journal article·2020-12

Electron beam melted heterogeneously porous microlattices for metallic bone applications: Design and investigations of boundary and edge effects

Pan Wang, Xinwei Li, Yue Jiang, Mui Ling Sharon Nai, Jun Ding, Jun Wei

Publisher page

Abstract

Abstract A successful implant requires compatible mechanical properties. Herein, microlattice models with bone-like mechanical properties (compressive strengths of 169.5–250.9 MPa, Young’s modulus of 14.7–25.3 GPa) and high porosity (up to ∼ 60%) are designed and investigated through finite element modelling and electron beam additive manufacturing fabrication. Microlattices are designed to be hetero-porous, with large pores for nutrients flow and small pores for cell seeding. Size and boundary effects (3 × 3×6, 4 × 4×8 to 5 × 5×10) are studied of which revealed to affect the as-built mechanical properties via geometrical defects, generally deviating from that of modelling. The high proportion of increased nodals masses for fine features is found to greatly increase mechanical properties via the redistribution of stress concentrations. The effects of bounding edge additions to the lattices are also investigated, up to a 45% and 25% increase in strength and Young’s modulus are respectively observed with a minimal increase in relative density of 4%, a large increase exceeding the modelled Gibson-Ashby trends. Mechanisms result from both the reduced fabrication defects and evenly distributed stress distributions are revealed by finite element analysis. The method allows effective enhancement of build qualities with retained pore sizes and porosities, which paves a new way for designing of microlattice with enhanced properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
2. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review10.1016/j.biomaterials.2016.01.012 ↗
3. Problem of stress shielding and improvement to the hip implant designs: a review10.3923/jms.2007.460.467 ↗
4. Microstructure and mechanical properties of a newly developed low Young’s modulus Ti–15Zr–5Cr–2Al biomedical alloy10.1016/j.msec.2016.11.101 ↗
5. Beta titanium single crystal with bone-like elastic modulus and large crystallographic elastic anisotropy10.1016/j.jallcom.2018.12.236 ↗
6. Fully porous 3D printed titanium femoral stem to reduce stress‐shielding following total hip arthroplasty10.1002/jor.23445 ↗
7. Beautiful and functional: a review of biomimetic design in additive manufacturing
8. Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups
9. Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants
10. Heterogeneously tempered martensitic high strength steel by selective laser melting and its micro-lattice: processing, microstructure, superior performance and mechanisms10.1016/j.matdes.2019.107881 ↗
11. Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
12. Effects of topographical surface modifications of electron beam melted Ti‐6Al‐4V titanium on human fetal osteoblasts10.1002/jbm.a.31540 ↗
13. In vivo performance of selective electron beam‐melted Ti‐6Al‐4V structures10.1002/jbm.a.32337 ↗
14. Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting10.1016/j.jallcom.2018.12.220 ↗
15. Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method10.1016/j.actbio.2014.06.010 ↗
16. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
17. High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints10.1016/j.actbio.2015.10.048 ↗
18. Isotropic Ti–6Al–4V lattice via topology optimization and electron-beam melting
19. Bone tissue regeneration: the role of scaffold geometry10.1039/C4BM00291A ↗
20. Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics10.1039/C8RA04815K ↗
21. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: an in vivo experiment10.1016/j.msec.2015.10.069 ↗
22. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering10.1089/ten.tec.2008.0288 ↗
23. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting10.1016/j.actbio.2011.01.037 ↗
24. Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes10.1016/j.jmbbm.2018.04.010 ↗
25. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials10.1016/j.actbio.2018.12.013 ↗
26. Effect of the fiber diameter and porosity of non-woven PET fabrics on the osteogenic differentiation of mesenchymal stem cells10.1163/156856204322752228 ↗
27. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds10.1016/j.actbio.2012.04.001 ↗
28. Metallic microlattice and epoxy interpenetrating phase composites: Experimental and simulation studies on superior mechanical properties and their mechanisms10.1016/j.compositesa.2020.105934 ↗
29. Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: simulations & experiments10.1016/j.jmps.2018.08.022 ↗
30. Optimal lattice-structured materials10.1016/j.jmps.2016.07.010 ↗
31. Foam topology: bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
32. Realizing a full volume component by in-situ welding during electron beam melting process
33. Effects of processing parameters on surface roughness of additive manufactured Ti-6Al-4V via electron beam melting10.3390/ma10101121 ↗
34. Effect of overlap distance on the microstructure and mechanical properties of in situ welded parts built by electron beam melting process10.1016/j.jallcom.2018.09.093 ↗
35. Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component10.1016/j.matdes.2016.01.093 ↗
36. Heterogeneities dominate mechanical performance of additively manufactured metal lattice struts
37. Study of direct fabrication of a Ti-6Al-4V impeller on a wrought Ti-6Al-4V plate by Electron beam melting10.1007/s11837-017-2610-5 ↗
38. Experimental analysis of additively manufactured component and design guidelines for lightweight structures: a case study using electron beam melting
39. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗
40. Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes10.1016/j.matdes.2018.06.010 ↗
41. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading10.1016/j.actamat.2016.05.054 ↗
42. Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams10.1016/j.ijmecsci.2018.03.027 ↗
43. Design of metallic bone by additive manufacturing10.1016/j.scriptamat.2019.01.022 ↗
44. Additively manufactured heterogeneously porous metallic bone with biostructural functions and bone-like mechanical properties10.1016/j.jmst.2020.05.056 ↗
45. Smooth-shell metamaterials of cubic symmetry: anisotropic elasticity, yield strength and specific energy absorption10.1016/j.actamat.2018.10.034 ↗
46. Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting10.1016/j.actbio.2016.10.005 ↗
47. Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants10.1016/j.actbio.2017.09.013 ↗
48. Variability and anisotropy of mechanical behavior of cortical bone in tension and compression