X-Ray Microtomography of Mortars Exposed to Freezing-Thawing Action
Source abstract
Abstract
This paper presents our findings on the application of X-ray microtomography to characterize the internal structure of mortars that were exposed to freezing-thawing action. A microfocus X-ray CT (micro-CT) scanner was used for the nondestructive 3D imaging of internal air voids or cracks at a spatial resolution of the order of 10 microns. Four different types of mortar specimens (i.e., non-air-entrained and air-entrained Portland cement mortar, and non-air-entrained and air-entrained fly ash mortar) were scanned after being subjected to different numbers of freeze-thaw cycles. Coupled with image analysis, the void space obtained from micro-CT was characterized in three dimensions (3D) in terms of void fraction and air void size distribution, as well as, the crack width and tortuosity of the connected crack network. Results suggest that the initial air voids follow a lognormal distribution with the highest population of modal size around 30-50 μm, irrespective of the type of mortar. As the distributed air voids of non-air entrained mortars were relatively few in numbers, the fly ash mortar in particular was the least resistant against frost damage as shown by the formation of internal cracks that meander around the weaker paste-aggregate interface. Indications also suggest that these cracks are well connected and anisotropic in 3D.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Rock Mechanics and Modeling · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, College of Engineering, De La Salle University, Manila, Philippines.
Environmental Material Engineering Laboratory, Graduate School of Engineering, Hokkaido University, Japan.
References (33)
Show source-provided references
1. Ammouche, A., Riss, J., Breysse, D. and Marchand, J. (2001). “Image analysis for the automated study of microcracks in concrete.” Cement and Concrete Composites, 23, 267-278.10.1016/S0958-9465(00)00054-8 ↗
2. Bentz, D. P., Halleck, P. M., Grader, A. S. and Roberts, J. W. (2006). “Four-dimensional X-ray microtomography study of water movement during internal curing.” In: Jensen, O.M., Lura, P. and Kovler, K. Eds., Proceedings of the International RILEM Conference - Volume Changes of Hardening Concrete: Testing and Mitigation, RILEM Publications S.A.R.L., 11-20.10.1617/2351580052.002 ↗
3. De Graef, B., Cnudde, V., Dick, J., De Belie, N., Jacobs, P. and Verstraete, W. (2005). “A sensitivity study for the visualization of bacterial weathering of concrete and stone with computerized X-ray microtomography.” Science of the Total Environment, 341, 173-183.10.1016/j.scitotenv.2004.09.035 ↗
4. Elaqra, H., Godin, N., Peix, G., Mili, M. R. and Fantozzi, G. (2007). “Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: effects of the sand/cement ratio.” Cement and Concrete Research. 37(5), 703-713.10.1016/j.cemconres.2007.02.008 ↗
5. Elzafraney, M. and Soroushian, P. (2004). “Assessment of microcrack development in concrete materials of different strengths.” Materials and Structures, 274, 724-731.10.1007/BF02480518 ↗
6. Gérard, B. and Marchand, J. (2000). “Influence of cracking on the diffusion properties of cement-based materials. Part I: Influence of continuous cracks on the steady-state regime.” Cement Concrete Research, 30, 37-43.
7. Hoshen, J. and Kopelman, R. (1976). “Percolation and cluster distribution. I. Cluster multiple labeling technique and critical concentration algorithm.” Phys. Rev. B. 14, 34-38.10.1103/PhysRevB.14.3438 ↗
8. Ikeda, S., Nakano, N. and Nakashima, Y. (2000). “Three-dimensional study on the interconnection and shape of crystals in a graphic granite by X-ray CT and image analysis.” Mineralogical Magazine. 64(5), 945-959.10.1180/002646100549760 ↗
9. Jacobsen, S., Marchand, J. and Hornain, H. (1995). “SEM observations of the microstructure of frost deteriorated and self healed concrete.” Cement and Concrete Research, 25(8), 55-62.
10. Kinney, J.H. and Nichols, M. C. (1992). “X-ray tomographic microscopy using synchrotron radiation.”Ann. Rev. Materials Sci 22. 121-152.
11. Lee T-C., Kashyap, R. and Chu C-N. (1994). “Building skeleton models via 3-d medial surface/axis thinning algorithms.” CVGIP Graph Models Image Process 56, 462-478.
12. Lindquist, W. D., Lee, S.-M., Coker, D., Jones, K. and Spanne, P. (1996). “Medial axis analysis of three-dimensional tomographic images of drill core samples.” Journal of Geophysical Research, 101B, 8297-8310.10.1029/95JB03039 ↗
13. Lindquist, W. D. (1999). “3DMA General Users Manual.” New York: State of New York at Stony Brook.
14. Litorowicz, A. (2006). “Identification and quantification of cracks in concrete by optical fluorescent microscopy.” Cement and Concrete Research, 36, 1508-1515.10.1016/j.cemconres.2006.05.011 ↗
15. Naik, N. N., Jupe, A. C., Stock, S. R., Wilkinson, A. P., Lee, P. L. and Kurtis, K. E. (2006). “Sulfate attack monitored by microCT and EDXRD: Influence of cement type, water-to-cement ratio, and aggregate.” Cement and Concrete Research, 36, 144-159.10.1016/j.cemconres.2005.06.004 ↗
16. Nakano, T., Tsuchiyama, A., Uesugi, K., Uesugi, M. and Shinohara, K. (2006). “SLICE -Software for basic 3-D image analysis [online].” Japan Synchrotron Radiation Research Institute (JASRI). Available from: http://www-bl20.spring8.or.jp/slice/ [5 April 2007].
17. Pigeon, M., Marchand, J. and Pleau, R. (1996). “Frost resistant concrete.” Construction and Building Materials, 10(5), 339-348.10.1016/0950-0618(95)00067-4 ↗
18. Prodanovic, M., Lindquist, W. B. and Seright, R. S. (2006). “Porous structure and fluid partitioning in polyethylene cores from 3D X-ray microtomographic imaging.” Journal of Colloid and Interface Science, 298, 282-297.10.1016/j.jcis.2005.11.053 ↗
19. Promentilla, M. A. B., Sugiyama, T., Hitomi, T. and Takeda, N. (2008a). “Characterizing the 3D pore structure of hardened cement paste with synchrotron microtomography.” Journal of Advanced Concrete Technology, 6(2), 273-286.10.3151/jact.6.273 ↗
20. Promentilla, M. A. B., Sugiyama, T. and Shimura, K. (2008b). “Three-dimensional imaging of cement-based materials with X-ray tomographic microscopy: Visualization and quantification.” In: Proceedings of the International Conference on Microstructure-related Durability of Cementitious Concrete, Nanjing: China, 13-15 Oct. 2008. 1357-1366.
21. Promentilla, M. A. B., Sugiyama, T. and Shimura, K. (2008c). “Three dimensional characterization of air void system in cement-based materials.” In: Proceedings of the 3rd Asian Concrete Federation (ACF) International Conference, Ho Chi Minh: Vietnam,11-13 Nov. 2008. 940-947.
22. Promentilla, M. A. B., Sugiyama, T., Hitomi, T. and Takeda, N. (2009a). “Quantification of tortuosity in hardened cement pastes using synchrotron-based X-ray computed microtomography.” Cement and Concrete Research, 39, 548-557.10.1016/j.cemconres.2009.03.005 ↗
23. Promentilla, M. A. B., Sugiyama, T., Hitomi, T. and Takeda, N. (2009b). “Pore space analysis and estimation of transport properties of deteriorated cementitious material using synchrotron microtomography.” In: Proceedings of the 2nd International RILEM workshop on Concrete Durability and Service Life Planning (ConcreteLife 2009). Haifa: Israel. 7-9 Sept. 2009. 498 - 506.
24. Rasband, W. (2007). ImageJ: Image processing and analysis in Java, National Institute of Health (NIH). Available from: http://rsb.info.nih.gov/ij/.
25. Robb, R. (1982). “X-ray computed microtomography: From basic principles to applications.” Ann. Rev. Biophys. Bioeng, Annual Reviews Inc. 11:177-201.
26. Ringot, E. and Bascoul, A. (2001). “About the analysis of microcracking in concrete.” Cement Concrete and Composites, 23, 261-266.10.1016/S0958-9465(00)00056-1 ↗
27. Salvo, L., Cloetens, P., Maire, E., Zabler, S., Blandin, J. J., Buffière, J. Y., Ludwig, W., Boller, E., Bellet, D. and Josserond, C. (2003). “X-ray micro-tomography an attractive characterisation technique in material science.” Nucl Instrum Methods Phys Res B200, 273-286.10.1016/S0168-583X(02)01689-0 ↗
28. Sheppard, A. P., Sok, R. M. and Averdunk, H. (2004). “Techniques for image enhancement and segmentation of tomographic images of porous materials.” Physica A, 339 (1-2), 45-151.
29. Sugiyama, T., Promentilla, M. A. B., Shimura, K. and Hatakeda, D. (2008). “Observation of entrained air distribution in mortar by X-ray computed tomography.” In: Proceedings of the Concrete Structure Scenarios, JSMS, 8, 99-104 (in Japanese).
30. Sugiyama, T., Promentilla, M. A. B., Hitomi, T. and Takeda, N. (2010). “Application of synchrotron microtomography for pore structure characterization of deteriorated cementitious materials due to leaching.” Cement and Concrete Research, in press.10.1016/j.cemconres.2009.10.009 ↗
31. Thomas, M. D. A., (1997). “Laboratory and field studies of salt scaling in fly ash concrete.” In: Frost Resistance of Concrete, Proceedings of the RILEM International Workshop on Resistance of Concrete to Freezing and Thawing with or without De-icing Chemicals, 21-30.
32. Van Geet, M., Swennen, R. and Wevers, M. (2000). “Quantitative analysis of reservoir rocks by microfocus X-ray computerised tomography.” Sediment. Geol. 132, 25-36.
33. Vincent, L. and Soille, P. (1991). “Watersheds in digital spaces: An efficient algorithm based on immersion simulations.” IEEE Transactions on Pattern Analysis and Machine Intelligence. 13, 583-585.10.1109/34.87344 ↗