Electro-Osmosis Applied for Formwork Removal of Concrete
Source abstract
Abstract
The release agents currently used to facilitate demolding and protect formworks from corrosion present some risks to users and the environment. This study focuses on a new demolding technique based on polarization, with the aim to eliminate the use of release agents. The tests were carried out on ordinary concrete C25/30 at 20±2°C. The methodology and conditions to obtain a good quality of concrete surface and demolding are presented herein.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Electrokinetic Soil Remediation Techniques · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Artois, LGCgE, France.
References (18)
Show source-provided references
1. AFNOR, (1981). “Norme NF P 18-451 : Bétons. Essais d'affaissement.”
2. Araujo de Lima, S., Stemmelen, D., Moyne, C. and Murad, M., (2006). “Couplage transport-chimie en milieux argileux.” GDR MoMaS.
3. Beddiar, K., (2001). “Sur certains aspects des couplages dans les milieux poreux électrisés. Application à l' électro-osmose dans les argiles.” Thesis (PhD). Ecole Nationale des Ponts et Chaussées.
4. Broda, M., (2002). “Détermination de l'énergie d'activation apparente des bétons par voie calorimétrique.” Thesis (PhD). Université d'Artois.
5. Cambefort, H. and Caron, C., (1961). “Electro-osmose et consolidation électro-chimique des argiles.” Géotechnique, 11(3), 203-223.
6. De Caro, P., Djelal, C., Libessart, L. and Dubois, I., (2007). “Influence of the nature of the demoulding agent on the properties of the formwork-concrete interface.” Magazine of Concrete Research, 59(2), 141-149.10.1680/macr.2007.59.2.141 ↗
7. Djelal, C., (2001). “Designing and perfecting a tribometer for the study of friction of a concentrated clay-water mixture against a metallic surface.” Materials and Structure, 34(1), 51-58.10.1007/BF02482200 ↗
8. Djelal, C., Vanhove, Y., Chambellan, D. and Brisset, P., (2010). “Influence of the application method of release agents on thickness of mould oils.” Materials and Structures, 43(5), 687-698.10.1617/s11527-009-9521-z ↗
9. Hurd, M. K., (1990). “Avoiding arguments over architectural concrete, architects and contractors need good specifications and a realistic understanding of available technology.” The Aberdeen Group.
10. INRS, (2007). “Produits de démoulage des bétons compositions, mesure de prévention.” Aide-mémoire technique, INRS Ed 6017.
11. Jolicoeur, C., Khayat, K. H., Pavate, T. and Payé, M., (2000). “Evaluation of effect of chemical admixture and supplementary cementitiouse materials on stability of cement-based materials using in-situ conductivity method.” The British Library, 461-484.
12. Koehler, E. P., (2004). “Development of a Portable Rheometer for Portland Cement Concrete.” Thesis (PhD). University of Texas.
13. Lambe, W. T. and Whitman, R. V., (1969). “Soil Mechanics.” Massachusetts Institute of Technology, John Wiley and Sons, Inc.
14. Lemaire, G., (2003). “Contribution à la maitrise de la qualité des parement.” Thesis (PhD). Université de Toulouse III.
15. Lemaire, G., Escadeillas, G. and Ringot, E., (2005). “Evaluating concrete surfaces using an image analysis process.” Construction and Building Materials, 19, 604-611.10.1016/j.conbuildmat.2005.01.025 ↗
16. Mitchell, J. P., (1976). “Fundamentals of soil behaviour.” John Wiley and Sons, Inc, New York, USA.
17. Saad Morsy, M., (1998). “Effect of temperature on electrical conductivity of blended cement pastes.” Cement and Concrete Research, 29(4), 603-606.10.1016/S0008-8846(98)00198-7 ↗
18. Teichman, G., (1990). “The use of colorimetric methods in the concrete industry.” Concrete Precast Plant Technology, 58-73.