Effects of Soak Solution Type on Alkali Release from Volcanic Aggre-gates − Is Alkali Release Really Responsible for Accelerating ASR Expansion? −
Source abstract
Abstract
Alkali release from aggregates is considered to cause expansion due to the alkali-silica reaction (ASR), owing to the increase in the hydroxide ion concentration (namely pH) of the pore solution. However, a direct validation of this assertion has not yet been made. In this research, the effects of the type of soak solution, which might better mimic the composition of the pore solution, on the behavior of alkali release from aggregates are investigated through immersion tests of aggregates. More importantly, accompanying ions dissolved from the aggregates are also measured in order to determine the mechanism for the increase in hydroxide ion concentration of the pore solution. The test results show that this increase can barely be observed, despite a considerable amount of alkalis being released. The results critically question the conventional view that alkali released from an aggregate serves to accelerate the ASR.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Port and Airport Research Institute, Yokosuka, Kanagawa Pref., Japan.
National Institute for Environmental Studies, Fukushima Branch, Miharu-Machi, Tamura-Gun, Fukushima Pref., Japan.
Graduate School of Engineering, Tohoku University, Sendai, Japan.
Civil Design and Materials, Faculty of Engineering, Kyushu University, Fukuoka, Japan.
References (27)
Show source-provided references
1. 1) Bérubé, M. A., Duchesne, J., Dorion, J. F. and Rivest, M., (2002) “Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity.” Cem. Concr. Res., 32, 1215-1227.10.1016/S0008-8846(02)00766-4 ↗
2. 2) Bérubé, M. A. and Fournier, B., (2004). “Alkalis releasable by aggregates in concrete-significance and test methods.” 12th International Conference on Alkali-Aggregate Reaction in Concrete, 17-30.
3. 3) Bérubé, M. A., Duchesne, J., Dorion, J. F. and Rivest, M., (2004a) “Reply to the discussion by C. Shi of the paper ‘Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity.’” Cem. Concr. Res., 34, 897-899.10.1016/j.cemconres.2003.10.002 ↗
4. 4) Bérubé, M. A., Duchesne, J., Dorion, J. F. and Rivest, M., (2004b) “A reply to the discussion by Mingshu Tang of the paper ‘Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity.’” Cem. Concr. Res., 34, 903-904.10.1016/j.cemconres.2003.10.001 ↗
5. 5) Constantiner, D. and Diamond, S., (2003). “Alkali release from feldspars into pore solutions.” Cem. Concr. Res., 33, 549-554.10.1016/S0008-8846(02)01001-3 ↗
6. 6) Drolet, C., Duchesne, J. and Fournier, B., (2017) “Validation of the alkali contribution by aggregates to the concrete pore solution.” Cem. Concr. Res., 98, 10-23.10.1016/j.cemconres.2017.04.001 ↗
7. 7) Duddy, I. R., (1980). “Redistribution and fraction of rare-earth and other elements in a weathering profile.” Chemical Geology, 30, 363-381.10.1016/0009-2541(80)90102-3 ↗
8. 8) Durand, B. (2000). “A note about alkali contribution from aggregates in concrete affected by ASR.” 11th International Conference on Alkali-Aggregate Reaction in Concrete, 169-177.
9. 9) Goguel, R., (1995). “Alkali release by volcanic aggregates in concrete.” Cem. Concr. Res., 25, 841-852.10.1016/0008-8846(95)00075-N ↗
10. 10) Grant, W. H., (1969). “Abrasion pH, an index of chemical weathering.” Clays and Clay Minerals, 17, 151-155.10.1346/CCMN.1969.0170303 ↗
11. 11) Grattan-Bellew, P. E. and Beaudoin, J. J., (1980). “Effect of phlogopite mica on alkali-aggregate expansion in concrete.” Cem. Concr. Res. 10. 789-797.10.1016/0008-8846(80)90007-1 ↗
12. 12) Hong, S. H. and Glasser, F. P., (1999). “Alkali binding in cement pastes: Part I The C-S-H Phase.” Cem. Concr. Res., 29, 1893-1903.10.1016/S0008-8846(99)00187-8 ↗
13. 13) Hong, S. H. and Glasser, F. P., (2002). “Alkali sorption by C-S-H and C-A-S-H gels: Part II Role of alumina.” Cem. Concr. Res., 32, 1101-1111.10.1016/S0008-8846(02)00753-6 ↗
14. 14) Kawabata, Y. and Yamada, K., (2015). “Evaluation of alkalinity of pore solution based on the phase composition of cement hydrates with supplementary cementitious materials and its relation to suppressing ASR expansion.” Journal of Advanced Concrete Technology, 13, 538-553.10.3151/jact.13.538 ↗
15. 15) Kawabata, Y., Yamada, K. and Matsushita, H., (2007). “Petrological study on evaluation of alkali-silica reactivity and expansion analysis of andesite.” Journal of JSCE, Ser. E, 63, 689-703. (in Japanese)10.2208/jsceje.63.689 ↗
16. 16) Kawabata, Y., Yamada, K. and Matsushita, H., (2008). “Alkali-silica reactivity and expansion of mortar incorporating glassy andesite in alkaline solution.” 13th International Conference on Alkali-Aggregate Reaction in Concrete, 874-883.
17. 17) Kawamura, M., Koike, M. and Nakano, K., (1989). “Release of alkalis from reactive andesitic aggregates and fly ash into pore solution in mortars.” 8th International Conference on Alkali-Aggregate Reaction in Concrete, 271-278.
18. 18) Lu, D., Zhou, X., Xu, Z., Lan, X., Tang, M. and Fournier, B., (2006). “Evaluation of laboratory test method for determining the potential alkali contribution from aggregate and the ASR safety of the Three-Gorges dam concrete.” Cem. Concr. Res., 36, 1157-1165.10.1016/j.cemconres.2006.01.004 ↗
19. 19) Menéndez, E., García-Rovés, R., Aldea, B. and Ruíz, S., (2016). “Alkali release of aggregates. Effectiveness of different solutions and conditions of test” 15th International Conference on Alkali-Aggregate Reaction in Concrete, 15ICAAR2016_138.
20. 20) Shi, C., (2004). “A discussion of the paper ‘Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity.’ by M.-A. Berube, J. Duchesne, J. F. Dorion and M. Rivest.” Cem. Concr. Res., 34, 895.
21. 21) Sims, I., Nixon, P. and Godart, B., (2012). “Eliminating alkali-aggregate reaction from long-service structures.” 14th International Conference on Alkali-Aggregate Reaction in Concrete, 021811-SIMS.
22. 22) Soares, D., Santos Silva, A., Mirão, J., Fernandes, I. and Menéndez, E., (2016). “Study on the factors affecting alkalis release from aggregates into ASR.” 15th International Conference on Alkali-Aggregate Reaction in Concrete, 15ICAAR2016_135.
23. 23) Stevens, R. E. and Carron, M. K., (1948). “Simple field test for distinguishing minerals by abrasion pH.” Am. Mineralogist, 33, 31-49.
24. 24) Tang, M., (2004). “A discussion of the paper ‘Laboratory assessment of alkali contribution by aggregates to concrete and application to concrete structures affected by alkali-silica reactivity.’ by M.-A. Berube, J. Duchesne, J. F. Dorion and M. Rivest.” Cem. Concr. Res., 34, 901.
25. 25) Van Aardt, J. P. H. and Visser, S., (1977). “Calcium hydroxide attack on feldspars and clays: possible relevance to cement-aggregate reactions.” Cem. Concr. Res., 7, 643-648.10.1016/0008-8846(77)90046-1 ↗
26. 26) Wang, Y., Deng, M. and Tang, M., (2008a). “Alkali release from aggregate and the effect on AAR expansion.” Mat. and Struc., 41, 159-171.10.1617/s11527-007-9227-z ↗
27. 27) Wang, Y., Yu, G., Deng, M., Tang, M. and Lu, D., (2008b). “The use of thermodynamic analysis in assessing alkali contribution by alkaline minerals in concrete.” Cem. Concr. Res., 30, 353-359.10.1016/j.cemconcomp.2007.03.003 ↗