H. Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: processing, microstructure evolution and mechanical properties. Mater Sci Eng A. 2014;606:370–9. https://doi.org/10.1016/j.msea.2014.03.097.10.1016/j.msea.2014.03.097 ↗
89. Thakur DG, Ramamoorthy B, Vijayaraghavan L. Study on the machinability characteristics of superalloy Inconel 718 during high speed turning. Mater Design. 2011;30:1718–25. https://doi.org/10.1016/j.matdes.2008.07.011.10.1016/j.matdes.2008.07.011 ↗
90. Qiong Wu, Yang R-b. A comparative study of four modified Al coatings on Ni3Al-based single crystal superalloy. Prog Nat Sci. 2011;21:496–505. https://doi.org/10.1016/S1002-0071(12)60089-6.10.1016/S1002-0071(12)60089-6 ↗
91. Rao G, Srinivas M, Sarma DS. Effect of oxygen content of powder on microstructure and mechanical properties of hot isotatically pressed superalloy Inconel 718. Mater Sci Eng A. 2006;435:84–99. https://doi.org/10.1016/j.msea.2006.07.053.10.1016/j.msea.2006.07.053 ↗
92. Zhong C, Chen J, Linnenbrin S. A comparative study of Inconel 718 formed by high deposition rate laser metal deposition with ga powder and prep powder. Mater Design. 2016;107:386–92. https://doi.org/10.1016/j.matdes.2016.06.037.10.1016/j.matdes.2016.06.037 ↗
93. Shah D, Duhl D. The effect of orientation, temperature and gamma prime size on the yield strength of a single crystal nickel base superalloy. Mater Sci. 1984. https://doi.org/10.7449/1984/Superalloys_1984_105_114.10.7449/1984/Superalloys_1984_105_114 ↗
94. Monajati H, Taheri AK, Jahazi M. Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy. Metall Mater Trans A. 2005;36:895–905. https://doi.org/10.1007/s11661-005-0284-z.10.1007/s11661-005-0284-z ↗
95. Pang HT, Reed P. Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy. Int J Fatigue. 2008;30:2009–20. https://doi.org/10.1016/j.ijfatigue.2008.01.001.10.1016/j.ijfatigue.2008.01.001 ↗
96. Davidson DL. Mixed-mode crack opening displacement measurements for small fatigue cracks growing in Astroloy at 20°C. Fatigue Fract Eng Mater Struct. 2010;23:445–52. https://doi.org/10.1046/j.1460-2695.2000.00293.x.10.1046/j.1460-2695.2000.00293.x ↗
97. Qiu CL, Attallah MM, Wu XH. Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder. Mater Sci Eng A. 2013;564:176–85. https://doi.org/10.1016/j.msea.2012.11.084.10.1016/j.msea.2012.11.084 ↗
98. Nagai M, Tomoyose H, Nishino T. Fabrication of Li3PO4-Al2O3 composites by use of an electrochemical deposition technique. Phosphorus Res Bull. 2012;2:81–6. https://doi.org/10.3363/prb1992.2.0_81.10.3363/prb1992.2.0_81 ↗
99. Olakanmi S. laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: effect of processing conditions and powder properties. J Mater Process TECH. 2013;213:1387–405. https://doi.org/10.1016/j.jmatprotec.2013.03.009.10.1016/j.jmatprotec.2013.03.009 ↗
100. Qiu HP, Chen MW, Xie WJ. Research and application of SiC/SiC ceramic matrix composites. Aeronautical Manuf Technol. 2015;483:94–7.