Design and fabrication of conductive nanofibrous scaffolds for neural tissue engineering: Process modeling via response surface methodology

Peripheral nervous system in contrary to central one has the potential for regeneration, but its regrowth requires proper environmental conditions and supporting growth factors. The aim of this study is to design and fabricate a conductive polyaniline/graphene nanoparticles incorporated gelatin nanofibrous scaffolds suitable for peripheral nervous system regeneration. The scaffolds were fabricated with electrospinning and the fabrication process was designed with Design-Expert software via response surface methodology. The effect of process parameters including applied voltage (kV), syringe pump flow rate (cm ³ /h), and PAG concentration (wt%), on the scaffold conductivity, nanofibers diameter, and cell viability were investigated. The obtained results showed that the scaffold conductivity and cell viability are affected by polyaniline/graphene concentration while nanofiber diameter is more affected by the applied voltage and syringe pump flow rate. Optimum scaffold with maximum conductivity (0.031 ± 0.0013 S/cm) and cell compatibility and suitable diameter were electrospun according to the software introduced values for the process parameters (voltage of 13 kV, flow rate of 0.1 cm ³ /h, and PAG wt.% of 1.3) and its morphology, cell compatibility, and biodegradability were further investigated, which showed its potential for applying in peripheral nervous system injury regeneration.