journal article·2023-06-11Open access

Experimental and numerical study of rate-dependent mode-I failure of a structural adhesive

Leo Škec, Giulio Alfano

The Journal of Adhesion· Volume 99· Issue 8

Abstract

We present an experimental and numerical study of the rate dependence of the mode-I failure of adhesive joints, focussing on aluminium plates bonded with Araldite 2015. For the experimental part, we tested 24 double-cantilever beams (DCB) at six different prescribed speeds, from 0.1 to 5000 mm/ min. The numerical simulations use a previously proposed cohesive-zone model (CZM) based on fractional viscoelasticity and a novel finite element combining a Timoshenko beam and an interface element. The CZM had previously been validated for a rubber interface, so here we present a procedure to identify its input parameters and validate its capability to predict the failure of joints made with an epoxy adhesive. An effective procedure is also developed to evaluate the dependence of the fracture energy on the crack speed without experimentally measuring the crack speed. The adhesive response was found to be markedly rate dependent. Within the range of tested speeds, the fracture energy of the adhesive more than doubles its value and the shape of the 'fracture energy-crack speed' curve resembles a sigmoidal shape, but more tests are needed at higher speeds to better determine the maximum value of the fracture energy and the actual shape of the complete curve.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Civil Engineering, University of Rijeka, Rijeka, Croatia

Department of Mechanical and Aerospace Engineering, Brunel University London, Uxbridge, UK

Funding

European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie

References (42)

Show source-provided references
1. 10.1080/00218464.2015.109238710.1080/00218464.2015.1092387 ↗
2. 10.1080/00218464.2017.128234910.1080/00218464.2017.1282349 ↗
3. 10.1140/epjst/e2018-00070-x10.1140/epjst/e2018-00070-x ↗
4. 10.1016/j.jmps.2019.06.01110.1016/j.jmps.2019.06.011 ↗
5. 10.1016/j.ijimpeng.2019.10347910.1016/j.ijimpeng.2019.103479 ↗
6. 10.1016/j.engfracmech.2009.07.01310.1016/j.engfracmech.2009.07.013 ↗
7. 10.1016/j.ijsolstr.2012.02.02210.1016/j.ijsolstr.2012.02.022 ↗
8. 10.1016/j.ijsolstr.2021.01.03410.1016/j.ijsolstr.2021.01.034 ↗
9. 10.1016/j.ijadhadh.2014.08.00110.1016/j.ijadhadh.2014.08.001 ↗
10. 10.1016/j.compositesa.2015.10.03310.1016/j.compositesa.2015.10.033 ↗
11. 10.1016/j.compositesb.2019.10716110.1016/j.compositesb.2019.107161 ↗
12. 10.1016/j.tafmec.2020.10250810.1016/j.tafmec.2020.102508 ↗
13. 10.1016/j.engfracmech.2019.10684010.1016/j.engfracmech.2019.106840 ↗
14. 10.1016/S0020-7683(00)00088-310.1016/S0020-7683(00)00088-3 ↗
15. 10.1023/A:100769311611610.1023/A:1007693116116 ↗
16. 10.1016/S0143-7496(02)00063-510.1016/S0143-7496(02)00063-5 ↗
17. 10.1016/j.compstruc.2012.12.02010.1016/j.compstruc.2012.12.020 ↗
18. 10.1002/nme.488510.1002/nme.4885 ↗
19. 10.1061/(ASCE)EM.1943-7889.000120310.1061/(ASCE)EM.1943-7889.0001203 ↗
20. 10.1016/j.engfracmech.2017.12.01610.1016/j.engfracmech.2017.12.016 ↗
21. 10.1016/j.cma.2020.11349410.1016/j.cma.2020.113494 ↗
22. 10.1007/s10704-018-00334-w10.1007/s10704-018-00334-w ↗
23. 10.1016/j.compositesb.2018.11.09910.1016/j.compositesb.2018.11.099 ↗
24. 10.1016/j.compscitech.2008.04.00310.1016/j.compscitech.2008.04.003 ↗
25. 10.1016/j.engfracmech.2020.10708210.1016/j.engfracmech.2020.107082 ↗
26. 10.1016/j.ijsolstr.2018.04.02010.1016/j.ijsolstr.2018.04.020 ↗
27. BS ISO 25217:2009 · 2009
28. ASTM D3433 - 99(2020) · 2020
29. 10.1002/nme.493910.1002/nme.4939 ↗
30. Crisfield M. A · 1986 · 1
31. 10.1007/BF0003428110.1007/BF00034281 ↗
32. 10.1016/j.engfracmech.2019.04.01910.1016/j.engfracmech.2019.04.019 ↗
33. BS 7991:2001 · 2001
34. 10.1016/j.engfracmech.2017.03.04410.1016/j.engfracmech.2017.03.044 ↗
35. 10.1016/j.engfracmech.2019.10660710.1016/j.engfracmech.2019.106607 ↗
36. 10.1186/s40563-015-0056-y10.1186/s40563-015-0056-y ↗
37. 10.1080/00218464.2015.107010110.1080/00218464.2015.1070101 ↗
38. 10.1016/j.engfracmech.2013.10.00510.1016/j.engfracmech.2013.10.005 ↗
39. Yahya, N. A. Failure Analysis of Bonded Steel/CFRP Laminate Connections. University of Glasgow, 2015. PhD thesis.
40. 10.1115/1.362504610.1115/1.3625046 ↗
41. 10.1007/s10704-018-0324-510.1007/s10704-018-0324-5 ↗
42. 10.1177/095440702095457210.1177/0954407020954572 ↗