Simplified Prediction of Drying Shrinkage Stress in Reinforced Concrete Building Wall
Source abstract
Abstract
This paper proposes a simplified prediction model for drying shrinkage stress in a concrete building wall externally re-strained by beams. This prediction model is a uniaxial model with an effective Young's modulus method based on the following three assumptions: (1) the equilibrium condition of forces between a wall and restraining beams, (2) equal restraining effect between the upper and lower beams, and (3) Bernoulli-Euler hypothesis for the strains in the entire cross-sectional areas of the members. The accuracy of this model was verified using five types of reinforced concrete walls constructed using three kinds of coarse aggregates, namely, normal coarse aggregate and recycled coarse aggregate of grade 1 and grade 3. The elastic modulus, drying shrinkage strains and creep coefficients of concrete specimens were measured. Furthermore, control concrete walls and beams were also constructed in order to measure the free shrinkage strains of concrete elements. Based on these mechanical properties, the shrinkage stresses in the walls were well simulated by the proposed model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Properties and Behavior · Fire effects on concrete materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Architecture, Ashikaga Institute of Technology, Tochigi, Japan.
References (5)
Show source-provided references
1. CEB-FIP (1990). “CEB-FIP model code 1990” fédération internationale du béton, 2.
2. Imamoto, K., Kimura, Y., Nagayam, M. and Tamura, H. (2004). “Deflections and cracks in recycled coarse aggregate concrete members processed by decompression and rapid release.” RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development, College of Engineering, Nihon University, Koriyama, Japan, 171-178.
3. Ito, H., Maruyama, I., Tanimura, M. and Sato, R. (2004). “Early age deformation and resultant induced stress in expansive high strength concrete.” Journal of Advanced Concrete Technology, 2(2), 155-174.10.3151/jact.2.155 ↗
4. Neville, A. M., Dilger, W. H. and Brooks, J. J. (1983). “Creep of plain and structural concrete.” Construction Press, Longman, 246-255.
5. Sato, R., Dilger, W. H. and Ujike, I. (1994). “Deformations and thermal stresses of concrete beams constructed in two stages.” Proceedings of the International Symposium on Thermal Cracking in Concrete at Early Ages, RILEM, 313-320.