journal article·2009-02-26Open access

Macro-cell Corrosion in Reinforcement of Concrete under Non-homogeneous Chloride Environment

Ominda Nanayakkara, Yoshitaka Kato

Abstract

This research study was carried out to identify the behavior of macro-cell corrosion when the embedded steel of concrete specimens is exposed to the effect of homogeneous and non-homogeneous chloride environments. Macro-cell corrosion currents were periodically measured using a segmented steel bar. Results show that macro-cell corrosion can be observed even when the surrounding chloride environment is homogenous. When the chloride environment is non-homogeneous, higher macro-cell corrosion activity was observed between steel segments exposed to different levels of chloride contents. Macro-cell corrosion activity becomes more significant when the difference in chloride content is increased. It was also observed that the macro-cell anodic and cathodic reactions periodically change their overall electrochemical behavior from anodic to cathodic or cathodic to anodic. It is proposed that the time dependent variation of macro-cell corrosion occurs due to the spatial variation of oxygen and moisture concentrations caused by an ongoing corrosion process that is briefly explained in this paper.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Graduate School of Engineering, University of Tokyo, Japan.

International Center for Urban Safety Engineering, Institute of Industrial Science, University of Tokyo, Japan.

References (10)

Show source-provided references
1. Elsener, B. (2002). “Macrocell corrosion of steel in concrete-implications for corrosion monitoring.” Cement and Concrete Composites, 24(1), 65-72.10.1016/S0958-9465(01)00027-0 ↗
2. JSCE, (2002). “Standard specification for concrete structures-material and construction.” Tokyo: Japan Society of Civil Engineers.
3. Miyazato, S., Otsuki, N. and Kimura, H. (2001). “Steel corrosion induced by chloride ions and carbonation in mortar with bending cracks and joints.&rdquo10.2208/jscej.2001.690_83 ↗
4. Second International Conference on Engineering Materials, California 16-19 August 2001, (2), 531-542.
5. Miyazato, S. (2001). “Macro-cell corrosion induced by chloride and carbonation in reinforced concrete with defects.” Thesis (PhD), Tokyo Institute of Technology. (in Japanese)
6. Mohammed, T. U. and Hamada, H. (2006a). “Corrosion of horizontal bars in concrete and method to delay early corrosion.” ACI Materials Journal, 103(5), 303-311.10.14359/18151 ↗
7. Mohammed, T. U. and Hamada, H. (2006b). “Corrosion of steel bars in cracked concrete at the early age of exposure.” International Workshop on Life Cycle Management of Coastal Concrete Structures, Nagaoka 2-3 November 2006, Port and Airport Research Institute, 115-126.
8. Mohammed, T. U., Otsuki, N., Hamada, H. and Yamaji, T. (2002). “Chloride-induced corrosion of steel bars in concrete with presence of gap at steel-concrete interface.” ACI Materials Journal, 99(2), 149-156.
9. Raupach, M. (1996). “Chloride-induced macrocell corrosion of steel in concrete-theoretical background and practical sequences.” Construction and Building Materials, 10(5), 329-338.10.1016/0950-0618(95)00018-6 ↗
10. Raupach, M. (2006). “Patch repairs on reinforced concrete structures-Model investigations on the required size and practical consequences.” Cement and Concrete Composites, 28(8), 679-684.10.1016/j.cemconcomp.2006.05.016 ↗