A Pointwise Model Based on a Total Strain Approach to Simulate Long-term Concrete Behaviour
Source abstract
Abstract
Ensuring the durability of reinforced concrete structures through numerical analysis requires addressing complex multiphysics phenomena that govern the evolution of volumetric deformations, strength and stiffness. The global structural response is significantly influenced by spatially varying properties, highlighting the need for advanced numerical tools to accurately account for these localized effects. This paper presents a pointwise thermo-hygro-mechanical (THM) model for 3D finite element simulations designed to perform numerical analysis of concrete behaviour throughout its service life. The mechanical properties of concrete are modelled based on the local hygrothermal properties. Concrete maturity is simulated using the equivalent age concept. The viscoelastic behaviour of concrete is described through the microprestress solidification theory. Key innovation is a new algorithm for integrating time-dependent mechanical properties into total strain crack models, assuming adaptive stress-strain relationships incorporating rotating and fixed crack concepts. The pointwise THM model is validated at the structural level through numerical simulations of experimental tests in reinforced concrete (RC) elements, assessing its ability to predict early-age stresses, crack patterns in thick members, and long-term shrinkage effects on the crack opening. Conclusions are based on the model’s efficacy in simulating the structural response of RC structures from early ages through their service life.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Geotechnical Engineering and Analysis · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CONSTRUCT, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
University of Minho, ISISE, ARISE, Department of Civil Engineering, Guimarães, Portugal.
Institute of Structural Concrete, Graz University of Technology, Graz, Austria.
References (81)
Show source-provided references
1. 1) Acker, P., & Ulm, F.-J. (2001). Creep and shrinkage of concrete: Physical origins and practical measurements. Nuclear Engineering and Design, 203(2-3), 143-158.10.1016/S0029-5493(00)00304-6 ↗
2. 2) Azenha, M. (2009). Numerical simulation of the structural behaviour of concrete since its early ages. Thesis (Doctoral). University of Porto.
3. 3) Azenha, M., Kanavaris, F., Schlicke, D., Jędrzejewska, A., Benboudjema, F., Honorio, T., Šmilauer, V., Serra, C., Forth, J., Kyle Riding, K., Khadka, B., Sousa, C., Briffaut, M., Lacarrière, L., Koenders, E., Kanstad, T., Klausen, A., Torrenti, J.-M., & Eduardo Fairbairn, M. R. (2021). Recommendations of RILEM TC 287-CCS: Thermo-chemo-mechanical modelling of massive concrete structures towards cracking risk assessment. Materials and Structures, 54(4), 1-13.10.1617/s11527-021-01732-8 ↗
4. 4) Azenha, M., Sousa, C., Faria, R., & Neves, A. (2011). Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures. Engineering Structures, 33(12), 3442-3453.10.1016/j.engstruct.2011.07.008 ↗
5. 5) Baggio, P., Majorana, C. E., & Schrefler, B. A. (1995). Thermo‐hygro‐mechanical analysis of concrete. International Journal for Numerical Methods in Fluids, 20(6), 573-595.10.1002/fld.1650200611 ↗
6. 6) Bary, B., Ranc, G., Durand, S., & Carpentier, O. (2008). A coupled thermo-hydro-mechanical-damage model for concrete subjected to moderate temperatures. International Journal of Heat and Mass Transfer, 51(11-12), 2847-2862.10.1016/j.ijheatmasstransfer.2007.09.021 ↗
7. 7) Bažant, Z. P. (1995). Creep and damage in concrete. In: S. Mindess & J. F. Young, Eds. Materials Science of Concrete IV. Cambridge, Massachusetts: Academic Press, 355-389.
8. 8) Bažant, Z. P., & Baweja, S. (2000). Creep and shrinkage prediction model for analysis and design of concrete structures: Model B3. In: The Adam Neville Symposium: Creep and Shrinkage - Structural Design Effects (ACI SP-194). Farmington Hills, Michigan: American Concrete Institute, 1-84.
9. 9) Bažant, Z. P., & Chern, J. (1985). Concrete creep at variable humidity: Constitutive law and mechanism. Materials and Structures, 18(1), 1-20.10.1007/BF02473360 ↗
10. 10) Bažant, Z. P., & Jirásek, M. (2018). Creep and hygrothermal effects in concrete structures. Dordrecht: Springer Science & Business Media.10.1007/978-94-024-1138-6 ↗
11. 11) Bažant, Z. P., & L'Hermite, R. (1988). Mathematical modeling of creep and shrinkage of concrete. Chichester, West Sussex: John Wiley & Sons.
12. 12) Bažant, Z. P., & Oh, B. H. (1983). Crack band theory for fracture of concrete. Materials and Structures, 16(3), 155-177.10.1007/BF02486267 ↗
13. 13) Bažant, Z. P., & Prasannan, S. (1989). Solidification theory for concrete creep. I: Formulation. Journal of Engineering Mechanics, 115(8), 1691-1703.10.1061/(ASCE)0733-9399(1989)115:8(1691) ↗
14. 14) Bažant, Z. P., & Xi, Y. (1994). Drying creep of concrete: Constitutive model and new experiments separating its mechanisms. Materials and Structures, 27(1), 3-14.10.1007/BF02472815 ↗
15. 15) Bažant, Z. P., Hauggaard, A. B., & Baweja, S. (1997a). Microprestress-solidification theory for concrete creep. II: Algorithm and verification. Journal of Engineering Mechanics, 123(11), 1195-1201.10.1061/(ASCE)0733-9399(1997)123:11(1195) ↗
16. 16) Bažant, Z. P., Hauggaard, A. B., Baweja, S., & Ulm, F.-J. (1997b). Microprestress-solidification theory for concrete creep. I: Aging and drying effects. Journal of Engineering Mechanics, 123(11), 1188-1194.10.1061/(ASCE)0733-9399(1997)123:11(1188) ↗
17. 17) Benboudjema, F. (2002). Modélisation des déformations différées du béton sous sollicitations biaxiales. Application aux enceintes de confinement de bâtiments réacteurs des centrales nucléaires. Thesis (Doctoral). Université de Marne la Vallée. (in French)
18. 18) Benboudjema, F., Meftah, F., & Torrenti, J.-M. (2005). Interaction between drying, shrinkage, creep and cracking phenomena in concrete. Engineering Structures, 27(2), 239-250.10.1016/j.engstruct.2004.09.012 ↗
19. 19) Bissonnette, B., Pierre, P., & Pigeon, M. (1999). Influence of key parameters on drying shrinkage of cementitious materials. Cement and Concrete Research, 29(10), 1655-1662.10.1016/S0008-8846(99)00156-8 ↗
20. 20) Borst, R., & Nauta, P. (1985). Non‐orthogonal cracks in a smeared finite element model. Engineering Computations, 2(1), 35-46.10.1108/eb023599 ↗
21. 21) Borst, R., Crisfield, M. A., Remmers, J. J., & Verhoosel, C. V. (2012). Nonlinear finite element analysis of solids and structures. Chichester, West Sussex: John Wiley & Sons.10.1002/9781118375938 ↗
22. 22) Bottoni, M. (2015). Relation de comportement BETON_BURGER_FP pour le fluage du béton. (Report No. R7.01.35). Paris: Électricité de France SA (EDF). (in French)
23. 23) Cervera, M., Oliver, J., & Prato, T. (1999a). Thermo-chemo-mechanical model for concrete. I: Hydration and aging. Journal of Engineering Mechanics, 125(9), 1018-1027.10.1061/(ASCE)0733-9399(1999)125:9(1018) ↗
24. 24) Cervera, M., Oliver, J., & Prato, T. (1999b). Thermo-chemo-mechanical model for concrete. II: Damage and creep. Journal of Engineering Mechanics, 125(9), 1028-1039.10.1061/(ASCE)0733-9399(1999)125:9(1028) ↗
25. 25) De Schutter, G., & Taerwe, L. (1995). General hydration model for Portland cement and blast furnace slag cement. Cement and Concrete Research, 25(3), 593-604.10.1016/0008-8846(95)00048-H ↗
26. 26) Delamonte, A., Charpin, L., & Helfer, T. (2021). The Burger_EDF_CIWAP_2021 constitutive law for concrete creep and shrinkage. Paris: Électricité de France SA (EDF).
27. 27) DIANA. (2016). DIANA software user's manual version 10. 2. Delft: Diana FEA BV.
28. 28) CEN. (1994). Eurocode 2: Design of concrete structures (EN 1992-1-1). Brussels: European Committee for Standardization (CEN).
29. 29) Faria, R., Azenha, M., & Figueiras, J. A. (2006). Modelling of concrete at early ages: Application to an externally restrained slab. Cement and Concrete Composites, 28(6), 572-585.10.1016/j.cemconcomp.2006.02.012 ↗
30. 30) Ferreira, C., Schlicke, D., Sousa, C., & Azenha, M. (2023). Early-age to long-term numerical simulation of concrete members tested in adjustable restraining frames. In: International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures. Milos Island 14-16 June 2023. Dordrecht: Springer Science and Business Media B.V., 995-1007.10.1007/978-3-031-33211-1_89 ↗
31. 31) Ferreira, C., Schlicke, D., Sousa, C., Gomes, J., Faria, R., & Azenha, M. (2021). Validation of thermo-hygro-mechanical FEM analysis of thick restrained RC members by comparison with experiments. In: International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures. Paris 9 April 2021. Cham: Springer Nature Switzerland AG., 291-303.10.1007/978-3-030-72921-9_24 ↗
32. 32) Ferreira, C., Sousa, C., Faria, R., Azenha, M., & Pimentel, M. (2019). Thermo-hygro-mechanical simulation of cracking in thick restrained RC members: Application to a 50 cm thick slab. Journal of Advanced Concrete Technology, 17(8), 489-505.10.3151/jact.17.489 ↗
33. 33) fib. (2013). Model code for concrete structures 2010. Lausanne: Fédération Internationale du Béton (fib).10.1002/9783433604090 ↗
34. 34) Flatt, R. J., Scherer, G. W., & Bullard, J. W. (2011). Why alite stops hydrating below 80% relative humidity. Cement and Concrete Research, 41(9), 987-992.10.1016/j.cemconres.2011.06.001 ↗
35. 35) Gasch, T., Malm, R., & Ansell, A. (2016). A coupled hygro-thermo-mechanical model for concrete subjected to variable environmental conditions. International Journal of Solids and Structures, 91, 143-156.10.1016/j.ijsolstr.2016.03.004 ↗
36. 36) Gawin, D., Pesavento, F., & Schrefler, B. A. (2006a). Hygro‐thermo‐chemo‐mechanical modelling of concrete at early ages and beyond. Part I: Hydration and hygro‐thermal phenomena. International Journal for Numerical Methods in Engineering, 67(3), 299-331.10.1002/nme.1615 ↗
37. 37) Gawin, D., Pesavento, F., & Schrefler, B. A. (2006b). Hygro‐thermo‐chemo‐mechanical modelling of concrete at early ages and beyond. Part II: Shrinkage and creep of concrete. International Journal for Numerical Methods in Engineering, 67(3), 332-363.10.1002/nme.1636 ↗
38. 38) Granger, L. (1995). Comportement différé du béton dans les enceintes de centrales nucléaires: Analyse et modélisation. Thesis (Doctoral). Ecole Nationale des ponts et Chaussées. (in French)
39. 39) Grasberger, S., & Meschke, G. (2004). Thermo-hygro-mechanical degradation of concrete: From coupled 3D material modelling to durability-oriented multifield structural analyses. Materials and Structures, 37(4), 244-256.10.1007/BF02480633 ↗
40. 40) Guénot-Delahaie, I. (1996). Contribution à l'analyse physique et à la modélisation du fluage propre du béton. Thesis (Doctoral). Ecole Nationale des Ponts et Chaussées. (in French)
41. 41) Havlásek, P. (2014). Creep and shrinkage of concrete subjected to variable environmental conditions. Thesis (Doctoral). Czech University of Technology.
42. 42) He, W., Wu, Y.-F., Liew, K., & Wu, Z. (2006). A 2D total strain based constitutive model for predicting the behaviors of concrete structures. International Journal of Engineering Science, 44(18-19), 1280-1303.10.1016/j.ijengsci.2006.07.007 ↗
43. 43) Jensen, O. M. (1995). Thermodynamic limitation of self-desiccation. Cement and Concrete Research, 25(1), 157-164.10.1016/0008-8846(94)00123-G ↗
44. 44) Jensen, O. M., Hansen, P. F., Lachowski, E. E., & Glasser, F. P. (1999). Clinker mineral hydration at reduced relative humidities. Cement and Concrete Research, 29(9), 1505-1512.10.1016/S0008-8846(99)00132-5 ↗
45. 45) Jirásek, M., & Havlásek, P. (2014a). Accurate approximations of concrete creep compliance functions based on continuous retardation spectra. Computers & Structures, 135, 155-168.10.1016/j.compstruc.2014.01.024 ↗
46. 46) Jirásek, M., & Havlásek, P. (2014b). Microprestress–solidification theory of concrete creep: Reformulation and improvement. Cement and Concrete Research, 60, 51-62.10.1016/j.cemconres.2014.03.008 ↗
47. 47) Jirásek, M., & Zimmermann, T. (1998a). Analysis of rotating crack model. Journal of Engineering Mechanics, 124(8), 842-851.10.1061/(ASCE)0733-9399(1998)124:8(842) ↗
48. 48) Jirásek, M., & Zimmermann, T. (1998b). Rotating crack model with transition to scalar damage. Journal of Engineering Mechanics, 124(3), 277-284.10.1061/(ASCE)0733-9399(1998)124:3(277) ↗
49. 49) Kanstad, T., Hammer, T. A., Bjøntegaard, Ø., & Sellevold, E. J. (2003a). Mechanical properties of young concrete: Part I: Experimental results related to test methods and temperature effects. Materials and Structures, 36, 218-225.10.1007/BF02479614 ↗
50. 50) Kanstad, T., Hammer, T. A., Bjøntegaard, Ø., & Sellevold, E. J. (2003b). Mechanical properties of young concrete: Part II: Determination of model parameters and test program proposals. Materials and Structures, 36, 226-230.10.1007/BF02479615 ↗
51. 51) Kwak, H.-G., Ha, S.-J., & Kim, J.-K. (2006). Non-structural cracking in RC walls: Part I. Finite element formulation. Cement and Concrete Research, 36(4), 749-760.10.1016/j.cemconres.2005.12.001 ↗
52. 52) Lempriere, B. (1968). Poisson's ratio in orthotropic materials. AIAA Journal, 6(11), 2226-2227.10.2514/3.4974 ↗
53. 53) Maekawa, K., Ishida, T., & Kishi, T. (2003). Multi-scale modeling of concrete performance integrated material and structural mechanics. Journal of Advanced Concrete Technology, 1(2), 91-126.10.3151/jact.1.91 ↗
54. 54) Maekawa, K., Ishida, T., & Kishi, T. (2008). Multi-scale modeling of structural concrete. London: CRC Press.10.1201/9781482288599 ↗
55. 55) Mazars, J., & Pijaudier-Cabot, G. (1989). Continuum damage theory - Application to concrete. Journal of Engineering Mechanics, 115(2), 345-365.10.1061/(ASCE)0733-9399(1989)115:2(345) ↗
56. 56) Mullin, J. W. (2001). Crystallization. Oxford: Butterworth-Heinemann.10.1016/B978-075064833-2/50009-7 ↗
57. 57) Nguyen, D. H., & Dao, V. T. (2018). A novel approach to estimate the evolution of fracture energy and tensile softening curve of concrete from very early age. Engineering Fracture Mechanics, 196, 43-55.10.1016/j.engfracmech.2018.02.026 ↗
58. 58) Powers, T. C. (1948). A discussion of cement hydration in relation to the curing of concrete. Highway Research Board Proceedings, 27, 178-188.
59. 59) Quarteroni, A., Sacco, R., & Saleri, F. (2010). Numerical mathematics. Berlin and Heidelberg: Springer Science & Business Media.
60. 60) Rahimi-Aghdam, S., Bažant, Z. P., & Cusatis, G. (2019). Extended microprestress-solidification theory for long-term creep with diffusion size effect in concrete at variable environment. Journal of Engineering Mechanics, 145(2), 04018131.10.1061/(ASCE)EM.1943-7889.0001559 ↗
61. 61) Rahimi-Aghdam, S., Bažant, Z. P., & Qomi, M. A. (2017). Cement hydration from hours to centuries controlled by diffusion through barrier shells of CSH. Journal of the Mechanics and Physics of Solids, 99, 211-224.10.1016/j.jmps.2016.10.010 ↗
62. 62) Riggs, H. R., & Powell, G. H. (1986). Rough crack model for analysis of concrete. Journal of Engineering Mechanics, 112(5), 448-464.10.1061/(ASCE)0733-9399(1986)112:5(448) ↗
63. 63) Rots, J. G. (1988). Computational modeling of concrete fracture. Thesis (Doctoral). Delft University of Technology.
64. 64) Rots, J. G., & Blaauwendraad, J. (1989). Crack models for concrete, discrete or smeared? Fixed, multi-directional or rotating? HERON, 34(1), 1-59.
65. 65) Rots, J. G., Nauta, P., Kuster, G., & Blaauwendraad, J. (1985). Smeared crack approach and fracture localization in concrete. HERON, 30(1), 1-58.
66. 66) Ruetz, W. (1964). Das Kriechen des Zementsteins im Beton und seine Beeinflussung durch gleichzeitiges Schwinden. Berlin: Ernst & Sohn GmbH. (in German)
67. 67) Schlicke, D., Hofer, K., & Tue, N. V. (2020). Adjustable restraining frames for systematic investigation of cracking risk and crack formation in reinforced concrete under restrained conditions. In: M. Serdar, I. Gabrijel, D. Schlicke, S. Staquet, & M. Azenha, Eds. Advanced Techniques for Testing of Cement-Based Materials. Cham: Springer International Publishing, 211-239.10.1007/978-3-030-39738-8_7 ↗
68. 68) Selby, R. G., & Vecchio, F. J. (1997). A constitutive model for analysis of reinforced concrete solids. Canadian Journal of Civil Engineering, 24(3), 460-470.10.1139/l96-135 ↗
69. 69) Sellier, A., & Buffo-Lacarrière, L. (2009). Vers une modélisation simple et unifiée du fluage propre, du retrait et du fluage en dessiccation du béton. European Journal of Environmental and Civil Engineering, 13(10), 1161-1182. (in French)10.1080/19648189.2009.9693184 ↗
70. 70) Ulm, F.-J., & Coussy, O. (1995). Modeling of thermochemomechanical couplings of concrete at early ages. Journal of Engineering Mechanics, 121(7), 785-794.10.1061/(ASCE)0733-9399(1995)121:7(785) ↗
71. 71) Ulm, F.-J., & Coussy, O. (1998). Couplings in early-age concrete: From material modeling to structural design. International Journal of Solids and Structures, 35(31-32), 4295-4311.10.1016/S0020-7683(97)00317-X ↗
72. 72) Ulm, F.-J., Le Maou, F., & Boulay, C. (1999). Creep and shrinkage coupling: New review of some evidence. Revue Française de Génie Civil, 3(3-4), 21-37.
73. 73) Van Zijl, G. (1999). Computational modelling of masonry creep and shrinkage. Thesis (Doctoral). Delft University of Technology.
74. 74) Vecchio, F. J., & Collins, M. P. (1986). The modified compression-field theory for reinforced concrete elements subjected to shear. ACI Journal, 83(2), 219-231.10.14359/10416 ↗
75. 75) William, K., Pramono, E., & Sture, S. (1987). Fundamental issues of smeared crack models. In: SEM-RILEM International Conference on Fracture of Concrete and Rock. Houston 17-19 June 1987. New York: Springer-Verlag New York Inc.
76. 76) Wittmann, F. H. (1982). Creep and shrinkage mechanisms. In: Z. P. Bažant Ed. Creep and Shrinkage in Concrete Structures. Chichester, West Sussex: John Wiley & Sons.
77. 77) Wyrzykowski, M., & Lura, P. (2016). Effect of relative humidity decrease due to self-desiccation on the hydration kinetics of cement. Cement and Concrete Research, 85, 75-81.10.1016/j.cemconres.2016.04.003 ↗
78. 78) Xi, Y., Bažant, Z. P., & Jennings, H. M. (1994a). Moisture diffusion in cementitious materials adsorption isotherms. Advanced Cement Based Materials, 1(6), 248-257.10.1016/1065-7355(94)90033-7 ↗
79. 79) Xi, Y., Bažant, Z. P., Molina, L., & Jennings, H. M. (1994b). Moisture diffusion in cementitious materials moisture capacity and diffusivity. Advanced Cement Based Materials, 1(6), 258-266.10.1016/1065-7355(94)90034-5 ↗
80. 80) Yu, P., Duan, Y., Fan, Q., & Tang, S. (2020). Improved MPS model for concrete creep under variable humidity and temperature. Construction and Building Materials, 243, 118183.10.1016/j.conbuildmat.2020.118183 ↗
81. 81) Zahabizadeh, B., Edalat-Behbahani, A., Granja, J., Gomes, J. G., Faria, R., & Azenha, M. (2019). A new test setup for measuring early age coefficient of thermal expansion of concrete. Cement and Concrete Composites, 98, 14-28.10.1016/j.cemconcomp.2019.01.014 ↗