Strong Coupling of Freeze-Thaw Cycles and Alkali Silica Reaction - Multi-scale Poro-mechanical Approach to Concrete Damages -
Source abstract
Abstract
This paper aims to upgrade the poro-mechanical scheme to simulate concrete volume change and damages which are strongly coupled with both alkali silica reaction (ASR) and freeze-thaw cycles (FTC). The interaction of two impacts are modeled by considering ASR gel intrusion and ice formation in micro pores and crack gaps, gel movement and un-frozen water suction into entrained air, gel and water migration through cracks as well as equilibrium and mass conservation of both concrete skeleton and mixed pore substances. For the assessment how the proposed numerical scheme works, sequence of events on ASR and FTC is focused on. It shows that ASR can reduce the FTC expansion for non-air-entrained (non-AE) case, but increase the frost damage for air-entrained (AE) concrete. Similarly, the FTC damaged concrete will have a smaller ASR expansion for non-AE case, but a greater expansion when AE admixture agent is dosed. The simulated behaviors also agree well with past experiments of combined ASR and FTC. Finally, the analysis on short-term strength shows that the ASR damaged concrete has a higher residual compressive strength and ductility rather than FTC damaged one due to viscous ASR gel which stand for broken symmetry of damage fields.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Rock Mechanics and Modeling · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, The University of Tokyo, Japan.
References (46)
Show source-provided references
1. 1) ACI Committee, (2008). “Building code requirements for structural concrete (ACI 318-08) and commentary.” American Concrete Institute, and International Organization for Standardization.
2. 2) Bangert, F., Kuhl, D. and Meschke, G., (2004). “Chemo-hygro-mechanical modeling and numerical simulation of concrete deterioration caused by alkali-silica reaction.” International Journal for Numerical and Analytical Methods in Geomechanics, 28(7-8), 689-714.10.1002/nag.375 ↗
3. 3) Bažant, Z. P. and Steffens, A., (2000). “Mathematical model for kinetics of alkali-silica reaction in concrete.” Cement and Concrete Research, 30(3), 419-428.10.1016/S0008-8846(99)00270-7 ↗
4. 4) Biot, M. A., (1941). “General theory of three-dimensional consolidation.” Journal of Applied Physics, 12, 155-164.10.1063/1.1712886 ↗
5. 5) Biot, M. A., (1963). “Theory of stability and consolidation of a porous media under initial stress.” Journal of Mathematics and Mechanics, 12(2), 521-541.
6. 6) Charpin, L. and Ehrlacher, A., (2014). “Simplified model for the transport of alkali-silica reaction gel in concrete porosity.” Journal of Advanced Concrete Technology, 12(1), 1-6.10.3151/jact.12.1 ↗
7. 7) Costa, U., Mangialar, T. and Paolini, A., (2014). “Assessment of blended cements effectiveness against ASR by mortar and concrete expansion tests.” Journal of Advanced Concrete Technology, 12(8), 266-278.10.3151/jact.12.266 ↗
8. 8) Coussy, O. and Monteiro, P. J. M., (2008). “Poroelastic model for concrete exposed to freezing temperatures.” Cement and Concrete Research, 38(1), 40-48.10.1016/j.cemconres.2007.06.006 ↗
9. 9) Elakneswaran, Y. and Ishida, T., (2014). “Development and verification of an integrated physicochemical and geochemical modelling framework for performance assessment of cement-based materials.” Journal of Advanced Concrete Technology, 12(4), 111-126.10.3151/jact.12.91 ↗
10. 10) Fagerlund, G., (2002). “Mechanical damage and fatigue effects associated with freeze-thaw of materials.” In: M. J. Setzer, R. Auberg and H. J. Keck. Eds. Proc. 2nd International RILSM Workshop on Frost Resistant of Concrete, Essen 18-19, Cachan Cedex: RILEM Publications S.A.R.L., 117-132.
11. 11) Fournier, B., Ideker, J. H., Folliard, K. J., Thomas, M. D., Nkinamubanzi, P. C. and Chevrier, R., (2009). “Effect of environmental conditions on expansion in concrete due to alkali–silica reaction (ASR).” Materials Characterization, 60(7), 669-679.10.1016/j.matchar.2008.12.018 ↗
12. 12) Gebreyouhannes, E. and Maekawa, K., (2016). “Nonlinear gel migration in cracked concrete and broken symmetry of corrosion profiles.” Journal of Advanced Concrete Technology, 14(6), 271-286.10.3151/jact.14.271 ↗
13. 13) Gong, F., Sicat, E., Ueda, T. and Zhang, D., (2013). “Meso-scale mechanical model for mortar deformation under freeze thaw cycles.” Journal of Advanced Concrete Technology, 11(2), 49-60.10.3151/jact.11.49 ↗
14. 14) Gong, F., Sicat, E., Zhang, D. and Ueda, T., (2015a). “Stress analysis for concrete materials under multiple freeze-thaw cycles.” Journal of Advanced Concrete Technology, 13(3), 124-134.10.3151/jact.13.124 ↗
15. 15) Gong, F., Wang, Y., Zhang, D. and Ueda, T., (2015b). “Mesoscale simulation of deformation for mortar and concrete under cyclic freezing and thawing stress.” Journal of Advanced Concrete Technology, 13(6), 291-304.10.3151/jact.13.291 ↗
16. 16) Hasan, M., Okuyama, H., Sato, Y. and Ueda, T., (2004). “Stress-strain model of concrete damaged by freezing and thawing cycles.” Journal of Advanced Concrete Technology, 2(1), 89-99.10.3151/jact.2.89 ↗
17. 17) Hasan, M., Ueda, T. and Sato, Y., (2008). “Stress-strain relationship of frost-damaged concrete subjected to fatigue loading.” Journal of Materials in Civil Engineering, 20(1), 37-45.10.1061/(ASCE)0899-1561(2008)20:1(37) ↗
18. 18) Jensen, A. D., Chatterji, S., Christensen, P. and Thaulow, N., (1984). “Studies of alkali-silica reaction—part II effect of air-entrainment on expansion.” Cement and Concrete Research, 14(3), 311-314.10.1016/0008-8846(84)90046-2 ↗
19. 19) Kawabata, Y. and Yamada, K., (2015). “Evaluation of alkalinity of pore solution based on the phase composition of cement hydrates with supplementary cementitious materials and its relation to suppressing ASR expansion.” Journal of Advanced Concrete Technology, 13(11), 538-553.10.3151/jact.13.538 ↗
20. 20) Kawamura, M., Takeuchi, K. and Sugiyama, A., (1994). “Mechanisms of expansion of mortars containing reactive aggregate in NaCl solution.” Cement and Concrete Research, 24(4), 621-632.10.1016/0008-8846(94)90186-4 ↗
21. 21) Lepech, M. and Li, V. C., (2005). “Water permeability of cracked cementitious composites.” In: Proceedings of International Conference of Fracture, Turin.
22. 22) Liaudat, J., Martínez, A., López, C. and Carol, I., (2015). “Numerical modelling of ASR expansion in concrete.” In: C. Hellmich, J. Kollegger, B. Pichler (Eds). Proceedings of CONCREEP10, 445-454.10.1061/9780784479346.054 ↗
23. 23) Maekawa, K. and Ishida, T., (2002). “Modeling of structural performances under coupled environmental and weather actions.” Materials and Structures, 35(10), 591-602.10.1007/BF02480352 ↗
24. 24) Maekawa, K., Ishida, T. and Kishi, T., (2003). “Multi-scale modeling of concrete performance.” Journal of Advanced Concrete Technology, 1(2), 91-126.10.3151/jact.1.91 ↗
25. 25) Maekawa, K., Soltani, M., Ishida, T. and Itoyama, Y., (2006). “Time-dependent space-averaged constitutive modeling of cracked reinforced concrete subjected to shrinkage and sustained loads.” Journal of Advanced Concrete Technology, 4(1), 193-207.10.3151/jact.4.193 ↗
26. 26) Maekawa, K., Ishida, T. and Kishi, T., (2008). “Multi-scale modeling of structural concrete.” Oxon, UK, Taylor & Francis.10.1201/9781482288599 ↗
27. 27) Maekawa, K., Ishida, T., Chijiwa, N. and Fujiyama, C., (2013). “Multiscale coupled-hygromechanistic approach to the life-cycle performance assessment of structural concrete.” Journal of Materials in Civil Engineering, 27(2), A4014003.10.1061/(ASCE)MT.1943-5533.0000984 ↗
28. 28) Maekawa, K. and Fujiyama, C., (2013). “Rate-dependent model of structural concrete incorporating kinematics of ambient water subjected to high-cycle loads.” Engineering Computations, 30(6), 825-841.10.1108/EC-06-2012-0125 ↗
29. 29) Maraghechi, H., Fischer, G. and Rajabipour, F., (2012). “The role of residual cracks on alkali silica reactivity of recycled glass aggregates.” Cement and Concrete Composites, 34(1), 41-47.10.1016/j.cemconcomp.2011.07.004 ↗
30. 30) Multon, S., Sellier, A. and Cyr, M., (2009). “Chemo-mechanical modeling for prediction of alkali silica reaction (ASR) expansion.” Cement and Concrete Research, 39(6), 490-500.10.1016/j.cemconres.2009.03.007 ↗
31. 31) Muranaka, M. and Tanaka, Y., (2013). “Development of physical and chemical model for concrete expansion due to ASR based on reaction mechanism.” Journal of Japan Society of Civil Engineers, E2/V-69(1), 1-15. (in Japanese)
32. 32) Powers, T. C., (1945). “A working hypothesis for further studies of frost resistance of concrete.” Journal Proceedings, ACI, 41(1), 245-272.
33. 33) Power, T. C., (1949), “The air requirement of frost-resistant concrete”, Proc. Highway Res. Board, 29, 184-211.
34. 34) Sannoh, C. and Torii, K., (2014). “The suppressing effect of fly ashes on alkali-silica reaction of RC specimens exposed on seashore.” In: Proceedings of Asian Concrete Federation-2014, 1093-1096.
35. 35) Saouma, V. E., (2014). “Numerical modeling of AAR.” Taylor & Francis.
36. 36) Saouma, V. E., Martin, R. A., Hariri-Aredebili, M. A. and Katayama, T., (2015). “A mathematical model for the kinetics of the alkali-silica chemical reaction.” Cement and Concrete Research, 68, 184-195.10.1016/j.cemconres.2014.10.021 ↗
37. 37) Scherer, G. W. and Valenza II, J. J., (2005). “Mechanisms of frost damage.” Materials Science of Concrete, 7, 209-246.
38. 38) Sicat, E., Gong, F., Zhang, D. and Ueda, T., (2013). “Change of the coefficient of thermal expansion of mortar due to damage by freeze thaw cycles.” Journal of Advanced Concrete Technology, 11(12), 333-346.10.3151/jact.11.333 ↗
39. 39) Starks, D., (1995). “Effects of water-cement ratio on expansion due to ASR.” Concrete Technology Today, 3-5.
40. 40) Sun, Z. and Scherer, G. W., (2010). “Effect of air voids on salt scaling and internal freezing.” Cement and Concrete Research, 40(2), 260-270.10.1016/j.cemconres.2009.09.027 ↗
41. 41) Takahashi, Y., Shibata, K. and Maekawa, K., (2014). “Chemo-hygral modeling and structural behaviors of reinforced concrete damaged by alkali silica reaction.” In: Proceedings of Asian Concrete Federation-2014, 1274-1281.
42. 42) Takahashi, Y., Tanaka, Y. and Maekawa, K., (2015). “Chemo-hygral model for ASR expansion and its effects on fatigue lives of bridge slabs.” In: E. Onate, D. R. J. Owen, D. Peric and M. Chiumenti (Eds). XIII International Conference on Computational Plasticity. Fundamentals and Applications, 944-955.
43. 43) Takahashi, Y., Ogawa, S., Tanaka, Y. and Maekawa, K., (2016). “Scale-dependent ASR expansion of concrete and its prediction coupled with silica gel generation and migration.” Journal of Advanced Concrete Technology, 14(8), 444-463.10.3151/jact.14.444 ↗
44. 44) Ueda, T., Hasan, M., Nagai, K., Sato, Y. and Wang, L., (2009). “Mesoscale simulation of influence of frost damage on mechanical properties of concrete.” Journal of Materials in Civil Engineering, 21(6), 244-252.10.1061/(ASCE)0899-1561(2009)21:6(244) ↗
45. 45) Wang, K., Nelsen, D. E. and Nixon, W. A., (2006). “Damaging effects of deicing chemicals on concrete materials.” Cement and Concrete Composites, 28(2), 173-188.10.1016/j.cemconcomp.2005.07.006 ↗
46. 46) Wang, Y., Gong, F., Zhang, D. and Ueda, T., (2016). “Estimation of ice content in mortar based on electrical measurements under freeze-thaw cycle.” Journal of Advanced Concrete Technology, 14(2), 35-46.10.3151/jact.14.35 ↗