Deformation-induced martensite in austenitic stainless steels: A review
Source abstract
Abstract
Recent progress in the understanding of the deformation-induced martensitic transformation, the transformation-induced plasticity (TRIP) effect, and the reversion annealing in the metastable austenitic stainless steels are reviewed in the present work. For this purpose, the introduced methods for the measurement of martensite content are summarized. Moreover, the austenite stability as the key factor for controlling the austenite to martensite transformation is critically discussed. This is realized by analyzing the effects of chemical composition, initial grain size, applied strain, deformation temperature, strain rate, and deformation mode (stress state). For instance, the effect of initial grain size is found to be complicated, especially in the ultrafine grained (UFG) regime. Furthermore, it seems that there is a critical grain size for changing the trend of α′-martensite formation. Decreasing the deformation temperature motivates the formation of α′-martensite, but there is a critical temperature for achieving the maximum tensile ductility. Afterwards, the modeling techniques for the transformation kinetics and the contribution of deformation-induced martensitic transformation to the strengthening of material and also strength-ductility trade-off are critically surveyed. The processing of UFG microstructure during reversion annealing, the effects of the recrystallization of the retained austenite, the martensitic shear and diffusional reversion mechanisms, and the annealing-induced martensitic transformation are also summarized. Accordingly, this overview presents the opportunities that the strain-induced martensitic transformation can offer for controlling the microstructure and mechanical properties of metastable austenitic stainless steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Lo KH, Shek CH, Lai JKL. Recent developments in stainless steels. Mater Sci Eng R Rep. 2009;65:39–104.10.1016/j.mser.2009.03.001 ↗
2. Järvenpää A, Jaskari M, Kisko A, Karjalainen P. Processing and properties of reversion-treated austenitic stainless steels. Metals. 2020;10:281.10.3390/met10020281 ↗
3. Padilha AF, Plaut RL, Rios PR. Annealing of cold-worked austenitic stainless steels. ISIJ Int. 2003;43:135–43.10.2355/isijinternational.43.135 ↗
4. Karjalainen LP, Taulavuori T, Sellman M, Kyröläinen A. Some strengthening methods for austenitic stainless steels. Steel Res Int. 2008;79:404–12.10.1002/srin.200806146 ↗
5. Sohrabi MJ, Mirzadeh H, Dehghanian C. Significance of martensite reversion and austenite stability on the mechanical properties and TRIP effect of austenitic stainless steels. J Mater Eng Perform. 2020;29:3233–42.10.1007/s11665-020-04798-7 ↗
6. Maki T. Stainless steel: progress in thermomechanical treatment. Curr Opin Solid State Mater Sci. 1997;2:290–5.10.1016/S1359-0286(97)80117-9 ↗
7. Li J, Zhou Z, Wang S, Mao Q, Fang C, Li Y, Wang G, Kang J, Zhu X. Deformation mechanisms and enhanced mechanical properties of 304L stainless steel at liquid nitrogen temperature. Mater Sci Eng A. 2020;798:140133.10.1016/j.msea.2020.140133 ↗
8. Sharifian K, Mirzadeh H, Kheiri S, Naghizadeh M. Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel. Int J Mater Res. 2020;111:8.
9. Huang K, Logé RE. A review of dynamic recrystallization phenomena in metallic materials. Mater Des. 2016;111:548–74.10.1016/j.matdes.2016.09.012 ↗
10. Qu S, Huang CX, Gao YL, Yang G, Wu SD, Zang QS, Zhang ZF. Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing. Mater Sci Eng A. 2008;475:207–16.10.1016/j.msea.2007.04.111 ↗
11. Mine Y, Horita Z, Murakami Y. Effect of hydrogen on martensite formation in austenitic stainless steels in high-pressure torsion. Acta Mater. 2009;57:2993–3002.10.1016/j.actamat.2009.03.006 ↗
12. Scheriau S, Zhang Z, Kleber S, Pippan R. Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion. Mater Sci Eng A. 2011;528:2776–86.10.1016/j.msea.2010.12.023 ↗
13. Gubicza J, El-Tahawy M, Huang Y, Choi H, Choe H, Lábár JL, Langdon TG. Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion. Mater Sci Eng A. 2016;657:215–23.10.1016/j.msea.2016.01.057 ↗
14. Nakao Y, Miura H. Nano-grain evolution in austenitic stainless steel during multi-directional forging. Mater Sci Eng A. 2011;528:1310–7.10.1016/j.msea.2010.10.018 ↗
15. Tikhonova M, Belyakov A, Kaibyshev R. Strain-induced grain evolution in an austenitic stainless steel under warm multiple forging. Mater Sci Eng A. 2013;564:413–22.10.1016/j.msea.2012.11.088 ↗
16. Ruppert M, Freund LP, Wenzl T, Höppel HW, Göken M. Ultrafine-grained austenitic stainless steels X4CrNi18-12 and X8CrMnNi19-6-3 produced by accumulative roll bonding. Metals. 2015;5:730–42.10.3390/met5020730 ↗
17. Jafarian H, Borhani E, Shibata A, Tsuji N. Variant selection of martensite transformation from ultrafine-grained austenite in Fe–Ni–C alloy. J Alloy Compd. 2013;577:S668–S67272.10.1016/j.jallcom.2012.04.057 ↗
18. Mohammad Nejad Fard N, Mirzadeh H, Rezayat M, Cabrera JM (2017) Accumulative roll bonding of aluminum/stainless steel sheets. J Ultrafine Grained Nanostructured Mater 50:1–5
19. Cao R, Zhao XK, Ding Y, Zhang XB, Jiang XX, Yan YJ, Chen JH. Effects of the rolling temperature on microstructure and mechanical properties of 2Cr13/316L laminated composites prepared by accumulative roll-bonding (ARB). Mater Charact. 2018;139:153–64.10.1016/j.matchar.2018.03.001 ↗
20. Tsuchiyama T, Uchida H, Kataoka K, Takaki S. Fabrication of fine-grained high nitrogen austenitic steels through mechanical alloying treatment. ISIJ Int. 2002;42:1438–43.10.2355/isijinternational.42.1438 ↗
21. Cisneros MM, Lopez HF, Mancha H, Rincon E, Vazquez D, Perez MJ, De La Torre SD. Processing of nanostructured high nitrogen stainless steel by mechanical alloying. Metall Mater Trans A. 2005;36:1309–16.
22. Amini R, Hadianfard MJ, Salahinejad E, Marasi M, Sritharan T. Microstructural phase evaluation of high-nitrogen Fe–Cr–Mn alloy powders synthesized by the mechanical alloying process. J Mater Sci. 2009;44:136–48.10.1007/s10853-008-3117-9 ↗
23. Haghir T, Abbasi MH, Golozar MA, Panjepour M. Investigation of α to γ transformation in the production of a nanostructured high-nitrogen austenitic stainless steel powder via mechanical alloying. Mater Sci Eng A. 2009;507:144–8.10.1016/j.msea.2008.12.033 ↗
24. Chen YC, Fujii H, Tsumura T, Kitagawa Y, Nakata K, Ikeuchi K, Matsubayashi K, Michishita Y, Fujiya Y, Katoh J. Friction stir processing of 316L stainless steel plate. Sci Technol Weld Join. 2009;14:197–201.10.1179/136217108X386527 ↗
25. Mehranfar M, Dehghani K. Producing nanostructured super-austenitic steels by friction stir processing. Mater Sci Eng A. 2011;528:3404–8.10.1016/j.msea.2011.01.016 ↗
26. Selvam K, Prakash A, Grewal HS, Arora HS. Structural refinement in austenitic stainless steel by submerged friction stir processing. Mater Chem Phys. 2017;197:200–7.10.1016/j.matchemphys.2017.05.034 ↗
27. Cho SH, Yoo YC. Hot rolling simulations of austenitic stainless steel. J Mater Sci. 2001;36:4267–72.10.1023/A:1017949812425 ↗
28. Souza RC, Silva ES, Jorge AM Jr, Cabrera JM, Balancin O. Dynamic recovery and dynamic recrystallization competition on a Nb-and N-bearing austenitic stainless steel biomaterial: influence of strain rate and temperature. Mater Sci Eng A. 2013;582:96–107.10.1016/j.msea.2013.06.037 ↗
29. Zhang XJ, Hodgson PD, Thomson PF. The effect of through-thickness strain distribution on the static recrystallization of hot rolled austenitic stainless steel strip. J Mater Process Technol. 1996;60:615–9.10.1016/0924-0136(96)02395-3 ↗
30. Dehghan-Manshadi A, Barnett MR, Hodgson PD. Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation. Mater Sci Eng A. 2008;485:664–72.10.1016/j.msea.2007.08.026 ↗
31. Zhao J, Jiang Z. Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242.10.1016/j.pmatsci.2018.01.006 ↗
32. Belyakov A, Miura H, Sakai T. Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel. Mater Sci Eng A. 1998;255:139–47.10.1016/S0921-5093(98)00784-9 ↗
33. Mandal S, Bhaduri AK, Sarma VS. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel. Metall Mater Trans A. 2011;42:1062–72.10.1007/s11661-010-0517-7 ↗
34. Salvatori I, Inoue T, Nagai K. Ultrafine grain structure through dynamic recrystallization for Type 304 stainless steel. ISIJ Int. 2002;42:744–50.10.2355/isijinternational.42.744 ↗
35. McQueen HJ, Ryan ND, Evangelista E. Dynamic recrystallization in austenitic stainless steels. Mater Sci Forum. 1993;113:435–40.10.4028/www.scientific.net/MSF.113-115.435 ↗
36. Stewart GR, Jonas JJ, Montheillet F. Kinetics and critical conditions for the initiation of dynamic recrystallization in 304 stainless steel. ISIJ Int. 2004;44:1581–9.10.2355/isijinternational.44.1581 ↗
37. Mirzadeh H, Cabrera JM, Najafizadeh A, Calvillo PR. EBSD study of a hot deformed austenitic stainless steel. Mater Sci Eng A. 2012;538:236–45.10.1016/j.msea.2012.01.037 ↗
38. Barraclough DR, Sellars CM. Static recrystallization and restoration after hot deformation of type 304 stainless steel. Metal Sci. 1979;13:257–68.10.1179/msc.1979.13.3-4.257 ↗
39. Humphreys JF, Rohrer GS, Rollett AD. Recrystallization and related annealing phenomena. 3rd ed. Amsterdam: Elsevier; 2017.
40. Tomimura K, Takaki S, Tanimoto S, Tokunaga Y. Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite. ISIJ Int. 1991;31:721–7.10.2355/isijinternational.31.721 ↗
41. Tomimura K, Takaki S, Tokunaga Y. Reversion mechanism from deformation induced martensite to austenite in metastable austenitic stainless steels. ISIJ Int. 1991;31:1431–7.10.2355/isijinternational.31.1431 ↗
42. Takaki S, Tomimura K, Ueda S. Effect of pre-cold-working on diffusional reversion of deformation induced martensite in metastable austenitic stainless steel. ISIJ Int. 1994;34:522–7.10.2355/isijinternational.34.522 ↗
43. Mangonon PL, Thomas G. Structure and properties of thermal-mechanically treated 304 stainless steel. Metall Trans. 1970;1:1587–94.10.1007/BF02642004 ↗
44. Smith H, West DRF. The reversion of martensite to austenite in certain stainless steels. J Mater Sci. 1973;8:1413–20.10.1007/BF00551664 ↗
45. Guy KB, Butler EP, West DRF. Reversion of bcc α′ martensite in Fe–Cr–Ni austenitic stainless steels. Metal Sci. 1983;17:167–76.10.1179/030634583790420961 ↗
46. Ravi Kumar B, Singh R, Mahato B, De PK, Bandyopadhyay NR, Bhattacharya DK (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Mater Charact 54:141–14710.1016/j.matchar.2004.11.004 ↗
47. Hamada AS, Karjalainen LP, Somani MC. Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution. Mater Sci Eng A. 2006;431:211–7.10.1016/j.msea.2006.05.138 ↗
48. Ferreira Gomes de Abreu H, de Carvalho SS, de Lima Neto P, dos Santos RP, Nogueira Freire V, de Oliveira Silva PM, Souto Maior Tavares S (2007) Deformation induced martensite in an AISI 301LN stainless steel: characterization and influence on pitting corrosion resistance. Mater Res 10:359–36610.1590/S1516-14392007000400007 ↗
49. Solomon N, Solomon I. Effect of deformation-induced phase transformation on AISI 316 stainless steel corrosion resistance. Eng Fail Anal. 2017;79:865–75.10.1016/j.engfailanal.2017.05.031 ↗
50. Tavares SSM, Da Silva MR, Neto JM, Miraglia S, Fruchart D. Ferromagnetic properties of cold rolled AISI 304L steel. J Magn Magn Mater. 2002;242:1391–4.10.1016/S0304-8853(01)01242-2 ↗
51. Mészáros I, Prohászka J. Magnetic investigation of the effect of α′-martensite on the properties of austenitic stainless steel. J Mater Process Technol. 2005;161:162–8.10.1016/j.jmatprotec.2004.07.020 ↗
52. Souza Filho IR, Sandim MJR, Cohen R, Nagamine LCCM, Hoffmann J, Bolmaro RE, Sandim HRZ. Effects of strain-induced martensite and its reversion on the magnetic properties of AISI 201 austenitic stainless steel. J Magn Magn Mater. 2016;419:156–65.10.1016/j.jmmm.2016.06.027 ↗
53. Soleimani M, Kalhor A, Mirzadeh H. Transformation-induced plasticity (TRIP) in advanced steels: a review. Mater Sci Eng A. 2020;795:140023.10.1016/j.msea.2020.140023 ↗
54. Nasiri Z, Ghaemifar S, Naghizadeh M, Mirzadeh H. Thermal mechanisms of grain refinement in steels: a review. Metals Mater Int. 2020. https://doi.org/10.1007/s12540-020-00700-1(inpress).10.1007/s12540-020-00700-1(inpress) ↗
55. Liu J, Jin Y, Fang X, Chen C, Feng Q, Liu X, Chen Y, Suo T, Zhao F, Huang T, Wang H, Wang X, Fang Y, Wei Y, Meng L, Lu J, Yang W. Dislocation strengthening without ductility trade-off in metastable austenitic steels. Sci Rep. 2016;6:35345.10.1038/srep35345 ↗
56. Zergani A, Mirzadeh H, Mahmudi R. Unraveling the effect of deformation temperature on the mechanical behavior and transformation-induced plasticity of the SUS304L stainless steel. Steel Res Int. 2020;91:2000114.10.1002/srin.202000114 ↗
57. Zergani A, Mirzadeh H, Mahmudi R. Evolutions of mechanical properties of AISI 304L stainless steel under shear loading. Mater Sci Eng A. 2020;791:139667.10.1016/j.msea.2020.139667 ↗
58. Gao S, Bai Y, Zheng R, Tian Y, Mao W, Shibata A, Tsuji N. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel. Scripta Mater. 2019;159:28–322.10.1016/j.scriptamat.2018.09.007 ↗
59. Ueji R, Tsuji N, Minamino Y, Koizumi Y. Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite. Acta Mater. 2002;50:4177–89.10.1016/S1359-6454(02)00260-4 ↗
60. Najafi M, Mirzadeh H, Alibeyki M. Toward unraveling the mechanisms responsible for the formation of ultrafine grained microstructure during tempering of cold rolled martensite. Mater Sci Eng A. 2016;670:252–5.10.1016/j.msea.2016.06.024 ↗
61. Kalhor A, Soleimani M, Mirzadeh H, Uthaisangsuk V. A review of recent progress in mechanical and corrosion properties of dual phase steels. Arch Civil Mech Eng. 2020;20:85.10.1007/s43452-020-00088-0 ↗
62. Azizi-Alizamini H, Militzer M, Poole WJ. Formation of ultrafine grained dual phase steels through rapid heating. ISIJ Int. 2011;51:958–64.10.2355/isijinternational.51.958 ↗
63. Nikkhah S, Mirzadeh H, Zamani M. Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing. Mater Chem Phys. 2019;230:1–8.10.1016/j.matchemphys.2019.03.053 ↗
64. Nakada N, Arakawa Y, Park KS, Tsuchiyama T, Takaki S. Dual phase structure formed by partial reversion of cold-deformed martensite. Mater Sci Eng A. 2012;553:128–33.10.1016/j.msea.2012.06.001 ↗
65. Deng Y, Di H, Misra RDK. On significance of initial microstructure in governing mechanical behavior and fracture of dual-phase steels. J Iron Steel Res Int. 2018;25:932–42.10.1007/s42243-018-0133-0 ↗
66. Tamura I. Deformation-induced martensitic transformation and transformation-induced plasticity in steels. Metal Sci. 1982;16:245–53.10.1179/030634582790427316 ↗
67. Patel JR, Cohen M. Criterion for the action of applied stress in the martensitic transformation. Acta Metall. 1953;1:531–8.10.1016/0001-6160(53)90083-2 ↗
68. Bolling GF, Richman RH. The plastic deformation-transformation of paramagnetic fcc Fe–Ni–C alloys. Acta Metall. 1970;18:673–81.10.1016/0001-6160(70)90097-0 ↗
69. Olson GB, Cohen M. A mechanism for the strain-induced nucleation of martensitic transformations. J Less Common Metals. 1972;28:107–18.10.1016/0022-5088(72)90173-7 ↗
70. Das A, Sivaprasad S, Ghosh M, Chakraborti PC, Tarafder S. Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Mater Sci Eng A. 2008;486:283–6.10.1016/j.msea.2007.09.005 ↗
71. Venables JA. The martensite transformation in stainless steel. Philos Mag J Theor Exp Appl Phys. 1962;7:35–44.
72. Mangonon PL, Thomas G. The martensite phases in 304 stainless steel. Metall Trans. 1970;1:1577–86.10.1007/BF02642003 ↗
73. Suzuki T, Kojima H, Suzuki K, Hashimoto T, Ichihara M. An experimental study of the martensite nucleation and growth in 18/8 stainless steel. Acta Metall. 1977;25:1151–62.10.1016/0001-6160(77)90202-4 ↗
74. De AK, Speer JG, Matlock DK, Murdock DC, Mataya MC, Comstock RJ. Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel. Metall Mater Trans A. 2006;37:1875–86.10.1007/s11661-006-0130-y ↗
75. Shirdel M, Mirzadeh H, Parsa MH. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect. Mater Charact. 2015;103:150–61.10.1016/j.matchar.2015.03.031 ↗
76. Shen YF, Li XX, Sun X, Wang YD, Zuo L. Twinning and martensite in a 304 austenitic stainless steel. Mater Sci Eng A. 2012;552:514–22.10.1016/j.msea.2012.05.080 ↗
77. Sohrabi MJ, Mirzadeh H, Dehghanian C. Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel. Vacuum. 2020;174:109220.10.1016/j.vacuum.2020.109220 ↗
78. De AK, Murdock DC, Mataya MC, Speer JG, Matlock DK. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scripta Mater. 2004;50(12):1445–9.10.1016/j.scriptamat.2004.03.011 ↗
79. Moser NH, Gross TS, Korkolis YP. Martensite formation in conventional and isothermal tension of 304 austenitic stainless steel measured by X-ray diffraction. Metall Mater Trans A. 2014;45:4891–6.10.1007/s11661-014-2422-y ↗
80. Gauss C, Souza Filho IR, Sandim MJR, Suzuki PA, Ramirez AJ, Sandim HRZ. In situ synchrotron X-ray evaluation of strain-induced martensite in AISI 201 austenitic stainless steel during tensile testing. Mater Sci Eng A. 2016;651:507–16.10.1016/j.msea.2015.10.110 ↗
81. Solomon N, Solomon I. Deformation induced martensite in AISI 316 stainless steel. Rev de Metal. 2010;46:121–8.10.3989/revmetalm.0920 ↗
82. Haušild P, Davydov V, Drahokoupil J, Landa M, Pilvin P. Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel. Mater Des. 2010;31:1821–7.10.1016/j.matdes.2009.11.008 ↗
83. Polatidis E, Morgano M, Malamud F, Bacak M, Panzner T, Van Swygenhoven H, Strobl M. Neutron diffraction and diffraction contrast imaging for mapping the TRIP effect under load path change. Materials. 2020;13:1450.10.3390/ma13061450 ↗
84. Souza Filho IR, Zilnyk KD, Sandim MJR, Bolmaro RE, Sandim HRZ. Strain partitioning and texture evolution during cold rolling of AISI 201 austenitic stainless steel. Mater Sci Eng A. 2017;702:161–72.10.1016/j.msea.2017.07.010 ↗
85. Kisko A, Misra RDK, Talonen J, Karjalainen LP. The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr–9Mn–Ni–Cu stainless steel. Mater Sci Eng A. 2013;578:408–16.10.1016/j.msea.2013.04.107 ↗
86. Al-Fadhalah K, Aleem M. Microstructure refinement and mechanical properties of 304 stainless steel by repetitive thermomechanical processing. Metall Mater Trans A. 2018;49:1121–39.10.1007/s11661-018-4475-9 ↗
87. Li J, Fang C, Liu Y, Huang Z, Wang S, Mao Q, Li Y. Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure. Mater Sci Eng A. 2019;742:409–13.10.1016/j.msea.2018.11.047 ↗
88. Gauzzi F, Verdini B. Martensitic transformations in Fe–Mn–C system. Metall Italy. 1979;71:515–30.
89. Shirdel M, Mirzadeh H, Parsa MH. Estimation of the kinetics of martensitic transformation in austenitic stainless steels by conventional and novel approaches. Mater Sci Eng A. 2015;624:256–60.10.1016/j.msea.2014.11.087 ↗
90. Tavares SSM, Neto JM, Da Silva MR, Vasconcelos IF, de Abreu HFG. Magnetic properties and α′ martensite quantification in an AISI 301LN stainless steel deformed by cold rolling. Mater Charact. 2008;59:901–4.10.1016/j.matchar.2007.07.007 ↗
91. Lois A, Ruch M. Assessment of martensite content in austenitic stainless steel specimens by eddy current testing. Insight Non Destr Test Cond Monit. 2006;48:26–9.10.1784/insi.2006.48.1.26 ↗
92. Beese AM, Mohr D. Identification of the direction-dependency of the martensitic transformation in stainless steel using in situ magnetic permeability measurements. Exp Mech. 2011;51:667–76.10.1007/s11340-010-9374-y ↗
93. Mumtaz K, Takahashi S, Echigoya J, Zhang LF, Kamada Y, Sato M. Detection of martensite transformation in high temperature compressively deformed austenitic stainless steel by magnetic NDE technique. J Mater Sci. 2003;38:3037–50.10.1023/A:1024744307549 ↗
94. O'sullivan D, Cotterell M, Meszaros I (2004) The characterisation of work-hardened austenitic stainless steel by NDT micro-magnetic techniques. NDT E Int 37:265–26910.1016/j.ndteint.2003.10.001 ↗
95. Klyushnikov VA, Gonchar AV, Mishakin VV, Kurashkin KV. Measurement of the strain induced α’-martensite content by eddy current method in the presence of elastic stresses of austenitic stainless steels. J Phys Conf Ser. 2020;1431:012028.10.1088/1742-6596/1431/1/012028 ↗
96. Talonen J, Aspegren P, Hänninen H. Comparison of different methods for measuring strain induced α-martensite content in austenitic steels. Mater Sci Technol. 2004;20:1506–12.10.1179/026708304X4367 ↗
97. Mukhopadhyay CK, Jayakumar T, Kasiviswanathan K, Raj B. Study of ageing-induced α′-martensite formation in cold-worked AISI type 304 stainless steel using an acoustic emission technique. J Mater Sci. 1995;30:4556–600.10.1007/BF01153062 ↗
98. Celada-Casero C, Kooiker H, Groen M, Post J, San-Martin D. In-situ investigation of strain-induced martensitic transformation kinetics in an austenitic stainless steel by inductive measurements. Metals. 2017;7:271.10.3390/met7070271 ↗
99. Haušild P, Nohava J, Pilvin P. Characterisation of strain-induced martensite in a metastable austenitic stainless steel by nanoindentation. Strain. 2011;47:129–33.10.1111/j.1475-1305.2010.00748.x ↗
100. Gauzzi F, Verdini B, Principi G, Badan B. The martensitic transformation in cold-worked Fe-Mn alloys studied by Mössbauer spectroscopy. J Mater Sci. 1983;18:3661–700.10.1007/BF00540738 ↗