Microstructures and properties of microporous magnesia aggregates from Mg(OH) 2 and magnesite
Source abstract
Abstract
Microporous MgO refractory aggregates were prepared with Mg(OH)2 and magnesite by the in-situ decomposition method, and the influence of magnesite content on the microstructures and properties of the aggregates was investigated. The results indicated that a large amount of nanopores generated in the aggregates without magnesite due to Mg(OH)2 decomposition, but few neck connections among MgO particles. Some impurities in appropriate magnesite leading to liquid-phase sintering promoted the formation of neck connections and thus improved the strength and thermal shock resistance. However, excessive introduction of magnesite resulted in the enlargement of the pores and the increase of porosity and then deteriorated the properties of the aggregates. The sample with 15 wt.% magnesite content exhibited the best comprehensive properties, with a bulk density of 2.82 g/cm3, a median pore size of 2.45 um, a compressive strength of 68.2 MPa, a high thermal shock resistance and a relatively low thermal conductivity of 5.76 W/(m K) at 800 ℃.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wuhan University of Science and Technology
Qinghai University
Technische Universität Bergakademie Freiberg
Funding
Key Projects of the National Natural Science Foundation of China · Research Project of Hubei Provincial Department of Science and Technology
References (47)
Show source-provided references
1. 10.1007/s12034-014-0837-010.1007/s12034-014-0837-0 ↗
2. 10.1111/jace.1713710.1111/jace.17137 ↗
3. 10.1016/j.ceramint.2020.01.12710.1016/j.ceramint.2020.01.127 ↗
4. 10.1016/j.jeurceramsoc.2013.07.00110.1016/j.jeurceramsoc.2013.07.001 ↗
5. 10.1111/jace.1684110.1111/jace.16841 ↗
6. 10.1016/j.corsci.2020.10851710.1016/j.corsci.2020.108517 ↗
7. 10.1111/ijac.1267110.1111/ijac.12671 ↗
8. 10.1016/j.ceramint.2014.01.01010.1016/j.ceramint.2014.01.010 ↗
9. 10.2298/TSCI181223193W10.2298/TSCI181223193W ↗
10. 10.1016/j.ceramint.2014.10.11210.1016/j.ceramint.2014.10.112 ↗
11. 10.1016/j.ceramint.2023.08.24110.1016/j.ceramint.2023.08.241 ↗
12. 10.1016/j.jeurceramsoc.2021.11.01910.1016/j.jeurceramsoc.2021.11.019 ↗
13. 10.1016/j.matdes.2019.10832610.1016/j.matdes.2019.108326 ↗
14. 10.1016/j.jallcom.2023.17061110.1016/j.jallcom.2023.170611 ↗
15. 10.1016/j.conbuildmat.2021.12338810.1016/j.conbuildmat.2021.123388 ↗
16. 10.1016/j.ceramint.2021.09.14010.1016/j.ceramint.2021.09.140 ↗
17. 10.1016/j.jeurceramsoc.2022.09.01910.1016/j.jeurceramsoc.2022.09.019 ↗
18. 10.1111/ijac.1412310.1111/ijac.14123 ↗
19. 10.1016/j.jallcom.2019.05.06410.1016/j.jallcom.2019.05.064 ↗
20. 10.1016/j.ceramint.2021.07.28710.1016/j.ceramint.2021.07.287 ↗
21. 10.1016/j.ceramint.2020.12.22910.1016/j.ceramint.2020.12.229 ↗
22. 10.1111/jace.1868310.1111/jace.18683 ↗
23. 10.1016/j.ceramint.2016.08.14510.1016/j.ceramint.2016.08.145 ↗
24. 10.1016/j.matlet.2011.09.09210.1016/j.matlet.2011.09.092 ↗
25. 10.1016/j.ceramint.2022.03.12110.1016/j.ceramint.2022.03.121 ↗
26. 10.1016/j.jeurceramsoc.2023.06.07510.1016/j.jeurceramsoc.2023.06.075 ↗
27. 10.1016/j.jeurceramsoc.2023.01.02310.1016/j.jeurceramsoc.2023.01.023 ↗
28. Fu S, Li P, Feng Q, et al. Research advances in soft magnesium pollution of magnesite mining area and related mechanisms. Chin J Ecol. 2009;28(3):549–555. Available from: https://www.cje.net.cn/EN/Y2009/V28/I03/549
29. 10.1007/s00128-015-1530-810.1007/s00128-015-1530-8 ↗
30. 10.1016/j.minpro.2015.09.00610.1016/j.minpro.2015.09.006 ↗
31. 10.1016/j.conbuildmat.2024.13800810.1016/j.conbuildmat.2024.138008 ↗
32. Chen Q, Yan W, Wang X. Synthesis of porous magnesia based composite spinel (Mg(Fe, Al)2O4) refractory aggregates. J Chin Ceram Soc. 2023;51(3):571–578. Available from: http://www.gxyb.cbpt.cnki.net
33. 10.1016/j.ceramint.2023.08.01710.1016/j.ceramint.2023.08.017 ↗
34. Jin Q. Research on the application of deep brine mining technology in Chaerhan Salt Lake. J Salt Sci Chem Ind. 2024;53(5):21–24. Available from: https://link.cnki.net/doi/10.16570/j.cnki.issn1673-6850.2024.05.014
35. Bai Y, Wang S, Guo S, et al. Utilization and research status of Salt Lake resources in Qaidam Basin, Qinghai. J Salt Sci Chem Ind. 2023;52(3):1–6. Available from: https://link.cnki.net/doi/10.16570/j.cnki.issn1673-6850.2023.03.006
36. 10.1016/j.jeurceramsoc.2023.04.04310.1016/j.jeurceramsoc.2023.04.043 ↗
37. 10.1016/j.jeurceramsoc.2023.02.01510.1016/j.jeurceramsoc.2023.02.015 ↗
38. 10.1080/21870764.2023.219682510.1080/21870764.2023.2196825 ↗
39. German RM. Sintering theory and practice. Hoboken, NJ: Wiley-Interscience; 1996.
40. 10.1016/j.jeurceramsoc.2024.11677210.1016/j.jeurceramsoc.2024.116772 ↗
41. 10.2298/PAC2003268Z10.2298/PAC2003268Z ↗
42. 10.1111/ijac.1462710.1111/ijac.14627 ↗
43. 10.1016/j.ceramint.2019.05.28410.1016/j.ceramint.2019.05.284 ↗
44. 10.1111/j.1151-2916.1968.tb15680.x10.1111/j.1151-2916.1968.tb15680.x ↗
45. Han B, Nie J, Li S. Fundamentals of inorganic materials science. Beijing: Chemical Industry Press; 2022.
46. Li N, Gu H, Zhao H. Refractories fundamental and technology. Beijing: Metallurgical Industry Press; 2010.
47. 10.1016/j.ceramint.2020.06.20010.1016/j.ceramint.2020.06.200 ↗