Facile fabrication of cordierite-based porous ceramics with magnetic properties
Source abstract
Abstract
Abstract In this paper, cordierite-based porous ceramics with magnetic properties have been firstly in-situ synthesized by using MgO, Al2O3, and SiO2 powders as raw materials and Fe3O4 as a functional additive. Combining with the foam freeze casting method, near net size fabrication (total linear shrinkage < 2.86%) of the magnetic porous materials was realized by adjusting the amount of Fe3O4. The porosity, compressive strength, and saturation magnetization of the prepared materials were 83.9%–87.8%, 1.51–2.65 MPa, and 1.2–5.8 emu/g, respectively. The phase composition and microstructure evolutions during sintering were investigated briefly. The results showed that the synthesis temperature of cordierite was lowered about 100 °C due to the addition of Fe3O4. Except for the main phase-cordierite, Mg—Al—Fe spinel and α-Fe2O3 also existed in the final materials. The lattice parameters of the Mg—Al—Fe spinel and the amount of α-Fe2O3 changed obviously with the change in the sintering temperature and Fe3O4 amount, which mainly influenced the magnetic properties of the prepared materials. Thus, a facile fabrication method of the cordierite-based porous ceramics with the magnetic properties has been put forward in this paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Senguttuvan TD, Kalsi HS, Sharda SK, et al. Sintering behavior of alumina rich cordierite porous ceramics. Mater Chem Phys 2001, 67: 146–150.10.1016/S0254-0584(00)00432-6 ↗
2. Du YF, Wen BL, Shu RL, et al. Potassium titanate whiskers on the walls of cordierite honeycomb ceramics for soot catalytic combustion. Ceram Int 2021, 47: 34828–34835.10.1016/j.ceramint.2021.09.023 ↗
3. Mohamed Shamshuddin SZ, Sundar MS, Thimmaraju N, et al. Synthesis, characterization and catalytic activity studies on cordierite honeycomb coated with ZrO2 based solid super acids. Comptes Rendus Chimie 2012, 15: 799–807.10.1016/j.crci.2012.05.020 ↗
4. Zhou TQ, Li LD, Cheng J, et al. Preparation of binary washcoat deposited on cordierite substrate for catalytic applications. Ceram Int 2010, 36: 529–534.10.1016/j.ceramint.2009.09.027 ↗
5. Yao Y, Ochiai T, Ishiguro H, et al. Antibacterial performance of a novel photocatalytic-coated cordierite foam for use in air cleaners. Appl Catal B 2011, 106: 592–599.10.1016/j.apcatb.2011.06.020 ↗
6. Liu J, Dong YC, Dong XF, et al. Feasible recycling of industrial waste coal fly ash for preparation of anorthite-cordierite based porous ceramic membrane supports with addition of dolomite. J Eur Ceram Soc 2016, 36: 1059–1071.10.1016/j.jeurceramsoc.2015.11.012 ↗
7. Zhang XZ, Fang DR, Lin B, et al. Asymmetric porous cordierite hollow fiber membrane for microfiltration. J Alloys Compd 2009, 487: 631–638.10.1016/j.jallcom.2009.08.028 ↗
8. Parlak TT, Demirkiran AS. Zeolite usage as source of silica to produce cordierite in MgO—Al2O3—SiO2 system. J Adv Ceram 2018, 7: 370–379.10.1007/s40145-018-0288-y ↗
9. Wang LL, Ma BY, Ren XM, et al. Phase-engineering strategy of ZrO2 for enhancing the mechanical properties of porous cordierite ceramics. Mater Today Commun 2022, 30: 103032.10.1016/j.mtcomm.2021.103032 ↗
10. Li H, Li CW, Wu LH. Porous cordierite ceramics prepared by foam-gelcasting technique: Phase evolution and properties. J Alloys Compd 2019, 791: 690–699.10.1016/j.jallcom.2019.03.225 ↗
11. Vakalova TV, Pogrebenkov VM, Revva IB, et al. Effect of fluorine-containing additive on the synthesis and sintering of compositions from natural raw materials in the “cordierite—mullite” system. Ceram Int 2019, 45: 9695–9703.10.1016/j.ceramint.2019.02.079 ↗
12. Wang WB, Shi ZM, Wang XG, et al. The phase transformation and thermal expansion properties of cordierite ceramics prepared using drift sands to replace pure quartz. Ceram Int 2016, 42: 4477–4485.10.1016/j.ceramint.2015.11.135 ↗
13. Ogiwara T, Noda Y, Shoji K, et al. Solid state synthesis and its characterization of high density cordierite ceramics using fine oxide powders. J Ceram Soc Jpn 2010, 118: 246–249.10.2109/jcersj2.118.246 ↗
14. Li Y, Cheng XD, Zhang RF, et al. Effect of excess MgO on the properties of cordierite ceramic sintered by solid-state method. Int J Appl Ceram Technol 2015, 12: 443–450.10.1111/ijac.12174 ↗
15. Guo W, Lu HB, Feng CX. Influence of La2O3 on preparation and performance of porous cordierite from rice husk. J Rare Earths 2010, 28: 614–617.10.1016/S1002-0721(09)60165-4 ↗
16. Senthil Kumar M, Elaya Perumal A, Vijayaram TR. Synthesis, characterization and sintering behavior influencing mechanical, thermal and physical properties of pure cordierite and cordierite-ceria. J Adv Ceram 2015, 4: 22–30.10.1007/s40145-015-0127-3 ↗
17. Ren XM, Ma BY, Zhang YR, et al. Effects of sintering temperature and V2O5 additive on the properties of SiC—Al2O3 ceramic foams. J Alloys Compd 2018, 732: 716–724.10.1016/j.jallcom.2017.10.170 ↗
18. Li Y, Zhao HZ. Effect of Fe2O3 addition on sintering behavior of cordierite ceramic obtained by solid-state sintering method. J Aust Ceram Soc 2019, 55: 567–574.10.1007/s41779-018-0263-7 ↗
19. Lu AH, Schmidt W, Matoussevitch N, et al. Nanoengineering of a magnetically separable hydrogenation catalyst. Angew Chem Int Ed Engl 2004, 43: 4303–4306.10.1002/anie.200454222 ↗
20. Wang LX, Guan YK, Qiu X, et al. Efficient ferrite/Co/porous carbon microwave absorbing material based on ferrite@metal-organic framework. Chem Eng J 2017, 326: 945–955.10.1016/j.cej.2017.06.006 ↗
21. Yang SD, Chen L, Mu L, et al. Magnetic graphene foam for efficient adsorption of oil and organic solvents. J Colloid Interface Sci 2014, 430: 337–344.10.1016/j.jcis.2014.05.062 ↗
22. Ling L, Zhang WX. Enrichment and encapsulation of uranium with iron nanoparticle. J Am Chem Soc 2015, 137: 2788–2791.10.1021/ja510488r ↗
23. Borlido L, Azevedo AM, Roque ACA, et al. Magnetic separations in biotechnology. Biotechnol Adv 2013, 31: 1374–1385.10.1016/j.biotechadv.2013.05.009 ↗
24. Peretyat’ko PI, Kulikov LA, Melikhov IV, et al. Magnetic porous composite material: Synthesis and properties. Tech Phys Lett 2015, 41: 974–976.10.1134/S1063785015100260 ↗
25. Qi X, Zhou X, Shu D, et al. Effect of porous structure on the magnetic properties of NixMgyZn1−x−yFe2O4 magnetic materials. Chin Phys Lett 2011, 28: 107502.10.1088/0256-307X/28/10/107502 ↗
26. Wang JN, Novaro O, Li CL. Mössbauer spectroscopy and X-ray diffraction studies of Mg—Al—Fe—O mixed spinel sulphur transfer catalysts. J Mater Sci 1998, 33: 3671–3676.10.1023/A:1004623916816 ↗
27. Lee CC, Yoshikawa N, Taniguchi S. Microwave-induced substitutional-combustion reaction of Fe3O4/Al ceramic matrix porous composite. J Mater Sci 2011, 46: 7004–7011.10.1007/s10853-011-5669-3 ↗
28. Sandeep Kumar TK, Viswanathan NN, Ahmed HM, et al. Estimation of sintering kinetics of magnetite pellet using optical dilatometer. Metall Mater Trans B 2016, 47: 309–319.10.1007/s11663-015-0505-9 ↗
29. Huang YM, Zhai BG, Ma QL, et al. Magnetic properties of ferrous ferric oxide confined in porous silicon. Mater Sci Forum 2010, 663–665: 1142–1145.10.4028/www.scientific.net/MSF.663-665.1142 ↗
30. Tan P, Jiang Y, Liu XQ, et al. Magnetically responsive porous materials for efficient adsorption and desorption processes. Chin J Chem Eng 2019, 27: 1324–1338.10.1016/j.cjche.2018.11.004 ↗
31. Wang S. Effects of Fe on crystallization and properties of a new high infrared radiance glass-ceramics. Environ Sci Technol 2010, 44: 4816–4820.10.1021/es1003268 ↗
32. Li H, Li JW, Li CW, et al. Near net shape fabrication of porous cordierite by combination of foam gel-casting and freeze-drying. Int J Appl Ceram Technol 2021, 18: 2121–2131.10.1111/ijac.13845 ↗
33. Li CW, Han Y, Wu LH, et al. Synthesis and growth of anorthite crystal during in situ preparation of porous anorthite ceramics by foam-gelcasting. Int J Appl Ceram Technol 2017, 14: 957–962.10.1111/ijac.12727 ↗
34. Wu WQ, Ruan YZ, Yu Y. Influence of Fe2O3 impurity on the crystalline structure of cordierite synthesized from waste aluminum slag. Chinese J Struc Chem 2005, 24: 483–487.
35. Koepke J, Schulz H. Single crystal structure investigations under high-pressure of the mineral cordierite with an improved high-pressure cell. Phys Chem Miner 1986, 13: 165–173.10.1007/BF00308159 ↗
36. Cheng JJ. Reaction of Mg—Cr spinel with iron oxide in solid phase. J Chin Ceram Soc 1965, 4: 30–42. (in Chinese)
37. De Vekey RC, Majumdar AJ. Nucleation and crystallization studies of some glasses in the CaO—MgO—Al2O3—SiO2 system. Mineral Mag 1970, 37: 771–779.10.1180/minmag.1970.037.291.03 ↗
38. Li H, Li CW, Wu LH, et al. Near net size sintering of porous cordierite ceramics with excellent properties. J Alloys Compd 2020, 826: 154121.10.1016/j.jallcom.2020.154121 ↗
39. Wang SX, Wang H, Chen ZW, et al. Fabrication and characterization of porous cordierite ceramics prepared from fly ash and natural minerals. Ceram Int 2019, 45: 18306–18314.10.1016/j.ceramint.2019.06.043 ↗
40. Li X, Li YB, Xiang RF, et al. Effect of dispersion viscosity on microstructure of cordierite foam prepared by thermo-foaming. Ceram Int 2019, 45: 24487–24492.10.1016/j.ceramint.2019.08.174 ↗
41. Gibson LJ, Ashby MF. Cellular Solids. Cambridge: Cambridge University Press, 1997.10.1017/CBO9781139878326 ↗
42. Cao M, Liu T, Gao S, et al. Single-crystal dendritic micro-pines of magnetic α-Fe2O3: Large-scale synthesis, formation mechanism, and properties. Angew Chem Int Ed Engl 2005, 44: 4197–4201.10.1002/anie.200500448 ↗
43. Krause T, Molotnikov A, Carlesso M, et al. Mechanical properties of topologically interlocked structures with elements produced by freeze gelation of ceramic slurries. Adv Eng Mater 2012, 14: 335–341.10.1002/adem.201100244 ↗
44. Li H, Li CW, Wu LH, et al. In-situ synthesis and properties of porous cordierite ceramics with adjustable pore structure. Ceram Int 2020, 46: 14808–14815.10.1016/j.ceramint.2020.03.005 ↗