Physical and Thermal Properties of Concrete Subjected to High Temperature
Source abstract
Abstract
The physical and thermal properties of concrete under high temperature are obtained in order to provide reference data for material models necessary to evaluate the structural integrity of steel plate concrete containment vessels (SCCV) under accident conditions. Various parameters, such as temperature, heating duration, temperature history (heating, cooling, and the post-cooling process), water binder ratio, cement type, and aggregate type, are considered. Data on the temperature dependence of physical properties (compressive strength, elastic modulus, strain at compressive strength, splitting tensile strength) and thermal properties (thermal expansion strain, specific heat, thermal conductivity) are obtained from concrete of the same mix proportion. The effects of the variables on the properties of concrete are clarified, and the differences between test results and existing codes, such as the Eurocode, are highlighted.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kajima Corporation, Japan.
Shimizu Corporation, Japan.
Hitachi-GE Nuclear Energy, Ltd., Japan.
Toshiba Corporation, Japan.
The Chugoku Electric Power Co., Inc., Japan.
References (40)
Show source-provided references
1. 1) Architectural Institute of Japan, (2009). “Guidebook for fire-resistive performance of structural materials.” in Japanese
2. 2) Arioz, O., (2007). “Effects of elevated temperatures on properties of concrete.” Fire Safety Journal, 42, 516-522.10.1016/j.firesaf.2007.01.003 ↗
3. 3) Bazant, Z. P. and Kaplan, M. F., (1996). “Concrete at high temperature: Material properties and mathematical models.” Longman, London, UK.
4. 4) Blundell, R., Diamond, C. and Browne, R., (1976). “The properties of concretes subjected to elevated temperatures.” Report No.9, Construction Industry Research and Information Association, Under water Engineering Group, London, UK.
5. 5) Carette, G. G., Painter, K. E. and Malhora, V. M., (1982). “Sustained high temperature effects on concretes made with normal Portland cement, normal Portland cement and slag, or normal Portland cement and fly ash.” Concrete International, 4(7), 41-51.
6. 6) Carette, G. G. and Malhora, V. M., (1982). “Performance of dolostone and limestone at sustained high temperature.” Proceedings of Symposium Temperature Effects on Concrete, ASTM Special Technical Publication 858, 38-67.
7. 7) Castillo, C. and Durrani, A. J., (1990). “Effect of transient high temperature on high-strength concrete.” ACI materials Journal, 87(1), 47-53.
8. 8) DeFigh-Price. C et al., (1984). “Effects of long-term exposure to elevated temperature on mechanical properties of concrete.” ACI Symposium on Concrete and Cementitious Materials for Radioactive Waste Management, New York, USA.
9. 9) Eurocode, (2004). “Eurocode 2: Design of concrete structures – Part1-2: General rules – Structural fire design.” EN 1992-1-2.
10. 10) fib, (2007). “Fire design of concrete structures –materials, structures and modelling,” Bulletin 38.
11. 11) fib, (2008). “Fire design of concrete structures –structural behavior and assessment,” Bulletin 46.
12. 12) Harada, T., Takeda, T., Yamane, S. and Furumura, F., (1972). “Strength, elasticity and thermal properties of concrete subjected to elevated temperatures.” Paper SP-34-21 in Concrete for Nuclear Reactors, 377-406, ACI.
13. 13) Hertz, K. D., (2005). “Concrete strength for fire safety.”Magazine of Concrete Research, 57(8), 445-453.10.1680/macr.2005.57.8.445 ↗
14. 14) Hirama, T., Kumagai, H., Tanabe, M., Saigou, S., Sawada, S. and Akase, T., (2015) “Applicability evaluation of steel platereinforced concrete structure to primary containment vessel of BWRs, (2) Mechanical and thermal properties of steel under high temperature conditions.” Proceedings of 23rd International conference on Structural Mechanics in Reactor Technology (SMiRT23), Manchester, UK.
15. 15) Kakae, N., Nishimura, K., Miyamoto, K., Sawada, S. and Momma, T., (2013) “Physical properties of concrete subjected to elevated temperatures up to 700°C.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 101-102. (in Japanese)
16. 16) Kanazu, T., Matsumura, T. and Nishiuchi, T., (1996). “Changes in the mechanical properties of concrete subjected to long-term exposure to high tempera-tures.” Report No. U95037, Abiko Research Labo-ratory, Central Research Institute of Electric Power Industry.
17. 17) Kasami, H., Okuno, T. and Yamane, S., (1975). “Properties of concrete exposed to sustained elevated temperature.” Proceedings of 3rd International conference on Structural Mechanics in Reactor Technology (SMiRT3), London, UK
18. 18) Kishitani, K., Kasami, H., Oshida, F. and Okuno, T., (1982). “Property of concrete exposed to sustained elevated temperature ranging 20 to 300°C: Part 1 and 2” Summaries of technical Papers of the Annual Meeting of the Architectural Institute of Japan, 317-320. (in Japanese).
19. 19) Kitajima, Y., Miyagawa, T., Hirako, S., Kojima, I., Hirama, T. and Akase, T., (2015). “Applicability Evaluation of Steel Plate Reinforced Concrete Structure to Primary Containment Vessel of BWRs, (4) Shear loading test of steel-plate reinforced-concrete structure under high temperature conditions.” Proceedings of 23rd International conference on Structural Mechanics in Reactor Technology (SMiRT23), Manchester, UK.
20. 20) Kitano, K., Shin, K., Kinoshita, N., and Okuno, T., (1988). “Mechanical, thermal properties and Permeability of Rocks under High temperature.” Journal of the Japan Society of Engineering Georogy, 29-3, 36-47. (in Japanese)10.5110/jjseg.29.242 ↗
21. 21) Khoury, G. A., (1983). “Transient thermal creep of nuclear reactor pressure vessel type concretes.” Ph.D. Dissertation, University of London.
22. 22) Khoury, G. A., (1992). “Compressive strength of concrete at high temperature: A reassessment.” Magazine of Concrete research, 44(161), 291-309.10.1680/macr.1992.44.161.291 ↗
23. 23) Li, M., Qin, C. X. and Sun, W., (2004). “Mechanical properties of high-strength concrete after fire,” Cement and Concrete Research, 34, 1001-1005.10.1016/j.cemconres.2003.11.007 ↗
24. 24) Maruyama, I., Sasano, H., Nishioka, Y., and Igarashi, G., (2014). “Strength and Young’s modulus change in concrete due to long-term drying and heating up to 90°C.” Cement and Concrete research, 66(0), 48-63.10.1016/j.cemconres.2014.07.016 ↗
25. 25) Mendes, A., Sanjayan, J. and Collins, F., (2008). “Phase transformations and mechanical strength of OPC/Slag pastes submitted to temperature.” Materials and Structures, 41, 345-350.10.1617/s11527-007-9247-8 ↗
26. 26) Mendes, A., Sanjayan, J. and Collins, F., (2009). “Long-term progressive deterioration following fire exposure of OPC versus Slag blended pastes.” Materials and Structures, 42, 95-101.10.1617/s11527-008-9369-7 ↗
27. 27) Nagao, K. and Nakane, S., (1991). “Influences of various factors on physical properties of concretes heated to high temperatures.” Proceedings of 11th International conference on Structural Mechanics in Reactor Technology (SMiRT11), Tokyo, japan.
28. 28) Narita, S., Osaka, M., Kurita, T., Kobayashi, T., Kakae, N. and Kobayashi, Y., (2015). “Applicability evaluation of steel plate reinforced concrete structure to primary containment vessel of BWRs, (3) Compressive loading test of steel-plate reinforced-concrete structure under high temperature conditions.” Proceedings of 23rd International conference on Structural Mechanics in Reactor Technology (SMiRT23), Manchester, UK.
29. 29) Nasser, K. W. and Chakaborty, H., (1985). “Temperature effects on strength and elasticity of concrete containing admixtures.” Proceedings of Symposium Temperature Effects on Concrete, ASTM Special Technical Publication 858, 118-133.10.1520/STP34211S ↗
30. 30) Naus, D. J., (2006). “The effect of elevated temperature on concrete materials and structures - A literature review.” NUREG/CR-6900 ORNL/TM-2005/553.10.2172/974590 ↗
31. 31) Naus, D. J., (2010). “A compilation of elevated temperature concrete material property data and information for use in assessments of nuclear power plant reinforced concrete structures.” NUREG/CR-7031 ORNL/TM-2009/175.
32. 32) Ohga, Y., Saigo, S., Hirai, H., Kakae, N., Miyamoto, K., Kumagai, H. and Kobayashi, Y., (2015). “Applicability evaluation of steel plate reinforced concrete structure to primary containment vessel of BWRs, (1) Mechanical and thermal properties of concrete under high temperature conditions.” Proceedings of 23rd International conference on Structural Mechanics in Reactor Technology (SMiRT23), Manchester, UK.
33. 33) Okayasu, T., Momma, T., Imamura, Y., Mimori, S. and Kobayashi, Y., (2015). “Applicability evaluation of steel plate reinforced concrete structure to primary containment vessel of BWRs, (5) Horizontal loading test of cylindrically-shaped steel-plate reinforced-concrete structure under high temperature conditions.” Proceedings of 23rd International conference on Structural Mechanics in Reactor Technology (SMiRT23), Manchester, UK.
34. 34) Poon, C. S., Azhar, S., Anson, M., and Wong, Y. L., (2001). “Comparison of the strength of ordinary and high performance concrete.” Cement and Concrete Research, 31, 1291-1300.10.1016/S0008-8846(01)00580-4 ↗
35. 35) Poon, C. S., Azhar, S., Anson, M., and Wong, Y. L., (2003). “Performance of metakaolin concrete at elevated temperature.” Cement and Concrete Composites, 25, 83-89.10.1016/S0958-9465(01)00061-0 ↗
36. 36) Raju, M. P., Shobha, M. and Rambabu, K., (2004). “Flexural strength of fly ash concrete under elevated temperatures.” Magazine of Concrete Research, 56(2), 83-88.10.1680/macr.2004.56.2.83 ↗
37. 37) Sarshar, R. and Khoury, A., (1993). “Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperature.” Magazine of Concrete Research, 45(162), 51-61.10.1680/macr.1993.45.162.51 ↗
38. 38) Schneider, U., Diererichs, C. and Ehm, C., (1981). “Effect of temperature on steel and concrete for PCRV’s.” Nuclear Engineering and Design, 67, 245-258.
39. 39) Suzuki, T., Tabuchi, M. and Nagao, K., (1995). “Study on the degradation of concrete characteristics in the high temperature environment.” In: Concrete under Severe Conditions: Environment and Loading, 2, 1119-1128.
40. 40) Xu, Y., Wong, Y. L., Poon, C. S. and Anson, M., (2001). “Impact of high temperature on PFA concrete.” Cement and Concrete Research, 31, 1065-1073.10.1016/S0008-8846(01)00513-0 ↗