Shear Mechanism of Reinforced Concrete T-Beams with Stirrups
Source abstract
Abstract
As is well known, in the current design code, the shear strength of beams can be calculated based on the modified truss theory, which cannot take into account the effects of the top flange area of T-beams. Reported experimental data show that the top flange has an effect on the shear capacity of T-beams with shear reinforcement. To predict the shear capacity of T-beams more precisely, the effect of the concrete top flange area on the shear resisting mechanism must be clarified. Comparison of test results for rectangular and T-beams yielded insights into the shear resisting mechanism of T-beams. Verification and clarification of the shear resisting mechanism of T-beams were performed based on the 3D nonlinear finite element code (CAMUI). Finally, a simplified method for determining the failure criteria for shear of RC T-beams is proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Built Environment, Hokkaido University, Japan.
References (25)
Show source-provided references
1. ACI Committee 318, (1999). “Building code requirements for structural concrete (318M-99) and commentary (318RM-99).” American Concrete Institute, Michigan.
2. Al-Alusi, A. F. (1957). “Diagonal tension strength of reinforced concrete T-beams with varying shear span.” ACI Journal, 53(5), 1067-1077.
3. Bresler, B. and Macgregor J. G. (1967). “Review of concrete beams failing in shear.” ASCE Journal of the Structural Division, 93(1), 343-372.10.1061/JSDEAG.0001586 ↗
4. Collins, M. P., Mitchell, D. and Macgregor, J. G. (1993). “Structural design considerations for high-strength concrete.” Concrete International, 15(13), 27-34.
5. Collins, M. P., Mitchell, D., Adebar, P. and Vecchio, F. J. (1996). “A general shear design method.” ACI Structural Journal, 93(1), 36-45.
6. Eurocode 2, (1992). “Design of concrete structures.” European Prestandard ENV 1992-1-1.
7. Ferguson, P. M. and Thompson, J. N. (1953). “Diagonal tension in T-beams without stirrups.” ACI Journal, 49(3), 665-675.
8. Hoang, L. C. (1997). “Shear strength of non-shear reinforced concrete elements, part 2 - T-beams.” Technical University of Denmark, Department of Structural Engineering and Materials, Report No. 29, Lyngby.
9. JSCE (2002). “Standard Specifications for Concrete Structures - Structural Performance Verification.” Tokyo, Japan.
10. Leonhardt, F. (1965). “Reducing the shear reinforcement in reinforced concrete beams and slabs.” Magazine of Concrete Research, 17(53), 187-198.10.1680/macr.1965.17.53.187 ↗
11. Li, B., Maekawa, K. and Okamura, H. (1998). “Contact density model for stress transfer across crack in concrete.” Journal of the Faculty of Engineering, University of Tokyo (B), 40(1), 9-52.
12. Maekawa, K., Takemura, J., Irawan, P. and Irie, M. (1993). “Triaxial elasto-plastic and fracture model for concrete.” JSCE Journal of Materials, Concrete Structures and Pavements, 18(460), 131-138.
13. Moayer, M. and Regan, P. E. (1974). “Shear strength of prestressed and reinforced concrete T-beams.” Shear in Reinforced Concrete, ACI Special Publication 42, 1, 183-213.
14. Nakamura, H. and Higai, T. (1999). “Compressive fracture energy and fracture zone length of concrete.” Seminar on post-peak behavior of RC structures subjected to seismic loads JCI, 2, 259-272.
15. Pansuk, W., Sato, Y., Ueda, T. and Takahashi, R. (2004). “Investigation on shear capacity of reinforced concrete T-beams using 3D nonlinear finite element analysis.” JSCE Journal of Structural Engineering, 50(A), 991-998.
16. Pansuk, W., Sato, Y., Shionaga, R. and Walraven, J. C. (2006). “FE analysis of ultra high performance fiber reinforced concrete.&rdquo
17. EURO-C 2006 Computational Modelling of Concrete Structures, Mayrhofen 27-30 March 2006, Great-Britain: A.A. Balkema Publishers, 397-404.
18. Pimanmas, A. and Maekawa, K. (2001). “Influence of pre-crack on RC behavior in shear.” JSCE Journal of Materials, Concrete Structures and Pavements, 50(669), 277-291.
19. Placas, A. and Regan P. E. (1971). “Shear failure of reinforced concrete beams.” ACI Journal, 68, 763-774.
20. Regan, P. E. and Placas, A. (1970). “Limit-stage design for shear in rectangular and T beams.” Magazine of Concrete Research, 22(73), 197-208.10.1680/macr.1970.22.73.197 ↗
21. Reinhardt, H. W., Cornelissen, H. A. and Hordijk, D. A. (1986). “Tensile tests and failure analysis of concrete.” ASCE Journal of Structural Engineering, 112(11), 2462-2477.10.1061/(ASCE)0733-9445(1986)112:11(2462) ↗
22. Sato, Y., Tadokoro, T. and Ueda, T. (2004). “Diagonal tensile failure mechanism of reinforced concrete beams.” Journal of Advanced Concrete Technology, 2(3), 327-341.10.3151/jact.2.327 ↗
23. Takahashi, R., Sato, Y., Konno, K. and Ueda, T. (2005). “3D nonlinear punching shear simulation of steel-concrete composite slab.” Journal of Advanced Concrete Technology, 3(2), 297-307.10.3151/jact.3.297 ↗
24. Taub, J. and Neville, A. M. (1960). “Resistance to shear of reinforced concrete beams Part 2-Beams with vertical stirrups.” ACI Journal, 57, 315-336.
25. Withey, M. O., (1908). “Tests of plain and reinforced concrete: Series of 1907.” Bulletin of the University of Wisconsin, Engineering Series, 4 (2), 1-66.