Lightweight Aggregate Self-Compacting Concrete: State-of-the-Art & Pumice Application
Source abstract
Abstract
The scope of this study is twofold: first to present the current state-of-knowledge on lightweight aggregate self-compacting concrete (LWASCC) and second to discuss the development of pumice aggregate self-compacting concrete (PASCC) falling in the LC20/22 strength class and D1.4 density class (as per EN 206-1). Former studies have showed that the commonly accepted range of values derived from fresh-state tests on normal weight self-compacting concrete (NWSCC) is also attainable for LWASCC, the majority of which is produced using artificial lightweight aggregates. The second part of the paper presents the findings of an experimental program that aimed to assess the effect of coarse-to-fine pumice aggregates ratio on the rheological and mechanical properties of PASCC. Based on the results of this study it is verified that properly designed PASCC mixtures with a dry density in the order of 1400 kg/m3 may be evaluated while in fresh state using the same test methods applicable for normal weight self-compacting concrete (NWSCC) and yield scores that lie within the commonly accepted ranges. If pumice aggregates are introduced in the mix in a saturated state, PASCC exhibits self-compactness similar to the one typically characterizing most NWSCC mixtures. Surface coating of fine and coarse pumice aggregates - though difficult in practice - improves workability and prolongs its retention.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete Properties and Behavior · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Structural Materials Laboratory, Civil Engineering Department, University of Patras, Greece.
References (40)
Show source-provided references
1. ACI (American Concrete Institute) 213R-03, (2003). “Guide for Structural Lightweight-Aggregate Concrete.” American Concrete Institute. Farmington Hills, Michigan.
2. Choi, Y. W., Kim, Y. J., Shin, H. C. and Moon, H. Y., (2006). “An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete.” Cement and Concrete Research, 36, 1596-1602.
3. Domone, P. L., (2006). “Self-compacting concrete: An analysis of 11 years of case studies.” Cement and Concrete Composites, 28, 197-208.10.1016/j.cemconcomp.2005.10.003 ↗
4. EFNARC, (2005). “The European Guidelines for Self-compacting Concrete (online).” Available from: ‹http://www.efnarc.org/pdf/SCCGuidelinesMay2005.pdf› (Accessed 14 June 2010).
5. EN 12350-8, “Testing fresh concrete. Part 8. Self-compacting concrete. Slump-flow test.” European Committee for Standardization.
6. EN 12350-9, “Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test.” European Committee for Standardization.
7. EN 12350-10, “Testing fresh concrete - Part 10: Self-compacting concrete - L-box test.” European Committee for Standardization.
8. EN 1097-3:1998, “Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids.” European Committee for Standardization.
9. EN 1097-6:2000, “Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption.” European Committee for Standardization.
10. Haist, M., Mechtcherine, V., Beitzel, H. and Müller, H. S., (2003). “Retrofitting of building structures using pumpable self-compacting lightweight concrete.&rdquo
11. In: O. Wallevik and I. Nielsson, Eds. International RILEM Symposium on Self-Compacting Concrete, Reykjavik 17-20 August 2003. RILEM Publications S.A.R.L., 776-785.
12. Hubertova, M. and Hela, R., (2007). “The effect of metakaolin and silica fume on the properties of lightweight self-consolidating concrete.&rdquo
13. In: V. M. Malhotra Ed. 9th Canmet/ACI International Conference on Recent Advances in Concrete Technology, Warsaw 20-25 May 2007. SP-243, American Concrete Institute, 35-48.
14. Hwang, C. L. and Hung, M. F., (2005). “Durability design and performance of self-consolidating lightweight concrete.” Construction and Building Materials, 19, 619-626.10.1016/j.conbuildmat.2005.01.003 ↗
15. Illinois Department of Transportation, (2005). “Standard Test Method for Static Segregation of Hardened Self-Consolidating Concrete Cylinders.” Illinois Test Procedure SCC-6. Illinois Department of Transportation, Peoria, IL, 2005.
16. Kim, Y. J., Choi, Y. W. and Lachemi, M., (2010). “Characteristics of self-consolidating concrete using two types of lightweight coarse aggregate.” Construction and Building Materials, 24, 11-16.10.1016/j.conbuildmat.2009.08.004 ↗
17. Koehler, E. P. and Fowler, D. W., (2007). “Aggregates in self-consolidating concrete.” Final report ICAR project 108: Aggregates in self-consolidating concrete. Aggregates Foundation for Technology, Research, and Education (AFTRE), International Center for Aggregates Research (ICAR), The University of Texas at Austin, March 2007. Available from: ‹http://www.icar.utexas.edu/publications/108/ICAR%20108-2F%20(Final%20Report).pdf› (Accessed 10 January 2011).
18. Kwan, A. K H. and Fung, W. W. S., (2009). “Packing density measurement and modelling of fine aggregate and mortar.” Cement & Concrete Composites, 31, 349-357.10.1016/j.cemconcomp.2009.03.006 ↗
19. Lachemi, M., Bae., S., Hossain, K. M. A. and Sahmaran, M., (2009). “Steel-concrete bond strength og lightweight self-consolidatign concrete.” Materials and Structures 42, 1015-1023.10.1617/s11527-008-9440-4 ↗
20. Lo, T. Y., Tang, P. W. C, Cui, H. Z. and Nadeem, A., (2007). “Comparison of workability and mechanical properties of self-compacting lightweight concrete and normal self-compacting concrete.” Materials Research Innovations, 11(1), 45-50.10.1179/143307507X196239 ↗
21. Maage, M. and Smeplass, S., (2000). “Structural LWAC. Specification and Guideline for Materials and Production.&rdquo
22. In: S. Helland, I. Holand and S. Smeplass, Eds. 2nd International Symposium on Structural Lightweight Aggregate Concrete, Kristiansand, 18-22 June 2000. Norwegian Concrete Association, 802-810.
23. Mechtcherine, V., Haist, M., Hewener, A. and Müller, H. S., (2001). “Self-compacting lightweight concrete - A new high-performance building material.&rdquo
24. In: K. Ozawa and M. Ouchi Eds. 2nd International Symposium on Self-Compacting Concrete, 23-25 October 2001. COMS Engineering Corporation, 21-28.
25. Müller, S. H. and Haist, M., (2004). “Self-compacting lightweight concrete.” Betonwerk und Fertigteil-Technik, 12/2004, 8-17.
26. Newman, J. B., (1993). “Properties of structural lightweight concrete.” In: J. L. Clarke Ed. Structural Lightweight Concrete. London: Chapman & Hall, 1-17.
27. Okamura, H. and Ozawa, K., (1995). “Mix design for self-compacting concrete.” Concrete Library of Japan Society of Civil Engineers, 25, 107-120.
28. Papanicolaou, C. and Kaffetzakis, M., (2009). “Pumice aggregate self-compacting concrete (PASCC). In: 16th Conference on Concrete, Paphos 21-23 October 2009. Technical Chamber of Greece, (CD).” (in Greek)
29. Shi, C. and Yang, X., (2005). “Design and application of self-consolidating lightweight concretes.&rdquo10.1617/2912143624.005 ↗
30. In: Z. Yu, C. Shi, K. H. Khayat and Y. Xie Eds. 1st International Symposium on Design Performance and Use of Self-Compacting Concrete - SCC'2005, Changsha 26-28 May 2005. RILEM PUBLICATIONS S.A.R.L., 55-64.
31. Shi, C. and Wu, Y., (2005). “Mixture proportioning and properties of self-consolidating lightweight concrete containing glass powder.” ACI Materials Journal, 102(5), 355-363.
32. Shi, C., Wu, Y. and Riefler, C., (2006). “Self-consolidating lightweight concrete. A field demonstration using insulating concrete forms.” Concrete International, 28, 40-43.
33. Topçu, I. B. and Uygunoglu, T., (2010). “Effect of aggregate type on properties of hardened self-consolidatign lightweight concrete (SCLC).” Construction and Building Materials, 24, 1286-1295.
34. Uygunoglu, T. and Topçu, I. B., (2009). “Thermal expansion of self-consolidating normal and lightweight concrete at elevated temperature.” Construction and Building Materials, 23, 3063-3069.10.1016/j.conbuildmat.2009.04.004 ↗
35. Wang, H. Y., (2009). “Durability of self-consolidating lightweight aggregate concrete using dredged silt.”.Construction and Building Materials, 23, 2332-2337.10.1016/j.conbuildmat.2008.11.006 ↗
36. Weigler, H., Karl, S. and Lieser, P., (1972). “The bending load capacity of reinforced lightweight concrete.” Betonwerk und Fertigteil-Technik, 38(5), 324-334.
37. Wu, Z., Zhang, Y., Zheng, J. and Ding, Y., (2009). “An experimental study on the workability of self-compacting lightweight concrete.” Construction and Building Materials, 23, 2087-2092.10.1016/j.conbuildmat.2008.08.023 ↗
38. Yanai, S., Sakata, N., Nobuta, Y. and Okamoto, T., (1999). “Study on mix proportion for self compacting high performance lightweight aggregate concrete.&rdquo10.2208/jscej.2000.648_23 ↗
39. In: S. Helland, I. Holand and S. Smeplass, Eds. 2nd International Symposium on Structural Lightweight Aggregate Concrete, Kristiansand, 18-22 June 2000. Norwegian Concrete Association, 705-716.
40. Yao, S. X. and Gerwick, B. C., (2006). “Development of Self-Compacting Lightweight Concrete for RFP Reinforced Floating Concrete Structures (online).” Available from: ‹http://www.gerwick.com/PDF/self-compacting_concrete.pdf› (Accessed 14 June 2010).