Basic Bond Characteristics of FRP Strand Sheet-Concrete Interface with Polyurea Resin
Source abstract
Abstract
Aiming at improving bond strengths between FRP sheet and concrete, the FRP sheet bonding method using high elongation elastic resin as a buffer layer was developed. In this study, bonding tests was conducted to clarify the basic bond characteristics of FRP strand sheet-concrete interface with a polyurea resin. As a result of the bonding tests, it was found that the use of the polyurea resin as a buffer layer significantly improved the bond strength and the interfacial fracture energy between FRP sheets and concrete. In addition, bond stress-slip relationships with a polyurea resin were proposed. Finally, numerical analyses of bonding CFRP strand sheets and concrete were conducted so as to verify va-lidity of the proposed bond stress-slip relationships. This paper is an extended version in English from the authors’ previous work [Kobayashi, A., Ozaki, M., Sato, Y., Arazoe, M., Tateishi, A. and Komori, A., (2020). “Study on bonding behavior of FRP sheets and concrete bonded with high elongation elastic resin.” Journal of Structural Engineering, JSCE, 66A, 855-867. (in Japanese)].
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Environmental Engineering, Waseda University, 3-4-1, Okubo, Shinjuku-ku, Tokyo 169-0072, Japan.
Nippon Steel Chemical & Material Co., Ltd., 13-1, Nihonbashi 1-chome, Chuo-ku, Tokyo 103-0027, Japan.
Civil Engineering Group, Infrastructural Use Department, Composite Division, Nippon Steel Chemical & Material Co., Ltd., Tokyo 103-0027, Japan.
Administration & Planning Group, Composite Development Department, Composite Division, Nippon Steel Chemical & Material Co., Ltd., Tokyo 103-0027, Japan.
Reinforcing Materials Sales Group, Infrastructural Use Department, Composite Division, Nippon Steel Chemical & Material Co., Ltd., Tokyo 103-0027, Japan.
References (36)
Show source-provided references
1. 1) Bilotta, A., Ceroni, F., Ludovico, M. D., Nigro, E., Pecce, M. and Manfredi, G., (2011). “Bond efficiency of EBR and NSM FRP systems for strengthening concrete members.” Journal of Composites for Construction, 15(5), 757-772.10.1061/(ASCE)CC.1943-5614.0000204 ↗
2. 2) Ceroni, F. and Pecce, M., (2010). “Evaluation of bond strength in concrete elements externally reinforced with CFRP sheets and anchoring devices.” ASCE Journal of Composites for Construction, 14(5), 521-530.10.1061/(ASCE)CC.1943-5614.0000118 ↗
3. 3) Chen, C., Cheng, L., Sui, L., Xing, F., Li, D. and Zhou, Y., (2018). “Design method of end anchored FRP strengthened concrete structures.” Engineering Structures, 176, 143-158.10.1016/j.engstruct.2018.08.081 ↗
4. 4) Chen, F. J. and Teng, G. J., (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” Journal of Structural Engineering, ASCE, 127(7), 784-791.10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
5. 5) Dai, J., Ueda, T. and Sato, Y., (2005). “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method.” Journal of Composites for Construction, ASCE.” 9(1), 52-62.10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
6. 6) Dai, J., Ueda, T. and Sato, Y., (2006). “Unified analytical approaches for determining shear bond characteristics of frp-concrete interfaces through pullout tests.” Journal of Advanced Concrete Technology, 4(1), 133-145.10.3151/jact.4.133 ↗
7. 7) fib, (2019). “Externally applied FRP reinforcement for concrete structures (fib bulletin 90).” Lausanne, Switzerland: Fédération Internationale du Béton.
8. 8) Godat, A., Ceroni, F., Chaallal, O. and Pecce, M., (2017). “Evaluation of FRP-to-concrete anchored joints designed for FRP shear-strengthened RC T-beams.” Composite Structures, 176, 481-495.10.1016/j.compstruct.2017.04.035 ↗
9. 9) Gravina, J. R., Aydin, H. and Visintin, P., (2017). “Extraction and analysis of bond-slip chracteristics in deteriorated FRP-to-concrete joints using a mechanics-based approach.” Journal of Materials in Civil Engineering, 29(6), Article ID 04017013.10.1061/(ASCE)MT.1943-5533.0001881 ↗
10. 10) Izumo, K., Saeki, N. and Ohnuma, H., (2000). “Estimating bond strength between fiber sheets and concrete.” Concrete Library International, JSCE, 37, 167-174.10.2208/jscej.2000.641_167 ↗
11. 11) JSA, (2014). “JIS K 7161: Plastics - Determination of tensile properties.” Tokyo: Japan Standards Association.
12. 12) JSA, (2011). “JIS K 7181: Plastics - Determination of compressive properties.” Tokyo: Japan Standards Association.
13. 13) JSCE, (2007). “Standard specifications for concrete structures - 2007: Design.” Tokyo; Japan Society of Civil Engineers.
14. 14) JSCE, (2013). “JSCE-E 543-2013: Bond test method between continuous fiber sheet and concrete (draft).” Tokyo; Japan Society of Civil Engineers. (in Japanese)
15. 15) Kanakubo, T., Furuta, T. and Fukayama, H., (2003). “Bond strength between fiber-reinforced polymer laminates and concrete.” In: K. H. Tan, Ed. Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures, Singapore 8-10 July 2003. Singapore: World Scientific Publishing, 1, 133-142.10.1142/9789812704863_0010 ↗
16. 16) Khalifa, A., Alkhrdaji, A., Nanni, A. and Lansburg, S., (1999). “Anchorage of surface mounted FRP reinforcement.” Concrete International: Design and Construction, 21(10), 49-54.
17. 17) Kobayashi, A., Tateishi, A., Sato, Y. and Takahashi, Y., (2009). “Study on basic characteristics of FRP strand sheets and its flexural strengthening effect for RC beams.” In: D. J. Oehlers, M. C. Griffith and R. Seracino Eds. Proceedings of the 9th International Symposium on on FRP Reinforcement for Concrete Structures (FRPRC-9), Sydney, Australia 13-15 July 2009. Adelaide: University of Adelaide.
18. 18) Kobayashi, A., Ozaki, M., Sato, Y., Arazoe, M., Tateishi, A. and Komori, A., (2020). “Study on bonding behavior of FRP sheets and concrete bonded with high elongation elastic resin.” Journal of Structural Engineering, JSCE, 66A, 855-867. (in Japanese)
19. 19) Lee, D., Cheng, L. and Hui, Y. G., (2013). “Bond characteristics of various NSM FRP reinforcements in concrete.” Journal of Composites for Construction, 17(1), 117-129.10.1061/(ASCE)CC.1943-5614.0000318 ↗
20. 20) Lu, X. Z., Teng, J. G., Ye, L. P. and Jiang, J. J., (2005). “Bond-slip models for FRP sheets/plates bonded to concrete.” Engineering Structures, 27, 920-937.10.1016/j.engstruct.2005.01.014 ↗
21. 21) Maeda, T., Komaki, H., Tsubouchi, K. and Murakami, K., (2001). “Strengthening behavior of carbon fiber sheet using flexible layer.” Proceedings of the Japan Concrete Institute, 23(1), 817-822. (in Japanese)
22. 22) Mitsui, M., Fukazawa, K., Saito, M. and Funakawa, I., (2004). “Temperature dependency on shear bonding characteristics of FRP sheet-concrete interface using soft resin.” In: Proceedings of the Japan Concrete Institute, 26(1), 351-356. (in Japanese)
23. 23) Moghaddas, A. and Mostofinejad, D., (2019). “Empirical FRP-concrete bond strength model for externally bonded reinforcement on grooves.” ASCE Journal of Composites for Construction, 23(2), Article ID 04018080.10.1061/(ASCE)CC.1943-5614.0000924 ↗
24. 24) Mukhopadhyaya, P., Swamy, N. and Lynsdale, C., (1998). “Optimizing structual response of beams strengthened with GFRP plates.” ASCE Journal of Composites for Construction, 2(2), 87-95.10.1061/(ASCE)1090-0268(1998)2:2(87) ↗
25. 25) Neubauer, U. and Rostásy, F. S., (1997). “Design aspects of concrete structures strengthened with externally bonded CFRP plates.” In: M. C. Forde, Ed. Proceedings of 7th International Conference on Structural Faults and Repairs, Edinburgh, Scotland 8 July 1997. Edinburgh: ESC Publications, 2, 109-118.
26. 26) Sato, Y., Ito, T., Komaki, H. and Maeda, T., (2002). “Flexural behavior of FRP sheet strengthening EC beams with soft adhesive layer.” Proceedings of the Japan Concrete Institute, (24)2, 1375-1380. (in Japanese)
27. 27) Sato, Y., Asano, Y. and Ueda, T., (2001). “Fundamental study on bond mechanism of carbon fiber sheet.” Concrete Library International, JSCE, 37, 97-115.
28. 28) Savoia, M., Ferracti, B. and Mazzotti, C., (2005). “Creep deformation of fiber reinforced plastics-plated reinforced concrete tensile members.” ASCE Jounal of Composites for Construction, 9(1), 63-72.10.1061/(ASCE)1090-0268(2005)9:1(63) ↗
29. 29) Takahashi, Y. and Sato, Y., (2003). “Flexural behavior of RC beams externally reinforced with carbon fiber sheets.” In: K. H. Tan, Ed. Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures, Singapore 8-10 July 2003. Singapore: World Scientific Publishing, 1, 237-246.10.1142/9789812704863_0020 ↗
30. 30) Taljsten, B., (1996). “Strengthening of concrete prisms using the plate-debonding technique.” International Journal of Fracture, 82, 253-266.10.1007/BF00013161 ↗
31. 31) Toutanji, H., Saxena, P., Zhao, L. and Ooi. T., (2007). “Prediction of interfacial bond failure of FRP-concrete surface.” ASCE Journal of Composites for Construction, 11(4), 427-436.10.1061/(ASCE)1090-0268(2007)11:4(427) ↗
32. 32) Yuan, H., Lu, X., Hui, D. and Feo, L., (2012). “Studies on FRP-concrete interface with hardening and softning bond-slip law.” Composite Structures, 94, 3781-3792.10.1016/j.compstruct.2012.06.009 ↗
33. 33) Yuan, H., Teng, J. G., Seracino, R., Wu, Z. S. and Yao, J., (2004). “Full-range behavior of FRP-to-concrete bonded joints.” Engineering Structures, 26, 553-565.10.1016/j.engstruct.2003.11.006 ↗
34. 34) Yu, J., Shang, X. and Lu, Z., (2016). “Efficiency of externally bonded L-shaped FRP laminates in strengthening reinforced-concrete interior beam-column joints.” Journal of Composites for Construction, 20(3), Article ID 04015064.10.1061/(ASCE)CC.1943-5614.0000622 ↗
35. 35) Wu, Z. S., Yuan, H., Yoshizawa, H. and Kanakubo, T., (2001). “Experimental/analytical study on interface fracture energy and fracture propagation along FRP-concrete interface.” In: ACI SP-201: Fracture Mechanics for Concrete Materials - Testing and Applications. Farmington Hills, MI, USA: American Concrete Institute, 133-152.
36. 36) Zhang, S. S., Teng, J. G. and Yu, T., (2014). “Bond strength model for CFRP strips near-surface mounted to concrete.” ASCE Journal of Composites for Construction, 18(3), Article ID A4014003.10.1061/(ASCE)CC.1943-5614.0000402 ↗