article·2018-12-07

Softening mechanism of P91 steel weldments using heat treatments

Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Freedon Daniel, Balamurugan Adhithan

Publisher page

Abstract

Abstract The tungsten inert gas welded P91 steel welded joints were subjected to the two different type of heat treatments including the postweld direct tempering (PWDT) and re-austenitizing based tempering (PWNT) treatment. The microstructure of weld fusion and heat affected zone (HAZ) were characterized in different heat treatment conditions using optical microscope and scanning electron microscope. For as-welded joint, a great heterogeneity was observed in microstructure and mechanical properties across the weldments. The Charpy toughness of the as-welded joint was measured much lower than the minimum recommended value of 47 J and it was measured 8 ± 5 J. The PWHTs have found a beneficial effect in decreasing the microstructure heterogeneity across the welded joint and improving the mechanical properties. The PWDT resulted in a drastic improvement in the Charpy impact toughness of the welded joint and it was measured 59 ± 5 J which was higher than the minimum required value of 47 J but still inferior than the base metal. The δ ferrite still remained in overlap zone of the weld fusion zone. The PWNT treatment resulted in homogeneous microstructure and hardness variation across the welded joint in transverse direction and Charpy impact toughness (149 ± 6 J) exceeded than that achieved in base metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.