Method for Improving Interfacial Bonding Performance of Functionally Graded Concrete: A Molding Technique Based on Frozen Mortar Transition Layer
Source abstract
Abstract
Existing functionally graded concrete structures are prone to weak interfacial zones due to sequential casting. To address this, this study presents a construction method integrating liquid nitrogen-frozen concrete with normal concrete. The core objective is to investigate the influencing factors and laws of interfacial bonding, and to clarify the interfacial bonding mechanism of the composite system. In this approach, fresh mortar is rapidly frozen into solid blocks via liquid nitrogen to halt cement hydration, and then co-cast with subsequent fresh mortar for molding. The splitting tensile strength, compressive strength and microstructural characteristics of composite specimens under different temperatures were tested. Techniques including scanning electron microscopy, microhardness testing and temperature monitoring were employed to reveal the interfacial hydration mechanism. The results indicate that with appropriate temperature control, the interfacial bonding strength of the pre-frozen composite mortar is comparable to that of monolithic cast mortar. These findings are expected to alleviate the problem of weak interfacial bonding in functionally graded concrete, realize the integral forming of graded structures, and can be applied to practical engineering scenarios such as anti-scouring of functionally graded bridge piers and anti-cracking of concrete graded structures in high-altitude regions in the future.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Architecture & Environment, Sichuan University, Chengdu 610065, PR China.
References (72)
Show source-provided references
1. 1) Abdulsalam, M., Gao, N., Webler, B. A., & Holm, E. A. (2021). Prediction of inclusion types from BSE images: RF vs. CNN. Frontiers in Materials, 8, 754089.10.3389/fmats.2021.754089 ↗
2. 2) Alesiani, M., Pirazzoli, I., & Maraviglia, B. (2007). Factors affecting early-age hydration of ordinary Portland cement studied by NMR: Fineness, water-to-cement ratio and curing temperature. Applied Magnetic Resonance, 32(3), 385-394.10.1007/s00723-007-0019-y ↗
3. 3) Benmalek, H., Bouziane, S., Bouzerd, H., & Suleiman, H. (2024). Innovative mixed finite element method for bending analysis of functionally graded beams: Modelling, validation, and applications. Engineering Research Express, 6(1), 015020.10.1088/2631-8695/ad1f16 ↗
4. 4) Bin Ahmed, F., Biswas, R. K., Ahsan, K. A., Islam, S., & Rahman, M. R. (2021). Estimation of strength properties of geopolymer concrete. Materials Today: Proceedings, 44, 871-877.10.1016/j.matpr.2020.10.790 ↗
5. 5) Bonaldo, E., Barros, J. A. O., & Lourenço, P. B. (2005). Bond characterization between concrete substrate and repairing SFRC using pull-off testing. International Journal of Adhesion and Adhesives, 25(6), 463-474.10.1016/j.ijadhadh.2005.01.002 ↗
6. 6) Chen, C., Mao, J., Ren, J., Shi, S., & Dai, F. (2024). Liquid nitrogen frozen cementitious material and its potential applications: Inspired by refrigeration industry. Construction and Building Materials, 440, 137512.10.1016/j.conbuildmat.2024.137448 ↗
7. 7) Chen, X., Zhuge, Y., Al-Gemeel, A. N., & Xiong, Z. (2021). Compressive behaviour of concrete column confined with basalt textile reinforced ECC. Engineering Structures, 243, 112643.10.1016/j.engstruct.2021.112651 ↗
8. 8) Dandapat, R., & Deb, A. (2016). A probability based model for the erosive wear of concrete by sediment bearing water. Wear, 350-351, 166-181.10.1016/j.wear.2016.01.012 ↗
9. 9) de Carvalho, P. P. M., & de Melo Lameiras, R. (2025). Test methods for the post-cracking behavior of the FRC in tension: A state-of-the-art review. International Journal of Concrete Structures and Materials, 19(1), 32.10.1186/s40069-024-00702-y ↗
10. 10) Duan, P., Shui, Z., Chen, W., & Shen, C. (2013). Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete. Construction and Building Materials, 44, 1-6.10.1016/j.conbuildmat.2013.02.075 ↗
11. 11) Emmanuel, A. C., Krishnan, S., & Bishnoi, S. (2022). Influence of curing temperature on hydration and microstructural development of ordinary Portland cement. Construction and Building Materials, 329, 127070.10.1016/j.conbuildmat.2022.127070 ↗
12. 12) Fan, D., Lu, J.-X., Liu, K., Ban, J., Yu, R., & Poon, C. S. (2024). Multi-scale design of ultra-high performance concrete (UHPC) composites with centroplasm theory. Composites Part B: Engineering, 281, 111561.10.1016/j.compositesb.2024.111562 ↗
13. 13) Fan, W., Mao, J., Jin, W., Zhang, J., Li, Q., & Yuan, F. (2022). Repair effect of cracked reinforced concrete based on electrochemical rehabilitation technology. Journal of Building Engineering, 61, 105211.10.1016/j.jobe.2022.105211 ↗
14. 14) Fan, W., Mao, J., Jin, W., Zhang, J., & Zhong, X. (2021). Study on the durability improvement of cracked concrete based on bidirectional electromigration rehabilitation. Construction and Building Materials, 278, 122335.10.1016/j.conbuildmat.2021.122453 ↗
15. 15) Feng, K., Pan, J., Xing, W., Li, M., Geng, J., & He, C. (2023). Experimental study on the high water pressure erosion mechanism and its influence on the submarine shield tunnel concrete segments. Construction and Building Materials, 408, 133720.10.1016/j.conbuildmat.2023.133577 ↗
16. 16) Guan, D., Peng, Z., Chen, Z., & Liu, J. (2023). Experimental investigation of interfacial shear behavior between engineered cementitious composite and normal concrete. Case Studies in Construction Materials, 19, e02394.10.1016/j.cscm.2023.e02666 ↗
17. 17) Hamada, H. M., Shi, J., Abed, F., Al Jawahery, M. S., Majdi, A., & Yousif, S. T. (2023). Recycling solid waste to produce eco-friendly ultra-high performance concrete: A review of durability, microstructure and environment characteristics. Science of the Total Environment, 876, 162796.10.1016/j.scitotenv.2023.162804 ↗
18. 18) Han, F., Zou, K., Su, G., & Jiao, S. (2025). Research on the temperature field and temperature control measures of large volume concrete of the foundation pier during the hydration heat release process in severe cold regions. Buildings, 15(10), 1586.10.3390/buildings15101627 ↗
19. 19) Herrmann, M., & Sobek, W. (2017). Functionally graded concrete: Numerical design methods and experimental tests of mass-optimized structural components. Structural Concrete, 18(1), 54-66.10.1002/suco.201600011 ↗
20. 20) Hu, X., Liu, L., Liao, M., Li, M., Lu, C., Yao, Z., Huang, Q., & Zhuang, M.-L. (2024a). Experimental investigations on the on-site crack control of pier concrete in high-altitude environments. Buildings, 14(11), 3521.10.3390/buildings14113445 ↗
21. 21) Hu, X., Xu, L., Li, M., Wang, J., Ran, B., Huang, R., Zhou, X., & Xiong, Y. (2024b). Effect of temperature and superplasticizer on hydration of C3S and carbonation products of C-S-H. Construction and Building Materials, 444, 137909.10.1016/j.conbuildmat.2024.137864 ↗
22. 22) Hu, Z., Elchalakani, M., Yehia, S., Ran, H., Sadakkathulla, M. A., & Guo, X. (2024c). Engineered cementitious composite (ECC) strengthening of reinforced concrete structures: A state-of-the-art review. Journal of Building Engineering, 86, 108941.10.1016/j.jobe.2024.108941 ↗
23. 23) Hung, C.-C., & Li, S.-H. (2013). Three-dimensional model for analysis of high performance fiber reinforced cement-based composites. Composites Part B: Engineering, 45(1), 1441-1447.10.1016/j.compositesb.2012.08.004 ↗
24. 24) Imanov, A. M., Kareken, G. T., Tukhtamisheva, A. Z., Ismailova, A. B., Moldamuratov, Z. N., & Rakhimova, G. M. (2025). Use of basic oxygen furnace slag (BOFS) in geopolymer mortar for modification of concrete in hydraulic structures: Stabilization properties and reduction of volume changes. Nanotechnologies in Construction, 17(3), 273-295.10.15828/2075-8545-2025-17-3-273-295 ↗
25. 25) Karagol, F., Demirboga, R., & Khushefati, W. H. (2015). Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions. Construction and Building Materials, 76, 388-395.10.1016/j.conbuildmat.2014.12.011 ↗
26. 26) Kim, M. O., & Bordelon, A. (2016). Fiber effect on interfacial bond between concrete and fiber-reinforced mortar. Transportation Research Record, 2591, 11-18.10.3141/2591-02 ↗
27. 27) Krstulovic, R., & Dabic, P. (2000). A conceptual model of the cement hydration process. Cement and Concrete Research, 30(5), 693-698.10.1016/S0008-8846(00)00231-3 ↗
28. 28) Li, F., Feng, Z., Deng, K., Yu, Y., Hu, Z., & Jin, H. (2019). Axial behavior of reinforced PP-ECC column and hybrid NSC-ECC column under compression. Engineering Structures, 195, 223-230.10.1016/j.engstruct.2019.06.010 ↗
29. 29) Li, N., Li, W., Lu, Y., & Li, S. (2023). Corroded reinforced concrete columns strengthened with basalt fibre reinforced ECC under axial compression. Composite Structures, 303, 116296.10.1016/j.compstruct.2022.116328 ↗
30. 30) Li, Q., Gao, X., Xu, S., Peng, Y., & Fu, Y. (2016). Microstructure and mechanical properties of high-toughness fiber-reinforced cementitious composites after exposure to elevated temperatures. Journal of Materials in Civil Engineering, 28(11), 04016127.10.1061/(ASCE)MT.1943-5533.0001647 ↗
31. 31) Li, X., Zhou, Z., Wang, C., Wang, X., Wang, K., Zhang, H., Dong, J., & Luo, D. (2024). Experimental study on the performance of ECC-ordinary concrete-steel bar cooperative bonding interface in link slab structure. Case Studies in Construction Materials, 21, e03561.10.1016/j.cscm.2024.e03970 ↗
32. 32) Li, Z., Zhu, H., Du, C., Gao, D., Yuan, J., & Wen, C. (2021). Experimental study on cracking behavior of steel fiber-reinforced concrete beams with BFRP bars under repeated loading. Composite Structures, 267, 113934.10.1016/j.compstruct.2021.113878 ↗
33. 33) Liang, N., Geng, S., Mao, J., Liu, X., & Zhou, X. (2024). Investigation on cracking resistance mechanism of basalt-polypropylene fiber reinforced concrete based on SEM test. Construction and Building Materials, 411, 134102.10.1016/j.conbuildmat.2023.134102 ↗
34. 34) Liu, Y., Mao, J., Liu, Y., Zhou, L., Dai, F., Luo, Z., & Yuan, M. (2025). Systematic study of bonding behavior at the aggregate-mortar interface: Analysis based on experimental and numerical models. Engineering Fracture Mechanics, 321, 111151.10.1016/j.engfracmech.2025.111151 ↗
35. 35) Lu, H., Bao, W., & Yin, Y. (2024). Durability deterioration mechanism and carbonation depth prediction model of tunnel lining concrete in high-altitude cold area under low-pressure-freeze-thaw conditions. Construction and Building Materials, 456, 138556.10.1016/j.conbuildmat.2024.139259 ↗
36. 36) Mao, J., Jia, H., Wu, K., Wang, Q., Li, S., Qian, W., & Xiong, F. (2023). A novel method to prevent frost cracking of perforated concrete components in cold regions. Cold Regions Science and Technology, 211, 103848.10.1016/j.coldregions.2023.103848 ↗
37. 37) Mi, L., Mao, J., Li, L., Shi, Q., Fang, K., Li, S., Deng, X., & Li, G. (2024). Microstructural damage and durability of plateau concrete: Insights into freeze-thaw resistance and improvement strategies. Structures, 60, 105888.10.1016/j.istruc.2024.105888 ↗
38. 38) MOHURD. (2009). Standard for test method of performance on building mortar (JGJ/T 70-2009). Beijing: Ministry of Housing and Urban-Rural Development of the People’s Republic of China.
39. 39) Momayez, A., Ehsani, M. R., Ramezanianpour, A. A., & Rajaie, H. (2005). Comparison of methods for evaluating bond strength between concrete substrate and repair materials. Cement and Concrete Research, 35(4), 748-757.10.1016/j.cemconres.2004.05.027 ↗
40. 40) Naebe, M., & Shirvanimoghaddam, K. (2016). Functionally graded materials: A review of fabrication and properties. Applied Materials Today, 5, 223-245.10.1016/j.apmt.2016.10.001 ↗
41. 41) Nam, J., Kim, G., Lee, B., Hasegawa, R., & Hama, Y. (2016). Frost resistance of polyvinyl alcohol fiber and polypropylene fiber reinforced cementitious composites under freeze-thaw cycling. Composites Part B: Engineering, 90, 241-250.10.1016/j.compositesb.2015.12.009 ↗
42. 42) Ouyang, J., Guo, R., Wang, X.-Y., Fu, C., Wan, F., & Pan, T. (2023). Effects of interface agent and cooling methods on the interfacial bonding performance of engineered cementitious composites (ECC) and existing concrete exposed to high temperature. Construction and Building Materials, 376, 131067.10.1016/j.conbuildmat.2023.131054 ↗
43. 43) Pan, C., Mao, J., Jin, W., Fan, W., & Zhu, D. (2020). Effects of environmental water-level changes and bidirectional electromigration rehabilitation on durability of concrete. Construction and Building Materials, 265, 120353.10.1016/j.conbuildmat.2020.120335 ↗
44. 44) Ren, J., Liu, J., Mao, J., Fang, K., & Xie, C. (2025). Enhancement on stability and strength of underwater concrete through liquid nitrogen freezing process: A sustainable approach for scour protection. Case Studies in Construction Materials, 22, e04125.10.1016/j.cscm.2025.e04737 ↗
45. 45) SAC. (2019). Standard for test methods of physical and mechanical properties of concrete (GB/T 50081-2019). Beijing: The Standardization Administration of the People’s Republic of China.
46. 46) SAC. (2021). Test method of cement mortar strength (ISO method) (GB/T 17671-2021). Beijing: The Standardization Administration of the People’s Republic of China.
47. 47) Shen, X., Feng, P., Liu, X., Wang, W., Zhang, Y., Zhou, Y., & Ran, Q. (2023). New insights into the non-classical nucleation of C-S-H. Cement and Concrete Research, 168, 107140.10.1016/j.cemconres.2023.107135 ↗
48. 48) Shi, L., Zheng, Z., Yao, Y., Li, Y., & Ma, X. (2025). The quaternary relationship between pore structure, hydration products, compressive strength, and thermal conductivity of autoclaved aerated concrete: A review. Journal of Building Engineering, 112, 111998.10.1016/j.jobe.2025.113720 ↗
49. 49) Si, R., Chu, H., Gao, W., Iroshan, A., Feng, J., Ji, H., & Liu, Y. (2025). Identification and classification of concrete based on laser-induced breakdown spectroscopy and laser-induced plasma acoustic signals. Spectroscopy Letters, (accepted for publication).10.1080/00387010.2025.2527876 ↗
50. 50) Tran, V. M., Nguyen, L. T., & Nguyen, T. H. Y. (2022). Enhancing the effectiveness of steam curing for cement paste incorporating fly ash based on long-term compressive strength and reaction degree of fly ash. Case Studies in Construction Materials, 16, e00939.10.1016/j.cscm.2022.e01146 ↗
51. 51) Tsivilis, S., Chaniotakis, E., Kakali, G., & Batis, G. (2002). An analysis of the properties of Portland limestone cements and concrete. Cement & Concrete Composites, 24(3-4), 371-378.10.1016/S0958-9465(01)00089-0 ↗
52. 52) Turner, E., Khosravi, M., Matteson, K., Plymesser, K., McKittrick, L., & Toomani, P. (2024). Feasibility of a ground-source bridge deck deicing system to mitigate concrete deterioration from temperature fluctuation. In: N. Stark, T. M. Evans, and S. Chang, (Eds.). Geo-Congress 2024: Soil Improvement, Sustainability, Geoenvironmental, and Cold Regions Engineering. Vancouver 25-28 February 2024. Reston, Virginia: American Society of Civil Engineers, 694-703.10.1061/9780784485330.070 ↗
53. 53) Wang, B., Li, Q., Liu, F., Wang, J., & Xu, S. (2018). Shear bond assessment of UHTCC repair using push-out test. Construction and Building Materials, 164, 206-216.10.1016/j.conbuildmat.2017.12.148 ↗
54. 54) Wang, B., Xu, S., & Liu, F. (2016). Evaluation of tensile bonding strength between UHTCC repair materials and concrete substrate. Construction and Building Materials, 112, 595-606.10.1016/j.conbuildmat.2016.02.149 ↗
55. 55) Wang, Y., Qiao, P., Sun, J., Chen, A., Yuan, D., & Wang, Y. (2024a). Influence of surface treatments and test methods on tensile strength of UHPC-NC interface bond. Construction and Building Materials, 456, 138538.10.1016/j.conbuildmat.2024.139051 ↗
56. 56) Wang, Y., Wu, Z., Zheng, X., Li, K., & Liu, C. (2025). A review of concrete exposed to low-temperature environments at early ages: Mechanical properties and durability. Journal of Building Engineering, 111, 113122.10.1016/j.jobe.2025.113122 ↗
57. 57) Wang, Z., Ma, H., & Niu, X. (2024b). Study of mechanics and durability of non-spontaneous combustion coal gangue coarse-aggregate high-performance concrete. Materials, 17(7), 1608.10.3390/ma17071534 ↗
58. 58) Wei, Y., Chen, X., Chai, J., & Qin, Y. (2024). Correlation between mechanical properties and pore structure deterioration of recycled concrete under sulfate freeze-thaw cycles: An experimental study. Construction and Building Materials, 412, 134799.10.1016/j.conbuildmat.2023.134794 ↗
59. 59) Wu, F., Zhang, Y., Cao, J., Li, Q., Li, Z., Chen, A., & He, L. (2025). Bonding performance between ECC repair layer and salt freeze-thaw damaged NC: Experimental study and theoretical analysis. Construction and Building Materials, 475, 141268.10.1016/j.conbuildmat.2025.141268 ↗
60. 60) Xia, J., Cheng, X., Liu, Q., Xie, H., Zhong, X., Jin, S., Mao, J., & Jin, W. (2020). Effect of the stirrup on the transport of chloride ions during electrochemical chloride removal in concrete structures. Construction and Building Materials, 250, 118845.10.1016/j.conbuildmat.2020.118898 ↗
61. 61) Xu, D., Tang, J., Hu, X., Yu, C., Han, F., Sun, S., Deng, W., & Liu, J. (2023a). The influence of curing regimes on hydration, microstructure and compressive strength of ultra-high performance concrete: A review. Journal of Building Engineering, 76, 107217.10.1016/j.jobe.2023.107401 ↗
62. 62) Xu, D., Tang, J., Hu, X., Zhou, Y., Yu, C., Han, F., & Liu, J. (2023b). Influence of silica fume and thermal curing on long-term hydration, microstructure and compressive strength of ultra-high performance concrete (UHPC). Construction and Building Materials, 395, 132287.10.1016/j.conbuildmat.2023.132370 ↗
63. 63) Xuan, D. X., Shui, Z. H., & Wu, S. P. (2009). Influence of silica fume on the interfacial bond between aggregate and matrix in near-surface layer of concrete. Construction and Building Materials, 23(7), 2631-2635.10.1016/j.conbuildmat.2009.01.006 ↗
64. 64) Yao, Y., Yang, K., Wu, H., Cheng, Z., Liu, J., Wang, J., & Zhong, R. (2024). Distributions of coarse aggregate and steel fiber in ultra-high performance concrete: Migration behavior and correlation with compressive strength. Journal of Building Engineering, 95, 110123.10.1016/j.jobe.2024.110128 ↗
65. 65) Zeng, J.-J., Hao, Z.-H., Sun, H.-Q., Zeng, W.-B., Fan, T.-H., & Zhuge, Y. (2025). Durability assessment of ultra-high-performance concrete (UHPC) and FRP grid-reinforced UHPC plates under marine environments. Engineering Structures, 323, 119303.10.1016/j.engstruct.2024.119313 ↗
66. 66) Zeng, J.-J., Pan, B.-Z., Zhuge, Y., Liu, F., Fan, T.-H., & Li, L.-J. (2023). Shear behavior of FRP-UHPC tubular beams. Composite Structures, 307, 116644.10.1016/j.compstruct.2022.116576 ↗
67. 67) Zeyad, A. M., Shah, A. M., Johari, M. A. M., & Mutnbak, M. (2024). Influence of steam curing on the performance of high-strength concrete incorporating metakaolin. Periodica Polytechnica Civil Engineering, 68(4), 1132-1148.10.3311/PPci.36571 ↗
68. 68) Zhang, H., Luo, G., Bao, J., Zhang, P., Lv, H., Li, Y., Sun, J., & Song, Q. (2024a). Improving the salt frost resistance of recycled aggregate concrete modified by air-entraining agents and nano-silica under sustained compressive loading. Case Studies in Construction Materials, 20, e02854.10.1016/j.cscm.2024.e03170 ↗
69. 69) Zhang, H., Xu, H., Bao, J., Li, R., Song, Q., Sun, J., & Qin, L. (2024b). Salt-frost damage characterization of simulant multiple ITZs in nano-silica modified recycled aggregate concrete. Materials Today Communications, 41, 110173.10.1016/j.mtcomm.2024.110296 ↗
70. 70) Zhang, K., Zhang, J., Jin, W., Mao, J., & Long, J. (2020). Stiffness degradation for fatigue of reinforced concrete beams after electrochemical rehabilitation. Construction and Building Materials, 260, 119867.10.1016/j.conbuildmat.2020.120455 ↗
71. 71) Zhang, Q., Liu, Y., & Dai, F. (2024c). A frost heave pressure model for fractured rocks subjected to repeated freeze-thaw deterioration. Engineering Geology, 337, 107587.10.1016/j.enggeo.2024.107587 ↗
72. 72) Zheng, A., Liu, Z., Li, F., & Li, S. (2021). Experimental investigation of corrosion-damaged RC beams strengthened in flexure with FRP grid-reinforced ECC matrix composites. Engineering Structures, 244, 112773.10.1016/j.engstruct.2021.112779 ↗