Influence of Reinforcing Rebar on Expansion due to Delayed Ettringite Formation along the Bonding Length – Part II: Bond Performance of Reinforced Concrete Affected by DEF Expansion
Source abstract
Abstract
The purpose of this study is to clarify the bond behavior between rebar and concrete during DEF expansion and pullout testing. The details of the expansion test and the influence of reinforcing bar on DEF expansion have been precisely described in Part I. In Part II, the data related to the bond test is described. The change in bond behavior due to DEF expansion is investigated via the one-end pullout test and the influence of DEF expansion on the bond behavior is discussed. The local bond behavior (slip and bond stress) during the pullout test of the specimens without stirrups is observed to be dramatically changed by DEF expansion. Regarding the specimens with stirrups, failure did not occur during the pullout test and the local bond behavior slightly changed as in the case without stirrups. From the experimental results, a conceptual diagram is proposed to explain the bond behavior during DEF expansion and the pullout test based on the general conceptual understanding of the bond. It can be considered that the direction of local slip and local bond stress during the pullout test is opposite to that during the expansion process. This results in the observed complex local bond behavior during DEF expansion and the pullout test and the effect of stirrups on DEF expansion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan.
Structural Engineering Department, Port and Airport Research Institute, 3-1-1, Yokosuka 239-0826, Japan.
Université de Toulouse, INSA/UPS Génie Civil, 135 Avenue de Rangueil, 31077 Toulouse Cedex 04, France.
Univ Gustave Eiffel, MAST-EMGCU, F-77454 Marne-la-Vallée, France.
Department of Civil, Environmental and Applied Systems Engineering, Kansai University, 3-3-35, Yamate-cho, Suita, Osaka 564-8680, Japan.
Department of Civil Engineering, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan.
Graduate School of Science and Engineering, Saitama University, 255 Shimo-Okubo Sakura-ku, Saitama 338-8570, Japan.
References (50)
Show source-provided references
1. 1) ACI, (2019). “Building code requirements for structural concrete (ACI 318-19).” Farmington Hills, Michigan: American Concrete Institute.
2. 2) Ahmed, T., Burley, E. and Rigden, S., (1998). “The static and fatigue strength of reinforced concrete beams affected by alkali-silica reaction.” ACI Materials Journal, 95(4), 376-388.10.14359/380 ↗
3. 3) Almusallam, A. A., Al-Gahtani, A. S., Aziz, A. R. and Rasheeduzzafar., (1996). “Effect of reinforcement corrosion on bond strength.” Construction and Building Materials, 10, 123-129.10.1016/0950-0618(95)00077-1 ↗
4. 4) Al-Sulaiman, G. J., Kaleemullah, M., Basunbul, I. A. and Rasheeduzzafar., (1990). “Influence of corrosion and cracking on bond behaviour and strength of reinforced concrete members.” ACI Structural Journal, 87, 220-231.10.14359/2732 ↗
5. 5) Aryan, H. and Gencturk, B., (2021). “Influence of alkali-silica reaction on the shear capacity of reinforced concrete beams with minimum transverse reinforcement.” Engineering Structures, 235(15), 112020.10.1016/j.engstruct.2021.112020 ↗
6. 6) Bach, F., Thorsen, T. S. and Nielsen, M. P., (1993). “Load-carrying capacity of structural members subjected to alkali-silica reactions.” Construction and Building Materials, 7(2), 109-115.10.1016/0950-0618(93)90040-J ↗
7. 7) Barbosa, R. A., Hansen, S. G., Hoang, L. C. and Hansen, K. K., (2018). “Residual shear strength of a severely ASR-damaged flat slab bridge.” Engineering Structures, 161(15), 82-95.10.1016/j.engstruct.2018.01.056 ↗
8. 8) Bhargava, K., Ghosh, A. K., Mori, Y. and Ramanujam, S., (2007). “Corrosion-induced bond strength degradation in reinforced concrete - Analytical and empirical models.” Nuclear Engineering and Design, 237, 1140-1157.10.1016/j.nucengdes.2007.01.010 ↗
9. 9) Cabrera, J. G., (1996). “Deterioration of concrete due to reinforcement steel corrosion.” Cement and Concrete Composites, 18, 47-59.10.1016/0958-9465(95)00043-7 ↗
10. 10) Clark, L. A., (1990). “Structural aspects of alkali-silica reaction.” Structural Engineering Review, 2(2), 81-87.
11. 11) Diamond, S., (1996). “Delayed ettringite formation - Process and problems.” Cement and Concrete Composites, 18, 205-215.10.1016/0958-9465(96)00017-0 ↗
12. 12) Fan, S. and Hanson, J. M., (1998). “Effect of alkali silica reaction expansion and cracking on structural behavior of reinforced concrete beams.” ACI Structural Journal, 95(5), 498-505.10.14359/564 ↗
13. 13) Fang, C., Lundgren, K., Chen, L. and Zhu, C., (2004). “Corrosion influence on bond in reinforced concrete.” Cement and Concrete Research, 34, 2159-2167.10.1016/j.cemconres.2004.04.006 ↗
14. 14) Ferche, A. C. and Vecchio, F. J., (2021). “Behavior of alkali-silica reaction-affected reinforced concrete elements subjected to shear.” ACI Materials Journal, 116(6), 179-191.
15. 15) fib, (2010). “CEB-FIP model code 2010, First complete draft, Vol. 1.” Lausanne: Fédération Internationale du Béton (fib).
16. 16) Godart, B., (2017). “Pathology, assessment and treatment of structures affected by delayed ettringite formation.” Structural Engineering International, 27(3), 362-369.10.2749/101686617X14881932436771 ↗
17. 17) Godart, B. and Divet, L., (2013). “Lessons learned from structures damaged by delayed ettringite formation and the French prevention strategy.” In: J. Carpenter, Ed. Proc. 5th International Conference on Forensic Engineering, London 16-17 April 2013. London: The Institution of Civil Engineers.
18. 18) GOM, (2020). “Image analyzing software: GOM Correlate [online].” North Carolina, USA. GOM Americas Inc. Available from: .
19. 19) Habibi, F., Sheikh, S. A., Vecchio, F. and Panesar, D. K., (2018). “Effects of alkali-silica reaction on concrete squat shear walls.” ACI Structural Journal, 115(5), 1329-1339.10.14359/51702238 ↗
20. 20) Haddad, R. H. and Numayr, K. S., (2007). “Effect of alkali-silica reaction and freezing and thawing action on concrete-steel bond.” Construction and Building Materials, 21, 428-435.10.1016/j.conbuildmat.2005.07.012 ↗
21. 21) Jabbour, J., Darquennes, A., Divet, L., Bennacer, R., Torrenti, J.-M. and Nahas, G., (2021). “New experimental approach to accelerate the development of internal swelling reactions (ISR) in massive concrete structures.” Construction and Building Materials, 313, 125388.10.1016/j.conbuildmat.2021.125388 ↗
22. 22) JSCE, (2012). “Standard specifications for structures-2012, Design.” Tokyo: Japan Society of Civil Engineers, Japan.
23. 23) Kawabata, Y., Miura, T., Fujishima, M., Ueda, N., Takahashi, Y., Asamoto, S., Multon, S., Martin, R.-P. and Seignol J.-F., (2023). “Influence of reinforcing rebar on expansion due to delayed ettringite formation along the bonding length. Part I: The effect of reinforcing bar on the expansive behavior of concrete.” Journal of Advanced Concrete Technology, 21(11), 851-869.10.3151/jact.21.851 ↗
24. 24) Koyanagi, W., Rokugo, K. and Ishida, H., (1986). “Failure behavior of reinforced concrete beams deteriorated by alkali-silica reactions.” In: P. E. Grattan-Bellew, Ed. Proc. 7th International Conference on Alkali-Aggregate Reaction in Concrete, Ottawa 18-24 May 1986. Park Ridge, New Jersey: Noyes Publications, 141-145.
25. 25) Law, D. W., Tang, D., Molyneaux, T. K. C. and Gravina, R., (2011). “Impact of crack width on bond: confined and unconfined rebar.” Materials and Structures, 44, 1287-1296.10.1617/s11527-010-9700-y ↗
26. 26) Lee, H. S., Noguchi, T. and Tomosawa, F., (2002). “Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion.” Cement and Concrete Research, 32, 1313-1318.10.1016/S0008-8846(02)00783-4 ↗
27. 27) Li, P., Tan, N., An, X., Maekawa, K. and Jiang, Z., (2020). “Restraint effect of reinforcing bar on ASR expansion and deterioration characteristics of the bond behavior.” Journal of Advanced Concrete Technology, 18(4), 192-210.10.3151/jact.18.192 ↗
28. 28) Li, P., Tan, N., An, X., Maekawa, K. and Ren, M., (2022). “Effect of multi-directional restraint induced by reinforced steel bars on ASR expansion and bond performance.” Journal of Advanced Concrete Technology, 20(4), 342-358.10.3151/jact.20.342 ↗
29. 29) Marchand, P., Baby, F., Khadour, A., Battesti, T., Rivillon, P., Quiertant, M., Nguyen, H.-H., Généreux, G., Deveaud, J.-P., Simon, A. and Toutlemonde, F., (2016). “Bond behaviour of reinforcing bars in UHPFRC.” Materials and Structures, 49, 1979-1995.10.1617/s11527-015-0628-0 ↗
30. 30) Martin, R.-P., Renaud, J.-C., Multon, S. and Toutlemonde, F., (2012). “Structural behavior of plain and reinforced concrete beams affected by combined AAR and DEF.” In: Proc. 14th International Conference on Alkali-Aggregate Reaction in Concrete, Austin, Texas 20-25 May 2012. Austin: University of Texas at Austin, Paper No. 021411.
31. 31) Miura, T., Sato, K., Fujishima, M., Nakamura, H. and Kawabata, Y., (2022). “Mechanism for reduction in compressive properties of cementitious materials in relation to internal crack patterns due to ASR and DEF expansion.” Cement and Concrete Composites, 128, 104441.10.1016/j.cemconcomp.2022.104441 ↗
32. 32) Monette, L. J., Gardner, N. J. and Grattan-Bellew P. E., (2002). “Residual strength of reinforced concrete beams damaged by alkali-silica reaction - Examination of damage rating index method.” ACI Materials Journal, 99(1), 42-50.10.14359/11315 ↗
33. 33) Morenon, P., Multon, S., Sellier, A., Grimal, E., Hamon, F. and Kolmayer P., (2019). “Flexural performance of reinforced concrete beams damaged by alkali-silica reaction.” Cement and Concrete Composites, 104, 103412.10.1016/j.cemconcomp.2019.103412 ↗
34. 34) Multon, S., Seignol, J.-F. and Toutlemonde, F., (2005). “Structural behavior of concrete beams affected by alkali-silica reaction.” ACI Materials Journal, 102(2), 67-76.10.14359/14299 ↗
35. 35) Oberholster, R. E., Maree, H. and Brand, J. H. B., (1992). “Cracked prestressed concrete railway sleepers: Alkali-silica reaction or delayed ettringite formation.” In: A. B. Poole, Ed. Proc. 9th International Conference on Alkali-Aggregate Reaction in Concrete, London 27-31 July 1992. Slough, Berkshire: The Concrete Society, 739-749.
36. 36) Sahu, S. and Thaulow, N., (2004). “Delayed ettringite formation in Swedish concrete railroad ties.” Cement and Concrete Research, 34, 1675-1681.10.1016/j.cemconres.2004.01.027 ↗
37. 37) Santos Silva, A., Gonçalves, A. F. and Pipa, M., (2008). “Diagnosis and prognosis of Portuguese concrete railway sleepers degradation - A combination of ASR and DEF.” In: M. A. T. M. Broekmans and B. J. Wigum, Eds. Proc. 13th International Conference on Alkali-Aggregate Reaction in Concrete, Trondheim, Norway 16-20 June 2008. Trondheim: Norwegian University for Science and Technology, 1240-1249.
38. 38) Sawada, S., Takaine, Y., Okayasu, T., Nimura, A. and Shimamoto, R., (2021). “Structural performance evaluation and monitoring of reinforced concrete shear walls affected by alkali-silica reactions.” Journal of Advanced Concrete Technology, 19(5), 477-500.10.3151/jact.19.477 ↗
39. 39) Shima, H., Chou, L. and Okamura, H., (1998). “Micro and macro models for bond behavior in reinforced concrete, Journal of the Faculty of Engineering, University of Tokyo.” 39(2), 133-194.
40. 40) Somayaji, S. and Shah, S. P., (1981). “Bond stress versus slip relationship and cracking response of tension members.” ACI Journal Proceedings, 78, 217-225.10.14359/6920 ↗
41. 41) Stanish, K., Hooton, R. D. and Pantazopoulou, S. J., (1999). “Corrosion effects on bond strength in reinforced concrete.” ACI Structural Journal, 96, 915-921.10.14359/765 ↗
42. 42) Swamy, R. N. and Al-Asali, M. M., (1989). “Effect of alkali-silica reaction on the structural behavior of reinforced concrete beams.” ACI Structural Journal, 86(4), 451-459.10.14359/2961 ↗
43. 43) Taylor, H. F. W., Famy, C. and Scrivener, K. L., (2001). “Delayed ettringite formation.” Cement and Concrete Research, 31, 683-693.10.1016/S0008-8846(01)00466-5 ↗
44. 44) Thiebaut, Y., (2018). “Evaluation des structures en béton armé atteintes de réaction sulfatique interne.” Thesis (PhD). L’Université de Toulouse. (in French)
45. 45) Thomas, M., Folliard, K., Drimalas, T. and Tamlochan, T., (2008). “Diagnosing delayed ettringite formation in concrete structures.” Cement and Concrete Research, 38, 841-847.10.1016/j.cemconres.2008.01.003 ↗
46. 46) Usman, F., Nakamura, H. and Miura, T., (2021). “Bond behavior evaluation of deformed rebar dependent on lateral pressure confinement including various structural parameters.” Cement and Concrete Composites, 119, 103996.10.1016/j.cemconcomp.2021.103996 ↗
47. 47) Villemure, F. A., Fiset, M., Bastien, J., Mitchell, D. and Fournier, B., (2019). “Behavior of epoxy bonded bars in concrete affected by alkali-silica reaction.” ACI Materials Journal, 116, 179-191.10.14359/51719069 ↗
48. 48) Wang, X. and Liu, X., (2004). “Modeling bond strength of corroded reinforcement without stirrups.” Cement and Concrete Research, 34, 1331-1339.10.1016/j.cemconres.2003.12.028 ↗
49. 49) Yang, Y., Nakamura, H., Miura, T. and Yamamoto, Y., (2019). “Effect of corrosion-induced crack and corroded rebar shape on bond behavior.” Structural Concrete, 20, 2171-2193.10.1002/suco.201800313 ↗
50. 50) Zhychkovska, O. and Sheikh, S., (2021). “Bond and anchorage behavior of alkali-silica reactive concrete.” ACI Structural Journal, 118, 279-293.10.14359/51730533 ↗