Influence of Temperature and Added Lime on the Glassy Phase Dissolution in Low-calcium Fly ash Binary Blend
Source abstract
Abstract
The influence of temperature and added lime on the dissolution of the glassy phase in a binary blend of low-calcium siliceous fly ash and cement. An XRD-based technique is used for quantification of the glassy phase content and the amorphous reaction products in the binary blend. The experimental technique allows for tracking the formation of amorphous reaction products, the availability of lime and the unreacted glassy content. The rate limiting step in the pozzolanic reaction of low calcium fly ash is established to be the dissolution of its glassy phase. Results indicate that increasing the temperature from 25℃ to 40℃ produces a significant increase in the rate of dissolution of the glassy phase of fly ash and an increase in the rate of formation of reaction products. Addition of quicklime is very effective in producing reactive lime in the solution. The rate of dissolution of the glassy phase of fly ash and the rate of pozzolanic reaction are not significantly influenced by the lime content in the system. The proportion of fly ash which remains unreacted which is indicated by the undissolved glassy phase depends on the availability of lime in the system.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Indian Institute of Technology Hyderabad, Hyderabad, India.
References (50)
Show source-provided references
1. 1) Antiohos, S. K., Papageorgiou, A., Papadakis, V. G. and Tsimas, S., (2008). “Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes.” Constr. Build. Mater., 22, 1191-1200.10.1016/j.conbuildmat.2007.02.001 ↗
2. 2) Antiohos, S. K. and Tsimas, S., (2004). “Activation of fly ash cementitious systems in the presence of quick lime (part-1) Compressive strength and pozzolanic reaction rate.” Cem. Concr. Res., 34, 769-779.10.1016/j.cemconres.2003.08.008 ↗
3. 3) ASTM, (2015). “Standard C 618: Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.”
4. 4) Bhagath singh, G. V. P. and Subramaniam, K. V. L., (2016a). “Quantitative XRD analysis of binary blends of siliceous fly ash and hydrated cement.” J. Mater. Civ. Eng., 28(8), 04016042 (1-7).10.1061/(ASCE)MT.1943-5533.0001554 ↗
5. 5) Bhagath Singh, G. V. P. and Subramaniam, K. V. L., (2016b) “Direct decomposition X-ray diffraction method for amorphous phase quantification and glassy phase determination in binary blends of siliceous fly ash and hydrated cement.” Journal of Sustainable Cement-Based Materials, http://dx.doi.org/10.1080/21650373.2016.1177478.10.1080/21650373.2016.1177478 ↗
6. 6) Bhagath Singh, G. V. P. and Subramaniam, K. V. L., (2016c). “Method for Direct Determination of Glassy Phase Dissolution in Hydrating Fly ash-Cement System Using X-ray Diffraction” Journal of American Ceramic Society, doi:10.1111/jace.14486.10.1111/jace.14486 ↗
7. 7) Brown, P. W., (1986). “The system Na2O-CaO-SiO2-H2O.” J. Am. Ceram. Soc., 73, 3457-63.
8. 8) Bruker AXS, (2009). TOPAS V4.2: General Profile and Structure Analysis Software for Powder Diffraction Data, B. A. Karlsruhe.
9. 9) Brunet, F., Charpentier, T., Chao, C. N., Peycelon, H. and Nonat, A., (2010). “Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes.” Cem. Concr. Res., 40(2), 208-19.10.1016/j.cemconres.2009.10.005 ↗
10. 10) Bureau of Indian Standards, (1999). “Methods of physical tests for hydraulic cement.” IS 4031(part-2), New Delhi, India.
11. 11) Bureau of Indian Standards, (2003a). “Methods of test for pozzolanic materials.” IS 1727, New Delhi, India.
12. 12) Bureau of Indian Standards, (2003b). “Pulverized fuel ash-specification.” IS 3812-part 1, New Delhi, India.
13. 13) Bureau of Indian Standards, (2013). “Ordinary Portland cement, 53 Grade-Specifications.” IS 12269, New Delhi, India.
14. 14) Creagh, D. C. and Hubbell, J. H., (2006). “X-ray absorption (or attenuation) coefficients.” In: E. Prince (Ed.), Int. Tables Crystallogr. Vol. C Math. Phys. Chem. Tables, 6th ed., International Union of Crystallography, 220-229.
15. 15) Deschner, F., Unch, B. M., Winnefeld, F. and Lothenbach, B., (2013). “Quantification of fly ash in hydrated, blended Portland cement pastes by backscattered electron imaging.” J. Microsc., 251(2), 188-204.10.1111/jmi.12061 ↗
16. 16) Deschner, F., Winnefeld, B., Lothenbach, S., Seufert, P., Schwesig, S., Dittrich, F., Neunhoeffer, G. and Neubauer, J., (2012). “Hydration of a portland cement with high replacement by siliceous fly ash.” Cem Concr Res., 42(10), 1389-1400.10.1016/j.cemconres.2012.06.009 ↗
17. 17) Durdziński, P. T., Dunant, C. F., Haha, M. B. and Scrivener, K. L., (2015a). “A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste.” Cem. Concr. Res., 73 111-22.10.1016/j.cemconres.2015.02.008 ↗
18. 18) Durdziński, P. T., Snellings, R., Dunant, C. F., Haha, M. B. and Scrivener, K. L., (2015b). “Fly ash as an assemblage of model Ca–Mg–Na-aluminosilicate glasses,” Cem. Concr. Res., 78 [part-B], 263-72.10.1016/j.cemconres.2015.08.005 ↗
19. 19) Feng, X., Garboczi, E. J., Bentz, D. P., Stutzman, P. E. and Mason, T. O., (2004). “Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure.” Cem. Concr. Res., 34(10), 1787-93.10.1016/j.cemconres.2004.01.014 ↗
20. 20) Fernández-Jiménez, A., de la Torre, A. G., Palomo, A., López-Olmo, G., Alonso, M. M. and Aranda, M. A. G., (2006). “Quantitative determination of phases in the alkaline activation of fly ash. Part II: degree of reaction.” Fuel, 85(15), 1960-69.
21. 21) Fraay, A. L. A., Bijen, J. M. and de Haan, Y. M., (1989). “The reaction of fly ash in concrete a critical examination.” Cem. Concr. Res., 19(2), 235-246.10.1016/0008-8846(89)90088-4 ↗
22. 22) Gray, D. H. and Lin, Y. K., (1972). “Engineering properties of compacted fly ash.” J. Soil Mech. Found. Div., 98(4), 361- 380.10.1061/JSFEAQ.0001744 ↗
23. 23) Haha, M. B., Weerdt, K. D. and Lothenbach, B., (2010), “Quantification of the degree of reaction of fly ash.” Cem. Concr. Res., 40(11), 1620-1629.10.1016/j.cemconres.2010.07.004 ↗
24. 24) Huang, S. and Cheng, J., (1986). “Kinetic of reaction in the system fly ash- Ca(OH)2-H2O.” J. Chin. Ceram. Soc., 14(1), 191-197.
25. 25) ICSD, (2013). “Inorganic crystal structure database.” Fachinformationszentrum: Karlsruhe, Germany.
26. 26) Powder Diffraction File-2, “International Centre for Diffraction Data,” edited by Frank McClune, 12 Campus Boulevard, Newtown Square, PA, 19073-3272, 2013.
27. 27) Li, S., Roy, D. M. and Amitabha, K., (1985). “Quantitative determination of pozzolanas in hydrated sstems of cement or Ca(OH)2 with fly ash or silica fume.” Cem. Concr. Res., 15(6). 1079-86.
28. 28) Lokken, R. O., Shade, J. W. and Martin, P. F. C., (1990). “Effect of curing temperature on the properties of cementitious waste forms.” Mater. Res. Soc. Symp. Proc., 176, 23-29.
29. 29) Luke, K. and Glasser, F. P., (1987). “Selective dissolution of hydrated blast furnace slag cements.” Cem. Concr. Res., 17(2), 273-82.10.1016/0008-8846(87)90110-4 ↗
30. 30) Luke, K. and Glasser, F. P., (1988). “Internal chemical evolution of the constitution of blended cements.” Cem. Concr. Res., 18(4), 495-502.10.1016/0008-8846(88)90042-7 ↗
31. 31) Luxan, M. P., Sanchez de Rojas, M. I. and Frias, M., (1989). “Investigations on the fly ash-calcium hydroxide reactions.” Cem. Concr. Res., 19, 69-80.10.1016/0008-8846(89)90067-7 ↗
32. 32) Ma, W. and Brown, P. W., (1997). “Hydrothermal reactions of fly ash with Ca(OH)2 and CaSO4-2H2O.” Cem. Concr. Res., 27(8), 1237-1248.10.1016/S0008-8846(97)00116-6 ↗
33. 33) Ma, W., Liu, C., Brown, P. W. and Komarneni, S., (1995). “Pore structures of fly ashes activated by Ca(OH)2 and CaSO4-2H2O.” Cem. Concr. Res., 25(2), 417- 425.10.1016/0008-8846(95)00027-5 ↗
34. 34) Ma, W., Sample, D., Martin, R. and Brown, P. W., (1994). “Calorimetric study of cement blends containing fly ash, silica fume and slag at elevated temperature.” Cem. Concr. Aggr., 16, 93-9910.1520/CCA10285J ↗
35. 35) Madsen, I. C., Scarlett, N. V. Y. and Kern, A., (2011). “Description and survey of methodologies for the determination of amorphous content via X-ray powder diffraction.” Z. Kristallogr., 226(12), 944-55.10.1524/zkri.2011.1437 ↗
36. 36) Maltais, Y. and Marchand, J., (1997), “Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars.” Cem. Concr. Res., 27(7), 1009-1020.10.1016/S0008-8846(97)00098-7 ↗
37. 37) Mira, P., Papadakis, V. G. and Tsimas, S., (2002). “Effect of lime putty addition on structural and durability properties of concrete.” Cem. Concr. Res., 32(5), 683-689.10.1016/S0008-8846(01)00744-X ↗
38. 38) O'Connor, B. H. and Raven, M. D., (1988). “Application of the Rietveld refinement procedure in assaying powdered mixtures.” Powder Diffr., 3(1), 2-6.10.1017/S0885715600013026 ↗
39. 39) Ohsawa, S., Asaga, K., Goto, S. and Daimon, M., (1985). “Quantitative determination of fly ash in the hydrated fly ash -CaSO4•2H2O-Ca(OH)2 system.” Cem. Concr. Res., 15(2), 357-366.10.1016/0008-8846(85)90047-X ↗
40. 40) Pawley, G. S., (1981). “Unit-cell refinement from powder diffraction scans.” J. Appl. Crystallogr., 14(6), 357-61.10.1107/S0021889881009618 ↗
41. 41) Pietersen, H. S., Fraay, A. L. A. and Bijen, J. M., (1990). “Reactivity of fly ash at high pH.” Mat. Res. Soc. Symp. Proc., 178, 139-157.
42. 42) Riello, P., (2004). “Quantitative analysis of amorphous fraction in the study of the microstructure of semi-crystalline materials.” In: E. J. Mittemeijer and P. Scardi Eds., Diffraction Analysis of the Microstructure of Materials, Berlin Heidelberg: Springer Verlag.
43. 43) Sakai, E., Miyahara, S., Ohsawa, S., Lee, S. H. and Daimon, M., (2005). “Hydration of fly ash cement.” Cem. Concr. Res., 35(6), 1135-1140.10.1016/j.cemconres.2004.09.008 ↗
44. 44) Scarlett, N. V. Y. and Madsen, I. C., (2006). “Quantification of phases with partial or no known crystal structures.” Powder Diffr., 21(4), 278-84.10.1154/1.2362855 ↗
45. 45) Scrivener, K. L., Lothenbach, B., Belie, N. D., Gruyaert, E., Skibsted, J., Snellings, R. and Vollpracht, A., (2015). “TC 238-SCM: hydration and microstructure of concrete with SCMs.” Mater. Struct. 48(4), 835-62.10.1617/s11527-015-0527-4 ↗
46. 46) Shi, C., (2001). “Studies on several factors affecting hydration and properties of lime-pozzolan cements.” J. Mat Civ. Eng. 13(6), 441-445.10.1061/(ASCE)0899-1561(2001)13:6(441) ↗
47. 47) Shi, C., (1999). “Studies on several factors affecting hydration and properties of lime- pozzolan cements.” J. Mater. Civ. Eng. 29(4), 467-472.
48. 48) Suprenant, B. A. and Papadopoulo, G., (1991). “Selective dissolution of Portland-fly ash cements.” J. Mater Civ Eng., 3(1), 48-59.10.1061/(ASCE)0899-1561(1991)3:1(48) ↗
49. 49) Toby, B. H., (2006), “R factors in Rietveld analysis: How good is good enough.” Powder Diffr., 21(1), 67-70.10.1154/1.2179804 ↗
50. 50) Zhang, Y. M., Sun, W. and Yan, H. D., (2000). “Hydration of high-volume fly ash cement pastes.” Cem. Concr. Comp., 22, 445-452.10.1016/S0958-9465(00)00044-5 ↗