Enhanced giant dielectric properties and improved nonlinear electrical response in acceptor-donor (Al3+, Ta5+)-substituted CaCu3Ti4O12 ceramics

Abstract The giant dielectric behavior of CaCu₃Ti₄O₁₂ (CCTO) has been widely investigated owing to its potential applications in electronics; however, the loss tangent (tanδ) of this material is too large for many applications. A partial substitution of CCTO ceramics with either Al³⁺ or Ta⁵⁺ ions generally results in poorer nonlinear properties and an associated increase in tanδ (to ~0.29–1.15). However, first-principles calculations showed that self-charge compensation occurs between these two dopant ions when co-doped into Ti⁴⁺ sites, which can improve the electrical properties of the grain boundary (GB). Surprisingly, in this study, a greatly enhanced breakdown electric field (~200–6588 V/cm) and nonlinear coefficient (~4.8–15.2) with a significantly reduced tanδ (~0.010–0.036) were obtained by simultaneous partial substitution of CCTO with acceptor-donor (Al³⁺, Ta⁵⁺) dopants to produce (Al³⁺, Ta⁵⁺)-CCTO ceramics. The reduced tanδ and improved nonlinear properties were attributed to the synergistic effects of the co-dopants in the doped CCTO structure. The significant reduction in the mean grain size of the (Al³⁺, Ta⁵⁺)-CCTO ceramics compared to pure CCTO was mainly because of the Ta⁵⁺ ions. Accordingly, the increased GB density due to the reduced grain size and the larger Schottky barrier height (Φ_b) at the GBs of the co-doped CCTO ceramics were the main reasons for the greatly increased GB resistance, improved nonlinear properties, and reduced tanδ values compared to pure and single-doped CCTO. In addition, high dielectric constant values (ε′ ≈ (0.52–2.7) × 10⁴) were obtained. A fine-grained microstructure with highly insulating GBs was obtained by Ta⁵⁺ doping, while co-doping with Ta⁵⁺ and Al³⁺ resulted in a high Φ_b. The obtained results are expected to provide useful guidelines for developing new giant dielectric ceramics with excellent dielectric properties.