Influence of Longitudinal Bar Corrosion on Shear Behavior of RC Beams
Source abstract
Abstract
There have been few reports on the shear behavior of reinforced concrete (RC) beams with corroded longitudinal bars, and the influence of longitudinal bar corrosion has yet to be quantified. Given this background, experimental investigations were conducted to investigate the shear behavior of RC beams with corroded longitudinal bars, in which parameters such as corrosion level and shear-span-to-effective-depth-ratio were taken into consideration. Analytical investigations were also performed to evaluate the load-carrying mechanism of these specimens. The investigational results indicate that the shear behavior of RC beams is influenced not only by the corrosion level of the longitudinal bars but also by the shear-span-to-effective-depth-ratio (a/d). Based on these experimental results, a modified equation capable of calculating the shear capacity of RC beams with corroded longitudinal bars was proposed and its validity was proved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Environmental Engineering, School of creative Science and Engineering, Waseda University, Japan.
References (17)
Show source-provided references
1. Dörr, K. (1980). “Ein Beitrag zur Berechnung von Stahlbetonscheiben unter besonderer Berücksichtigung des Verbundverhaltens.” Thesis (PhD). University of Darmstadt.
2. Fenwick, R. C. and Paulay, T. (1968). “Mechanisms of shear resistance of concrete beams.” Journal of the Structural Division, ASCE, 94(ST10), 2235-2350.
3. Hashimoto, K., Morikawa, H. and Kobayasi, H. (2003). “Evaluation of shear behavior of RC beams taking into consideration of reinforcement corrosion.” Proceedings of the Japan Concrete Institute, 25(2), 1009-1014. (in Japanese)
4. Hordijk, P. A. (1991). “Local approach to fatigue of concrete.” Thesis (PhD), Delft University of Technology.
5. Inoue, H., Xue, X. and Seki, H. (2004). “Influence of reinforcement corrosion on shear capacity.” JSCE Annual Journal of Materials, Concrete Structures and Pavements, 425-426. (in Japanese)
6. JSCE, (2006). “Structural performance of concrete structures with deteriorated materials-Concrete engineering series 71.” Tokyo: Japan Society of Civil Engineers.
7. JSCE, (2007). “Standard specification for design and construction of concrete structures.” Tokyo: Japan Society of Civil Engineers.
8. Kosa, K., Wakiyama, T., Nisioka, T. and Kobayasi, H. (2007). “Effect of shear span ratio on the fracture of deep beams.” Journal of Materials, Concrete Structures and Pavement, 62(4), 798-814. (in Japanese)10.2208/jsceje.62.798 ↗
9. Matsuo, T., Sakai, L., Matsumura, T. and Kanetsu, N. (2004). “Studies on the shear load carrying mechanism of RC beams with corroded reinforcement.” Concrete Journal, 15(2), 69-77. (in Japanese)
10. Niwa, J. (1983). “Shear equation of deep beams based on analysis.” Proceedings of JCI 2nd colloquium on shear analysis of RC structures, 119-128. (in Japanese)
11. Niwa, J., Yamata, H., Yokozawa, W. and Okamura, H. (1986). “Revaluation of the equation for shear strength of reinforced concrete beams without web reinforcement.” Journal of Materials, Concrete Structures and Pavement, (372), 167-176. (in Japanese)
12. Sahamitmongkol, R., Suwathanangkul, S., Phoothong, P. and Kato, Y. (2008). “Flexural behaviors of corroded flexural RC members with patch repair- Experiments & simulation.” Journal of Advanced Concrete Technology, 6(2), 317-336.10.3151/jact.6.317 ↗
13. Sato, Y., Yamamoto, T., Hattori, A. and Miyagawa, Y. (2003). “Influence of stirrups and longitudinal bars corrosion on shear behavior of RC members.” Proceedings of the Japan Concrete Institute, 25(1), 821-826. (in Japanese)
14. Tadokoro, D., Sato, Y. and Ueta, T. (2006). “Shear Transferring Mechanism Along Diagonal Cracks and Diagonal Tension Failure Behavior of RC Members.” Journal of Materials, Concrete Structures and Pavement, (739)V-60, 195-211. (in Japanese)
15. Tanabe, T., Higai, T., Umehara, H. and Niwa, J. (2000). “Concrete structure.” 4th ed. Tokyo: Asakura Publishing Co., Ltd. (in Japanese)
16. Xue, X. and Seki, H. (2005). “Influence of reinforcement corrosion on shear capacity. ” JSCE Annual Journal of Materials, Concrete Structures and Pavements, 1057-1058. (in Japanese)
17. Yamamoto, T., Sato, Y., Hattori, A. and Miyagawa, T. (2005). “Studies on the shear behavior of RC beams with corroded reinforcement.” Proceedings of the Japan Concrete Institute, 27(1), 913-918. (in Japanese)