Strength Targeted PBMD of HSC based on One-parameter Bayesian Probabilistic Method
Source abstract
Abstract
This paper is about application of recently proposed Performance Based Mixture Design (PBMD) for mix proportion design of high strength concrete (HSC) that can satisfy required performances. The PBMD method is a performance oriented concrete mix proportion design procedure easily applicable to any conditions and environments for a possible replacement to the current prescriptive design standards. Based on extensive experimental results obtained for various material and performance parameters of HSC, the application feasibility of the developed PBMD procedure for HSC has been verified. Also, the proposed PBMD procedure has been used to perform application examples to obtain desired target performances of HSC with optimum concrete mixture proportions using locally available materials, local environmental conditions, and available concrete production technologies. The validity and precision of HSC mix proportion design obtained using the PBMD method is verified with the experimental and ACI presented results to check the feasibility for actual design usage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Properties and Behavior · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil and Environmental Engineering, Yonsei University, Seoul, South Korea.
Faculty of Civil Engineering and Applied Mechanics, University of Technical Education of Ho Chi Minh City, Vietnam.
Structure Research Department, Korea Institute of Construction Technology (KICT), Goyang-si, South Korea.
Industry Promotion Department, Technology Implementation Division, Korea Institute of Construction & Transportation Technology Evaluation and Planning (KICTEP), Anyang-si, South Korea.
References (35)
Show source-provided references
1. ACI, (1992). “Report on high-strength concrete.” Michigan: American Concrete Institute, ACI 363R-92.
2. ACI, (2002). “Evaluation of strength test results of concrete.” Michigan: American Concrete Institute, ACI 214-02.
3. ACI, (2008). “Guide for selecting proportions for high-strength concrete using portland cement and other cementitious materials.” Michigan: American Concrete Institute, ACI 211.4R-08.
4. Aïtcin, P. C., (1998). High-performance concrete. E&F SPON, London.
5. Ang, A. H. S. and Tang, W. H., (2006). Probability concepts in engineering. Wiley: Hoboken, N. J.
6. Behnood, A. and Ziari, H., (2008). “Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures.” Cement and Concrete Composites, 30(2), 106-112.10.1016/j.cemconcomp.2007.06.003 ↗
7. Box, G. E. P. and Tiao, G. C., (1992). Bayesian inference in statistical analysis. Addison-Wesley: Reading, Mass.10.1002/9781118033197 ↗
8. Brooks, J. J., Megat Johari, M. A., Mazloom, M., (2000). “Effect of admixtures on the setting times of high-strength concrete.” Cement and Concrete Composites, 22 (4), 293-301.10.1016/S0958-9465(00)00025-1 ↗
9. Fujikake, K., Senga, T., Ueda, N., Ohno, T., and Katagiri, M., (2006), “Effects of strain rate on tensile behavior of reactive powder concrete.” Journal of Advanced Concrete Technology, 4(1), 79-84.
10. Holland T. C., (1993). “High performance concrete.” Reprinted from Concrete Products. 1-3.
11. Hossain, A. B., Fonseka A., and Bullock H., (2008). “Early age stress development, relaxation, and cracking in restrained low W/B ultrafine fly ash mortars.” Journal of Advanced Concrete Technology, 6(2), 261-271.10.3151/jact.6.261 ↗
12. Jaturapitakkul, C., Kiattikomol, K., Sata, V. and Leekeeratikul, T., (2004). “Use of ground coarse fly ash as a replacement of condensed silica fume in producing high-strength concrete.” Cement and Concrete Research, 34(4), 549-555.10.1016/S0008-8846(03)00150-9 ↗
13. Kim, J. H. J., Phan, D. H., Yi, N. H., Kim, S. B., and Jeong, H. S., (2011). “Application of the one parameter Bayesian method as the PBMD for concrete mix proportion design.” Magazine Concrete Research, 63(1), 31-47.10.1680/macr.2011.63.1.31 ↗
14. Kim, J. H. J., Phan, D. H., Kim, B. Y., Choi, J. W. and Han, T. S., (2012). “Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method.” Construction and Building Materials, 27(1), 578-584.10.1016/j.conbuildmat.2011.07.005 ↗
15. Kimura, H., Ishikawa, Y., Kambayashi, A. and Takatsu, H., (2007). “Seismic behavior of 200 MPa ultra-high-strength steel-fiber reinforced concrete columns under varying axial load.” Journal of Advanced Concrete Technology, 5(2), 193-200.10.3151/jact.5.193 ↗
16. KS, (2000). “Method of test for flexural strength of concrete.” Seoul: Korea Standards Association, KS F 2408 (In Korean).
17. KS, (2005). “Method of test for compressive strength of concrete.” Seoul: Korea Standards Association, KS F 2405 (In Korean).
18. KS, (2006). “Method of test for splitting tensile strength of concrete.” Seoul: Korea Standards Association, KS F 2423 (In Korean).
19. KS, (2007). “Method of test for slump of concrete.” Seoul: Korea Standards Association, KS F 2402 (In Korean).
20. Matsuda, T., Kawakami, H., Koide, T. and Noguchi, T., (2009). “Development of Mechanical Properties of Ultra-High-Strength Concrete Subjected to Early Heat Curing.” Journal of Advanced Concrete Technology, 7(2), 183-193.10.3151/jact.7.183 ↗
21. Mazloom, M., (2008). “Estimating long-term creep and shrinkage of high-strength concrete.” Cement and Concrete Composites, 30(4), 316-326.10.1016/j.cemconcomp.2007.09.006 ↗
22. Mazloom, M., Ramezanianpour, A. A., and Brooks, J. J., (2004). “Effect of silica fume on mechanical properties of high-strength concrete.” Cement and Concrete Composites, 26(4), 347-357.10.1016/S0958-9465(03)00017-9 ↗
23. NRMCA, (2001). “CIP 33 - High strength concrete.” Maryland: National Ready Mixed Concrete Association.
24. Okamoto, M., Sato, T., Tanimura, Y., and Kuroiwa, T., (2004). “Experimental study on seismic performance verification method for RC members using high-strength materials.” Journal of Advanced Concrete Technology, 2(2), 223-231.10.3151/jact.2.223 ↗
25. Reinhardt, H. W. and Rinder, T., (2006). “Tensile Creep of High-Strength Concrete.” Journal of Advanced Concrete Technology, 4(2), 277-283.10.3151/jact.4.277 ↗
26. Sakai, E., Ishida, A. and Ohta, A., (2006). “New trends in the development of chemical admixtures in Japan.” Journal of Advanced Concrete Technology, 4(2), 211-223.10.3151/jact.4.211 ↗
27. Shannag, M. J., (2000). “High strength concrete containing natural pozzolan and silica fume.” Cement and Concrete Composites, 22(6), 399-406.10.1016/S0958-9465(00)00037-8 ↗
28. Sharma, U. K., Bhargava, P., Singh, S. P. and Kaushik, S. K., (2007). “Confinement reinforcement design for plain and fibre reinforced high strength concrete columns.” Journal of Advanced Concrete Technology, 5(1), 113-127.10.3151/jact.5.113 ↗
29. Shinozuka, M., Feng, M. Q., Lee, J. H. and Naganuma, T., (2000). “Statistical analysis of fragility curves.” Journal of Engineering Mechanic, 126(12), 1224-1231.10.1061/(ASCE)0733-9399(2000)126:12(1224) ↗
30. Singhal, A. and Kiremidjian, A. S., (1996). “Method for probabilistic evaluation of seismic structural damage.” Journal of Structural Engineering, 122(12), 1459-1467.10.1061/(ASCE)0733-9445(1996)122:12(1459) ↗
31. Singhal, A. and Kiremidjian, A. S., (1998). “Bayesian updating of fragilities with application to RC frames.” Journal of Structural Engineering, 124(8), 922-929.10.1061/(ASCE)0733-9445(1998)124:8(922) ↗
32. Spekkink, D., (2005). Performance based building. Report of EC 5th Framework.
33. Sui, T., Fan, L., Wen, Z., Wang J. and Zhang Z., (2004). “Study on the properties of high strength concrete using high belite cement.” Journal of Advanced Concrete Technology, 2(2), 201-206.10.3151/jact.2.201 ↗
34. Tanimura, M., Sato, R. and Hiramatsu, Y., (2007). “Serviceability performance evaluation of RC flexural members improved by using low-shrinkage high-strength concrete.” Journal of Advanced Concrete Technology, 5(2), 149-160.10.3151/jact.5.149 ↗
35. Walraven, J., (2009). “High Performance Concrete: a Material with a Large Potential.” Journal of Advanced Concrete Technology, 7(2), 145-156.10.3151/jact.7.145 ↗