journal article·2017-02-17Open access

Mechanical Behavior of Widening Prestressed Concrete Deck Slabs under Concentrated Load

Fakhruddin, Takuro Nakamura, Yuji Sato, Masahiko Yamada, Junichiro Niwa

Abstract

In a technique for widening prestressed concrete (PC) deck slabs, the connection between the old and new deck slabs is crossed by reinforcement and subjected to external prestressing force. A total of six PC deck slabs under a concentrated load were tested to evaluate the effect of the initial prestressing level, concrete strength of the new deck slab, and surface roughness of the interface. A three-dimensional FEM analysis was also conducted to complement the experimental results. The results showed that all PC deck slabs failed in a brittle manner when shear cracks developed at the interface between the old and new deck slabs. Thus, the effective area of the interface for the PC deck slabs under a concentrated load is proposed in this study. Furthermore, by using the value of the effective area instead of the total area of the interface, it has been confirmed that predicted shear capacities obtained from JSCE Specification, AASHTO, and fib Model Code 2010 provided a good lower limit for the experimental ultimate capacities.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Tokyo Institute of Technology, Japan.

Department of Civil and Environmental Eng., Tokyo Institute of Technology, Japan.

Technical Section, Fuji P.S. Corporation, Japan.

References (23)

Show source-provided references
1. 1) AASHTO LRFD, (2007). “Bridge design specifications.” American Association of State Highway and Transportation Officials.
2. 2) Chigira, E., Niwa, J., Tanaka, Y. and Katagiri, M., (2007). “Study on punching shear resistance of the UFC panel.” Proceeding of the JCI, 29(3), 1741-1746. (in Japanese)
3. 3) Clement, T., Ramos, A., Ruiz, M. and Muttoni A., (2013). “Design for punching of prestressed concrete slabs.” Structural Concrete, 12(2), 157-167.10.1002/suco.201200028 ↗
4. 4) Eder, M. A., Vollum, R. L., Elghazouli, A. Y. and Abdel-Fattah, T., (2010). “Modeling and experimental assessment of punching shear in flat slabs with shear-heads.” Engineering Structures, 32, 3911-3924.10.1016/j.engstruct.2010.09.004 ↗
5. 5) El-Gamal, S., El-Salakawy, E. and Benmokrane, B., (2007). “Influence of reinforcement on the behavior of concrete bridge deck slabs reinforced with FRP bars.” J. Compos. Constr., 11, 449-458.10.1061/(ASCE)1090-0268(2007)11:5(449) ↗
6. 6) Hamada, S., Yang, Q. and Mao, M., (2008). “Evaluation of punching shear strength of reinforced concrete slabs based on data base.” Journal of Advanced Concrete Technology, 6(1), 205-214.10.3151/jact.6.205 ↗
7. 7) Haskett, M., Oehlers, D. J., Mohamed Ali, M. S. and Sharma, S. K., (2011). “Evaluating the shear-friction resistance across sliding planes in concrete.” Engineering Structures, 33, 1357-1364.10.1016/j.engstruct.2011.01.013 ↗
8. 8) Higashiyama, H. and Matsui, S., (1998). “Fatigue durability of longitudinally prestressed concrete slabs under running wheel.” JSCE J. Struct Mech Earthq Eng, 605/I-45, 79-90. (in Japanese)10.2208/jscej.1998.605_79 ↗
9. 9) Hordijk, D. A., (1991). “Local approach to fatigue of concrete.” Thesis (PhD). Delft University of Technology.
10. 10) Hwang, H., Yoon, H., John, C. and Kim, B., (2010). “Punching and fatigue behavior of long-span prestressed concrete deck slabs.” Engineering Structures, 32, 2861-2872.10.1016/j.engstruct.2010.05.005 ↗
11. 11) International Federation for Structural Concrete, (2013). “Model code 2010.”
12. 12) Japan Road Association, (2012). “Design specification for highway bridges, Part III Concrete Bridges. (in Japanese)”
13. 13) Japan Society of Civil Engineers, (2007). “Standard specification for design of concrete structures, structure performance verification.”
14. 14) Maekawa, K. and Qureshi, J., (1997). “Stress transfer across interfaces in reinforced concrete due to aggregate interlock and dowel action.” J. Materials, Conc. Struct., Pavements, JSCE, 34(34), 159-172.10.2208/jscej.1997.557_159 ↗
15. 15) Mander, T. J., Mander, J. B. and Hite Head, M., (2011). “Modified yield line theory for full-depth precast concrete.” J. Bridge Eng., 16(1), 12-20.10.1061/(ASCE)BE.1943-5592.0000156 ↗
16. 16) Masui, T., Yamauchi, T., Morita, A., Sato, Y., Nishinaga, T., Tokumitsu, S., Yagi, Y., Yamada, M. and Yamaguchi, M., (25 April 2016). “Widening PC floor version structure and widening construction method of established PC floor version.” Japanese Unexamined Patent Application Publication No. 2016-61045.
17. 17) Muttoni, A. and Ruiz, M., (2012). “The levels-of-approximation approach in MC2010: Application to punching shear provisions.” Structural Concrete, 13(1).10.1002/suco.201100032 ↗
18. 18) Niwa, J., Fakhruddin, Matsumoto, K., Sato, Y., Yamada, Y. and Yamauchi, T., (2016). “Experimental study on shear behavior of the interface between old and new deck slabs.” Engineering Structures, 126, 278-291.10.1016/j.engstruct.2016.07.063 ↗
19. 19) Rahal, K. N., Khaleefi, A. L. and Al-Sanee, A., (2016). “An experimental investigation of shear-transfer strength of normal and high strength self compacting concrete.” Engineering Structures, 109, 16-25.10.1016/j.engstruct.2015.11.015 ↗
20. 20) Randl, N., (2013). “Design recommendations for interface shear transfer in fib Model Code 2010.” Structural Concrete, 14(3), 230-241.10.1002/suco.201300003 ↗
21. 21) Sivaleepunth, C., Niwa, J., Nguyen, D. H., Hasegawa, T. and Hamada, Y., (2009). “Shear carrying capacity of segmental prestressed concrete beam.” Journal of Materials, Concrete Structures and Pavements, JSCE, 65(1), 63-75.10.2208/jsceje.65.63 ↗
22. 22) Thorenfeldt, E., Tomaszewicz, A. and Jensen, J. J., (1987). “Mechanical properties of high-strength concrete and application in design.” Symposium Proceeding of Utilization of High-Strength Concrete, Norway.
23. 23) Turmo, J., Ramos, G. and Aparicio, A. C., (2006). “FEM modeling of unbonded post-tensioned segmental beams with dry joints.” Engineering Structures, 28, 1852-1863.10.1016/j.engstruct.2006.03.028 ↗