New Trends in the Development of Chemical Admixtures in Japan
Source abstract
Abstract
This paper describes the history and new trends in the development of chemical admixtures in Japan. PC (polycarboxylic acid)-based agents are the main products in the superplasticizer market. A low-stickiness type PC-based superplasticizer has been developed based on the conventional PC-based superplasticizer. The flowing speed of concrete with low stickiness type PC-based superplasticizer is faster than that with the conventional PC-based superplasticizer. By addition of a new viscosity agent consisting of a mix of anionic and cationic surface active agents, the three dimensional reticulation structures is formed in fresh cement paste and the viscosity of the cement paste can be increased and segregation can be prevented. The hydration of cement in sludge water is controlled by addition of a set-retarder, and the specific surface area of cement does not increase while a large amount of unreacted alite remains in the sludge water. Recycling of concrete at ready mixed concrete plants is possible without adversely influencing the properties of concrete when sludge water with the set-retarder containing gluconate salt is used. The slurry type and powder type calcium aluminate based accelerator (CA) and calciumsulfoaluminate based accelerator (CSA) for shotcrete have been developed. In the case of CA, the final setting time of the mortar is accelerated by increasing the dosage. By adding of CSA, both the initial and final setting times of mortar are shortened with increased dosages.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Aizawa, K., Nishimura, T. and Watanabe, K. (1996). “An experimental study on use of concrete sludge by adding ultra-retarder at ready mixed concrete plant.” Proc. Japan Concrete Institute, 18(1), 387-392. (in Japanese)
2. Degussa AG. (1996). “Co-polymer based on oxyalkylen glycol alkenyl ethers and unsaturated di-carboxyliacid dereivatves.” JP 3429410.
3. Degussa AG. (1999). “Co-polymer based on oxyalkylen glycol alkenyl ethers and unsaturated di-carboxyliacid dereivatves.” JP 3411538.
4. Denki Kagaku Kogyo Co., Ltd. (1981). “Spray method for quick setting materials.” JP 1743987.
5. Denki Kagaku Kogyo Co., Ltd. (1987). “Accelerator for shotcrete.” JP 2060759.
6. Denki Kagaku Kogyo Co., Ltd. (1990). “Spray method for quick setting materials.” JP 2118718.
7. Denki Kagaku Kogyo Co., Ltd. (1995). “Spray method and shotcreting materials.” JP 3412794.
8. Denki Kagaku Kogyo Co., Ltd. (1996). “Spray method and shotcreting materials.” JP 3532068.
9. FUJIMOTO HIROYUKI · 1999 · 37 · 1010.3151/coj1975.37.7_10 ↗
10. Hattori, K. (2002). “Development of superplasticizers.” Concrete J., 40(1), 27-35. (in Japanese)10.3151/coj1975.40.1_27 ↗
11. Hattori, K., Yamakawa, K., Tuji, A. and Akashi, T. (1964). “On the dispersing properties of β -naphthalene sulfonate formaldehyde condensate.” Review of the 18th General Meeting, The Cement Association of Japan, 105-106.
12. Ishida, A., Teramura, S., Hirano, K. and Nakagawa, K. (1999). “Calcium sulfoaluminate based accelerator for high-strength shotcrete in Japan.” Proc. 8th Int'l Conf. Shotcrete for underground support VIII, 202-215.
13. Ishida, A., Takahashi, M. and Hirano, K. (2002). “New accelerator for shotcrete development of slurry type accelerator.” Proc.9th Int'l Conf. Shotcrete for underground support IX, 79-88.
14. Japan Cement Association (2003). “Dispersing mechanism of dispersant and flowability of cement and concrete.” Committee report on fluidity of cement concrete, 111-133. (in Japanese)
15. JIS A 6204 “Chemical admixtures for concrete.” (2005).
16. Kao Soap Co., Ltd. (1964). “Dispersing method of cement.” JP Sho 41-11737.
17. Koyanagi, K., Miyamoto, S., Yamamuro, H. and Mizunuma, T. (2003). “Basic study for slurry with special type viscosity agent.” Proc. 57th Cement Gijutsu Taikai, 42-43. (in Japanese)
18. Koyanagi, K., Yamamuro, H. and Mineshita, S. (2005). “Development of fixed solution for construction of manufactured pile by using new viscosity agent.” Proc. 60th Annual Meeting of Japan. Soc. Civil. Eng., V, 515-516. (in Japanese)
19. Matsuo, S., Sugamata, T., Satou, K., Goto, T., Harada, K. and Yamamiya, H. (2002). “Workability improving superplasticizers.” NMB Transactions, (14), 28-36. (in Japanese)
20. Nakanishi, H., Tamaki, S., Yaguchi, M., Yamada, K., Kinoshita, M., Ishimori, M. and Okazawa, S. (2003). “Performance of a multifunctional and multipurpose superplasticizer for concrete.” Proc. 7th CANMET/ACI Int'l Conf. Superplasticizers and other chemical admixture in concrete, ACI-SP 217, 327-341.
21. Nagataki, S. and Sakai, E. (1994). “Applications in Japan and South East Asia.” “High Performance Concretes and Applications” (edited by Shah, S.P. and Ahmad, S.,H.) Edward Arnold. 373-397.10.1201/9781482267426-11 ↗
22. NMB Co., Ltd. (2002). “Cement additives for workability improvement of the cement materials.” JP Open 2003-165755.
23. NMB Co., Ltd. (2002). “Cement additives for good slump retention.” JP Open 2003-335562.
24. NMB Co., Ltd. (2003). “Cement additives.” JP Open 2004-307590.
25. Nippon Shokubai Co., Ltd. (1981). “Cement dispersant.” JP Sho 59-18338.
26. Nippon Shokubai Co., Ltd. and NMB Co., Ltd. (1993). “Cement dispersant and process methods.” JP 3180864.
27. Nippon Shokubai Co., Ltd. and NMB Co., Ltd. (1995). “Process methods and used cement materials.” JP 3179022.
28. Nippon Shokubai Co., Ltd. (2002). “Cement dispersant.” JP Open 2003-342050
29. Nippon Shokubai Co., Ltd. (2002). “Cement dispersant.” JP Open 2003-335563
30. Nippon Sika Co., Ltd. (1998). “Cement dispersant and concrete materials with this dispersant.” JP Open 2000-191356
31. Nishi, S., Oshio, A. and Fukuzawa, K. (1971). “Some experimental studies on fundamental properties of autoclaved concrete.” Review 25th General Meeting of The Cement Association of Japan. 138-140.
32. Okamura, H. and Ouchi, M. (2003). “Self-compacting concrete.” J. Advanced Concrete Tech., 1, 5-15.10.3151/jact.1.5 ↗
33. Sanyo Chemical Industry, Ltd. and Nippon Cement Co., Ltd. (1979). “Shrinkage reducing agent for cement.” JP 1194725.
34. Sakai, E. and Daimon, M. (1995). “Mechanisms of superplastification.” Materials Science of Concrete IV, American Cerm. Soc., 91-111.
35. Sakai, E., Yamada, K. and Ohta, A. (2003). “Molecular structure and dispersion-adsorption mechanisms of comb-type superplasticizers used in Japan.” J. Advanced Concrete Tech., 1, 16-25.10.3151/jact.1.16 ↗
36. Sakata, N., Yanai, S., Yokozeki, K. and Maruyama, K. (2003). “Study on new viscosity agent for combination use type of self-compacting concrete.” J. Advanced Concrete Tech., 26-36.
37. Sato, T., Goto, K. and Sakai, K. (1983). “Mechanisms for reducing drying shrinkage of hardened cement by organic additives.” CAJ Review of the 37th general meeting, 52-55.
38. 10.3151/jact.1.2610.3151/jact.1.26 ↗
39. Song, Y., Sakai, E., Takeuchi, T. and Daimon, M. (2004). “Effect of set retarder on hydration and available time of sludge.” Cement Sci. and Concrete Tech., (58), 601-606. (in Japanese)
40. Sugamata, T., Sugiyama, T. and Ohta., A. (2003). “The effect of a new high-range water reducing agent on the improvement of rheological properties.” Proc. 7th CANMET/ACI Int'l Conf. Superplasticizers and other chemical admixture in Concrete, ACI-SP 217, 343-359.
41. Yamamuro, H., Koyanagi, K., Yokozeki, K. and Matsubara, N. (2003). “Fundamental properties of paste and mortar of lightweight self-compacting concrete with thickener.” Proc. Japan Concrete Institute, 25(1), 1307-1312. (in Japanese)