journal article·1994-09

The Interphase in Rubber-Metal Moulding: The Influence on Adhesion of Sulphur-Containing Emulsifier Residues in Nitrile Rubber

M. Lotfipour, L. A. Reeves, D. Kiroski, D. E. Packham

The Journal of Adhesion· Volume 47· Issue 1-3
Publisher page

Abstract

Abstract When compounds based on nitrile rubber (NBR) are vulcanised in a mould a complex interfacial layer is formed at the surface of the mould. The components of the layer include vulcanisation and processing aids as well as residues of the NBR manufacturing process. When the moulding is removed parting occurs within the inter-layer; its constituents exert a dominant effect on the adhesion. Rubber-mould adhesion has been studied by measuring the mould sticking index with a TMS rheometer and investigating the surfaces formed by X-ray photoelectron spectroscopy. This paper is concerned with the effects of organic sulphonate or sulphate emulsifier residues, which are common constituents of the interphase. The adhesion has been measured of rubber compounds prepared with differing concentrations of sulphonates or sulphates included, and by use of rubber coagulated from latices stabilised with different emulsifiers. The presence of these residues generally increases adhesion, probably because of strong adsorption of the polar sulphoxy groups on the surface of the mould steel, producing an interfacial layer which is not easily sheared. In some experiments a tendency was observed for the adhesion to fall off at high sulphoxy residue concentration; this could be associated with weakness in shear of thicker layers of these compounds.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Roberts A. D. · 1988
2. Champaneria, R. K., Lotfipour, M., Packham, D. E., Brister, D. and Turner, D. M. 1988.Adhesion, Vol. 12, 69London & New York: Elsevier Appl. Sci. Publ.10.1007/978-94-009-1349-3_5 ↗
3. Reeves L. A. · Kautschuk & Gummi Kunststoffe · 1992 · 45 · 369
4. Turner, D. M. and Moore, M. D. 1980.Plast. and Rubber Processing81
5. Champaneria R. K. · Plast. and Rubber Processing and Applns. · 1987 · 8 · 185
6. 10.1002/sia.74017071910.1002/sia.740170719 ↗
7. 10.1088/0022-3727/25/1A/00410.1088/0022-3727/25/1A/004 ↗
8. Briggs D. · 1983
9. 10.1016/0378-5963(80)90082-310.1016/0378-5963(80)90082-3 ↗
10. Milner, P. W. 1987.Developments in Rubber Technology-4, Edited by: Whelan, A. and Lee, K. S. 57London and New York: Elsevier Appl. Sci. Publ.
11. Reeves, L. A. and Packham, D. E. to be published