Impact of Aggregate Physical Properties on the Compressive Strength of Concrete
Source abstract
Abstract
Understanding the role of aggregates in the compressive strength of brittle composites is crucial for optimizing construction material usage. In this study, we employed the rigid-body-spring-network model validated with experimental data. Through uniaxial compression loading tests on concrete, considering Young’s modulus and compressive strength of the coarse aggregate as variables, we elucidated how the coarse aggregate’s physical properties influence concrete's compressive strength, illustrated using a straightforward diagram. When the coarse aggregate’s Young's modulus is lower than the mortar's, the stress transfer path within the mortar bends and cracks more rapidly, significantly lowering strength. Conversely, if the coarse aggregate’s Young’s modulus exceeds that of the mortar, stress becomes concentrated in the aggregate, and the crack of the coarse aggregate governs the failure of concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Architecture, The University of Tokyo, Tokyo, Japan.
Department of Environmental Engineering and Architecture, Nagoya University, Nagoya, Japan.
Nuclear Power Department, Kajima Corporation, Tokyo, Japan.
References (64)
Show source-provided references
1. 1) AIJ. (1991). State-of-the-art report on high-strength concrete. Tokyo: Architectural Institute of Japan (AIJ) and Maruzen Publishing.
2. 2) Akçaoğlu, T., Tokyay, M., & Çelik, T. (2004). Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression. Cement and Concrete Composites, 26(6), 633-638. https://doi.org/10.1016/S0958-9465(03)00092-110.1016/S0958-9465(03)00092-1 ↗
3. 3) Bisschop, J., & van Mier, J. G. M. (2001). Shrinkage microcracking in cement-based materials with low water-cement-ratio. In: K. Kovler and A. Bentur, Eds. International conference on early age cracking in cementitious systems (EAC-1). Haifa 12-14 March 2001. Bagneux: RILEM Publications SARL, 79-88.
4. 4) Bolander, J. E., & Saito, S. (1998). Fracture analyses using spring networks with random geometry. Engineering Fracture Mechanics, 61(5-6), 569-591. https://doi.org/10.1016/S0013-7944(98)00069-110.1016/S0013-7944(98)00069-1 ↗
5. 5) Carrasquillo, R. L., Nilson, A. H., & Slate, F. O. (1981). Microcracking and behavior of high strength concrete subject to short-term loading. ACI Journal, 78(3), 179-186. https://doi.org/10.14359/691510.14359/6915 ↗
6. 6) Cusatis, G., Bažant Zdeněk, P., & Cedolin, L. (2003). Confinement-shear lattice model for concrete damage in tension and compression: I. Theory. Journal of Engineering Mechanics, 129(12), 1439-1448. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:12(1439)10.1061/(ASCE)0733-9399(2003)129:12(1439) ↗
7. 7) de Larrard, F., & Belloc, A. (1997). The influence of aggregate on the compressive strength of normal and high-strength concrete. ACI Materials Journal, 94(5), 417-426. https://doi.org/10.14359/32610.14359/326 ↗
8. 8) Elsharief, A., Cohen, M. D., & Olek, J. (2003). Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone. Cement and Concrete Research, 33(11), 1837-1849. https://doi.org/10.1016/S0008-8846(03)00205-910.1016/S0008-8846(03)00205-9 ↗
9. 9) Giaccio, G., Rocco, C., Violini, D., Zappitelli, J., & Zerbino, R. (1992). High-strength concretes incorporating different coarse aggregates. ACI Materials Journal, 89(3), 242-246. https://doi.org/10.14359/256810.14359/2568 ↗
10. 10) Hsu, T. T. C., Slate, F. O., Sturman, G. M., & Winter, G. (1963). Microcracking of plain concrete and the shape of the stress-strain curve. ACI Journal, 60(2), 209-224. https://doi.org/10.14359/785210.14359/7852 ↗
11. 11) Izumi, M., Mihashi, H., & Sasaki, T. (1980). A study of the concrete fracture mechanism under uniaxial compressive load. Transactions of the Architectural Institute of Japan, 289(3), 11-25. (in Japanese). https://doi.org/10.3130/aijsaxx.289.0_1110.3130/aijsaxx.289.0_11 ↗
12. 12) JSA. (2020). Crushed stone and manufactured sand for concrete (JIS A 5005:2020). Tokyo: Japanese Standards Association.
13. 13) JSCE. (2010). Standard specifications for concrete structures, 2007: Design. Tokyo: Japan Society of Civil Engineers.
14. 14) Kakizaki, M., & Edahiro, H. (1993). Effects of coarse aggregate characteristics on mechanical properties of ultra high-strength concrete. Journal of Structural and Construction Engineering, 451, 19-32. https://doi.org/10.3130/aijsx.451.0_1910.3130/aijsx.451.0_19 ↗
15. 15) Kawakami, H. (1969). Effect of size and quality of aggregate on compressive strength of concrete (I). Transactions of the Architectural Institute of Japan, 166, 19-27. (in Japanese) https://doi.org/10.3130/aijsaxx.166.0_1910.3130/aijsaxx.166.0_19 ↗
16. 16) Kawakami, H. (1991). Impact of aggregate rock type on physical properties of concrete. Proceedings of Japan Concrete Institute, 13(1), 63-68. (in Japanese) https://data.jci-net.or.jp/data_html/13/013-01-1007.html
17. 17) Königsberger, M., Pichler, B., & Hellmich, C. (2014). Micromechanics of ITZ‐aggregate interaction in concrete, Part II: Strength upscaling. Journal of the American Ceramic Society, 97(2), 543-551. https://doi.org/10.1111/jace.1260610.1111/jace.12606 ↗
18. 18) Kosaka, Y., & Tanigawa, Y. (1975). Effect of coarse aggregate on fracture of concrete: Part 2: Study on microscopic observation. Transactions of the Architectural Institute of Japan, 231, 1-11. (in Japanese) https://doi.org/10.3130/aijsaxx.231.0_110.3130/aijsaxx.231.0_1 ↗
19. 19) Kosaka, Y., Tanigawa, Y., & Oota, F. (1975). Effect of coarse aggregate on fracture of concrete: Part 1: Model analysis. Transactions of the Architectural Institute of Japan, 228(0), 1-11 (in Japanese). https://doi.org/10.3130/aijsaxx.228.0_110.3130/aijsaxx.228.0_1 ↗
20. 20) Kosmatka, S. H. (1994). Bleed water. In: J. F. Lamand & J. H. Pielert Eds. Significance of Tests and Properties of Concrete and Concrete-making Materials (STP 169C), 99-124. West Conshohocken Pennsylvania: ASTM International.
21. 21) Leong, L. T., Zhe, C., Mohamed, A. A., & Choong, W. K. (2014). Effects of aggregate size on concrete shear strength. Advanced Materials Research, 970, 143-146. https://doi.org/10.4028/www.scientific.net/AMR.970.14310.4028/www.scientific.net/AMR.970.143 ↗
22. 22) Liu, M., & Wang, F. (2022). Numerical simulation of influence of coarse aggregate crushing on mechanical properties of concrete under uniaxial compression. Construction and Building Materials, 342B, 128081. https://doi.org/10.1016/j.conbuildmat.2022.12808110.1016/j.conbuildmat.2022.128081 ↗
23. 23) Liu, T. C. Y., Nilson, A. H., & Floyd, O. S. (1972). Stress-strain response and fracture of concrete in uniaxial and biaxial compression. ACI Journal, 69(5), 291-295.10.14359/7148 ↗
24. 24) Maleki, M., Rasoolan, I., Khajehdezfuly, A., & Jivkov, A. P. (2020). On the effect of ITZ thickness in meso-scale models of concrete. Construction and Building Materials, 258, 119639. https://doi.org/10.1016/j.conbuildmat.2020.11963910.1016/j.conbuildmat.2020.119639 ↗
25. 25) Maruyama, I., Haba, K., Sato, O., Ishikawa, S., Kontani, O., & Takizawa, M. (2016). A numerical model for concrete strength change under neutron and gamma-ray irradiation. Journal of Advanced Concrete Technology, 14(4), 144-163. https://doi.org/10.3151/jact.14.14410.3151/jact.14.144 ↗
26. 26) Maruyama, I., Kontani, O., Takizawa, M., Sawada, S., Ishikawa, S., Yasukouchi, J., Sato, O., Etoh, J., & Igari, T. (2017). Development of soundness assessment procedure for concrete members affected by neutron and gamma-ray irradiation. Journal of Advanced Concrete Technology, 15(9), 440-523. https://doi.org/10.3151/jact.15.44010.3151/jact.15.440 ↗
27. 27) Maruyama, I., Sasano, H., Nishioka, Y., & Igarashi, G. (2014). Strength and Young’s modulus change in concrete due to long-term drying and heating up to 90 °C. Cement and Concrete Research, 66, 48-63. https://doi.org/10.1016/j.cemconres.2014.07.01610.1016/j.cemconres.2014.07.016 ↗
28. 28) Meddah, M. S., Zitouni, S., & Belâabes, S. (2010). Effect of content and particle size distribution of coarse aggregate on the compressive strength of concrete. Construction and Building Materials, 24(4), 505-512. https://doi.org/10.1016/j.conbuildmat.2009.10.00910.1016/j.conbuildmat.2009.10.009 ↗
29. 29) Mehta, P. K., & Monteiro, P. J. M. (2006). Concrete: Microstructure, properties and materials. (3rd ed.). New York: McGraw-Hill.
30. 30) Miura, T., Sato, K., Fujishima, M., Nakamura, H., & Kawabata, Y. (2022). Mechanism for reduction in compressive properties of cementitious materials in relation to internal crack patterns due to ASR and DEF expansion. Cement and Concrete Composites, 128, 104441. https://doi.org/10.1016/j.cemconcomp.2022.10444110.1016/j.cemconcomp.2022.104441 ↗
31. 31) Monteiro, J. J. M., & Mehta, P. K. (1985). Ettringite formation on the aggregate - cement paste interface. Cement and Concrete Research, 15(2), 378-380. https://doi.org/10.1016/0008-8846(85)90049-310.1016/0008-8846(85)90049-3 ↗
32. 32) Naderi, S., Tu, W., & Zhang, M. (2021). Meso-scale modelling of compressive fracture in concrete with irregularly shaped aggregates. Cement and Concrete Research, 140, 106317. https://doi.org/10.1016/j.cemconres.2020.10631710.1016/j.cemconres.2020.106317 ↗
33. 33) Nagai, K., Sato, Y., & Ueda, T. (2005). Mesoscopic simulation of failure of mortar and concrete by 3D RBSM. Journal of Advanced Concrete Technology, 3(3), 385-402. https://doi.org/10.3151/jact.3.38510.3151/jact.3.385 ↗
34. 34) Perras, M. A., & Diederichs, M. S. (2014). A review of the tensile strength of rock: concepts and testing. Geotechnical and Geological Engineering, 32, 525-546. https://doi.org/10.1007/s10706-014-9732-010.1007/s10706-014-9732-0 ↗
35. 35) Pihlajavaara, S. E. (1974). A review of some of the main results of a research on the ageing phenomena of concrete: Effect of moisture conditions on strength, shrinkage and creep of mature concrete. Cement and Concrete Research, 4(5), 761-771. https://doi.org/10.1016/0008-8846(74)90048-910.1016/0008-8846(74)90048-9 ↗
36. 36) Prokopski, G., & Langier, B. (2000). Effect of water/cement ratio and silica fume addition on the fracture toughness and morphology of fractured surfaces of gravel concretes. Cement and Concrete Research, 30(9), 1427-1433. https://doi.org/10.1016/S0008-8846(00)00332-X10.1016/S0008-8846(00)00332-X ↗
37. 37) Richard, P., & Cheyrezy, M. (1995). Composition of reactive powder concretes. Cement and Concrete Research, 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-210.1016/0008-8846(95)00144-2 ↗
38. 38) Rokugo, K., Iwasa, M., Suzuki, T., Koyanagi, K. (1989). Testing method to determine tensile strain softening curve and fracture energy of concrete. In: H. Mihashi, H. Takahashi and F. H. Wittmann Eds. Fracture Toughness and Fracture Energy: Test Methods for Concrete and Rock. Rotterdam: Balkema, 155-163.
39. 39) Roy, D. M., & Gouda, G. R. (1973). High strength generation in cement pastes. Cement and Concrete Research, 3(6), 807-820. https://doi.org/10.1016/0008-8846(73)90013-610.1016/0008-8846(73)90013-6 ↗
40. 40) Roy, D. M., Gouda, G. R., & Bobrowsky, A. (1972). Very high strength cement pastes prepared by hot pressing and other high pressure techniques. Cement and Concrete Research, 2(3), 349-366. https://doi.org/10.1016/0008-8846(72)90075-010.1016/0008-8846(72)90075-0 ↗
41. 41) Sasano, H., & Maruyama, I. (2021). Mechanism of drying-induced change in the physical properties of concrete: A mesoscale simulation study. Cement and Concrete Research, 143, 106401. https://doi.org/10.1016/j.cemconres.2021.10640110.1016/j.cemconres.2021.106401 ↗
42. 42) Sasano, H., & Maruyama, I. (2024). Investigation into the changes in the splitting tensile strength of concrete subjected to long-term drying using a three-phase mesoscale RBSM. Cement and Concrete Composites, 148, 105462. https://doi.org/10.1016/j.cemconcomp.2024.10546210.1016/j.cemconcomp.2024.105462 ↗
43. 43) Sasano, H., Maruyama, I., Sawada, S., Ohkubo, T., Murakami, K., & Suzuki, K. (2020). Meso-scale modelling of the mechanical properties of concrete affected by radiation-induced aggregate expansion. Journal of Advanced Concrete Technology, 18(10), 648-677. https://doi.org/10.3151/jact.18.64810.3151/jact.18.648 ↗
44. 44) Scrivener, K. L., John, V. M., & Gartner, E. M. (2018). Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry. Cement and Concrete Research, 114, 2-26. https://doi.org/10.1016/j.cemconres.2018.03.01510.1016/j.cemconres.2018.03.015 ↗
45. 45) Shah, S. P., & Sankar, R. (1987). Internal cracking and strain softening response of concrete under uniaxial compression. ACI Materials Journal, 84(3), 200-212. https://doi.org/10.14359/192610.14359/1926 ↗
46. 46) Stock, A. F., Hannantt, D. J., & Williams, R. I. T. (1979). The effect of aggregate concentration upon the strength and modulus of elasticity of concrete. Magazine of Concrete Research, 31(109), 225-234. https://doi.org/10.1680/macr.1979.31.109.22510.1680/macr.1979.31.109.225 ↗
47. 47) Tasong, W. A., Lynsdale, C. J., & Cripps, J. C. (1999). Aggregate-cement paste interface: Part I. Influence of aggregate geochemistry. Cement and Concrete Research, 29(7), 1019-1025. https://doi.org/10.1016/S0008-8846(99)00086-110.1016/S0008-8846(99)00086-1 ↗
48. 48) Taylor, M. A., & Broms, B. B. (1964). Shear bond strength between coarse aggregate and cement paste or mortar. ACI Journal, 61(8), 939-958.10.14359/7815 ↗
49. 49) Tazawa, E.-I., & Miyazawa, S. (1995). Experimental study on mechanism of autogenous shrinkage of concrete. Cement and Concrete Research, 25(8), 1633-1638. https://doi.org/10.1016/0008-8846(95)00159-X10.1016/0008-8846(95)00159-X ↗
50. 50) Tsuruta, H. (2000). Study on impact of quality of coarse aggregate on physical properties of high strength concrete. Thesis (Ph.D). Kyushu University. (in Japanese)
51. 51) Vonk, R. A. R. (1992). Softening of concrete loaded in compression. Thesis (Ph.D). Eindhoven University of Technology. https://doi.org/10.6100/IR375705
52. 52) Walker, S., & Bloem, D. L. (1960). Effects of aggregate size on properties of concrete. ACI Journal, 57(9), 283-298. https://doi.org/10.14359/802110.14359/8021 ↗
53. 53) Watanabe, S., Jinnai, H., & Kuroiwa, S. (2017). Study on influence of coarse aggregate on Young’s modulus of high strength concrete. Journal of Structural and Construction Engineering, 82(733), 321-327. (in Japanese) https://doi.org/10.3130/aijs.82.32110.3130/aijs.82.321 ↗
54. 54) Watanabe, S., Kuroiwa, S., Jinnai, H., & Namiki, S. (2005). Study on physical properties of coarse aggregate which affects compressive strength of high strength concrete. Journal of Structural and Construction Engineering, 70, 21-27. (in Japanese) https://doi.org/10.3130/aijs.70.21_110.3130/aijs.70.21_1 ↗
55. 55) Watanabe, S., Kuroiwa, S., Jinnai, H., & Namiki, S. (2006). Study on compressive strength of high strength concrete which mixed two kinds of crushed stones. Journal of Structural and Construction Engineering, 71, 9-15. (in Japanese) https://doi.org/10.3130/aijs.71.9_210.3130/aijs.71.9_2 ↗
56. 56) Wawersik, W. R., & Fairhurst, C. (1970). A study of brittle rock fracture in laboratory compression experiments. International Journal of Rock Mechanics and Mining Sciences, 7(5), 561-575. https://doi.org/10.1016/0148-9062(70)90007-010.1016/0148-9062(70)90007-0 ↗
57. 57) Wu, K.-R., Chen, B., Yao, W., & Zhang, D. (2001). Effect of coarse aggregate type on mechanical properties of high-performance concrete. Cement and Concrete Research, 31(10), 1421-1425. https://doi.org/10.1016/S0008-8846(01)00588-910.1016/S0008-8846(01)00588-9 ↗
58. 58) Yamamoto, Y., Nakamura, H., Kuroda, I., & Furuya, N. (2008). Analysis of compression failure of concrete by three dimensional rigid body spring network model. Doboku Gakkai Ronbunshuu E, 64, 612-630. (in Japanese) https://doi.org/10.2208/jsceje.64.61210.2208/jsceje.64.612 ↗
59. 59) Yamamoto, Y., Nakamura, H., Kuroda, I., & Furuya, N. (2014). Crack propagation analysis of reinforced concrete wall under cyclic loading using RBSM. European Journal of Environmental and Civil Engineering, 18(7), 780-792. https://doi.org/10.1080/19648189.2014.88175510.1080/19648189.2014.881755 ↗
60. 60) Yurtdas, I., Burlion, N., Shao, J. F., & Li, A. (2011). Evolution of the mechanical behaviour of a high performance self-compacting concrete under drying. Cement and Concrete Composites, 33(3), 380-388. https://doi.org/10.1016/j.cemconcomp.2010.12.00210.1016/j.cemconcomp.2010.12.002 ↗
61. 61) Zhao, H., Wu, Z., Liu, A., & Zhang, L. (2022). Numerical insights into the effect of ITZ and aggregate strength on concrete properties. Theoretical and Applied Fracture Mechanics, 120, 103415. https://doi.org/10.1016/j.tafmec.2022.10341510.1016/j.tafmec.2022.103415 ↗
62. 62) Zhou, F. P., Lydon, F. D., & Barr, B. I. G. (1995). Effect of coarse aggregate on elastic modulus and compressive strength of high performance concrete. Cement and Concrete Research, 25(1), 177-186. https://doi.org/10.1016/0008-8846(94)00125-i10.1016/0008-8846(94)00125-I ↗
63. 63) Zhou, X., Xie, Y., Long, G., & Li, J. (2021). Effect of surface characteristics of aggregates on the compressive damage of high-strength concrete based on 3D discrete element method. Construction and Building Materials, 301, 124101. https://doi.org/10.1016/j.conbuildmat.2021.12410110.1016/j.conbuildmat.2021.124101 ↗
64. 64) Zimbelmann, R. (1985). A contribution to the problem of cement-aggregate bond. Cement and Concrete Research, 15(5), 801-808. https://doi.org/10.1016/0008-8846(85)90146-210.1016/0008-8846(85)90146-2 ↗