journal article·2021-11Open access

Recycled cathode materials enabled superior performance for lithium-ion batteries

Xiaotu Ma, Mengyuan Chen, Zhangfeng Zheng, Dennis Bullen, Jun Wang, Chloe Harrison, Eric Gratz, Yulin Lin, Zhenzhen Yang, Youtian Zhang, Fan Wang, David Robertson, Seoung-Bum Son, Ira Bloom, Jianguo Wen, Mingyuan Ge, Xianghui Xiao, Wah-Keat Lee, Ming Tang, Qiang Wang, Jinzhao Fu, Yubin Zhang, Bryer C. Sousa, Renata Arsenault, Peter Karlson, Nakia Simon, Yan Wang

Joule· Volume 5· Issue 11

Abstract

Summary Recycling spent lithium-ion batteries plays a significant role in alleviating the shortage of raw materials and environmental problems. However, recycled materials are deemed inferior to commercial materials, preventing the industry from adopting recycled materials in new batteries. Here, we demonstrate that the recycled LiNi1/3Mn1/3Co1/3O2 has a superior rate and cycle performance, verified by various industry-level tests. Specifically, 1 Ah cells with the recycled LiNi1/3Mn1/3Co1/3O2 have the best cycle life result reported for recycled materials and enable 4,200 cycles and 11,600 cycles at 80% and 70% capacity retention, which is 33% and 53% better than the state-of-the-art, commercial LiNi1/3Mn1/3Co1/3O2. Meanwhile, its rate performance is 88.6% better than commercial powders at 5C. From experimental and modeling results, the unique microstructure of recycled materials enables superior electrochemical performance. The recycled material outperforms commercially available equivalent, providing a green and sustainable solution for spent lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Extraction and Separation Processes · Advancements in Battery Materials · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
2. Examining different recycling processes for lithium-ion batteries10.1038/s41893-019-0222-5 ↗
3. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
4. Recycling of mixed cathode lithium-ion batteries for electric vehicles: current status and future outlook10.1002/cey2.29 ↗
5. Recycling end-of-life electric vehicle lithium-ion batteries10.1016/j.joule.2019.09.014 ↗
6. A critical review and analysis on the recycling of spent lithium-ion batteries10.1021/acssuschemeng.7b03811 ↗
7. A redox targeting-based material recycling strategy for spent lithium ion batteries10.1039/C9EE01478K ↗
8. A critical review of lithium-ion battery recycling processes from a circular economy perspective10.3390/batteries5040068 ↗
9. A closed-loop process for recycling LiNi x Co y Mn (1−x−y) O2 from mixed cathode materials of lithium-ion batteries10.1016/j.gee.2016.11.010 ↗
10. A new method for the synthesis of LiNi1/3Co1/3Mn1/3O2 from waste lithium ion batteries10.1039/C4RA16390G ↗
11. Innovative application of acid leaching to regenerate Li(Ni1/3Co1/3Mn1/3)O2 cathodes from spent lithium-ion batteries10.1021/acssuschemeng.7b04373 ↗
12. Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes10.1016/j.wasman.2017.03.018 ↗
13. Process for recycling mixed-cathode materials from spent lithium-ion batteries and kinetics of leaching10.1016/j.wasman.2017.10.028 ↗
14. Sustainable recovery of cathode materials from spent lithium-ion batteries using lactic acid leaching system10.1021/acssuschemeng.7b00571 ↗
15. Direct regeneration of cathode materials from spent lithium iron phosphate batteries using a solid phase sintering method10.1039/C6RA27210J ↗
16. Renovation of LiCoO 2 with outstanding cycling stability by thermal treatment with Li 2 CO 3 from spent Li-ion batteries10.1016/j.est.2016.10.008 ↗
17. Synthesis of high performance LiNi 1/3 Mn 1/3 Co 1/3 O 2 from lithium ion battery recovery stream10.1016/j.jpowsour.2015.02.046 ↗
18. Synthesis of diverse LiNixMnyCozO2 cathode materials from lithium ion battery recovery stream10.1007/s40831-016-0052-x ↗
19. A closed loop process for recycling spent lithium ion batteries10.1016/j.jpowsour.2014.03.126 ↗
20. A novel method to recycle mixed cathode materials for lithium ion batteries10.1039/c3gc40182k ↗
21. High performance cathode recovery from different electric vehicle recycling streams10.1021/acssuschemeng.8b02405 ↗
22. Current and prospective Li-ion battery recycling and recovery processes10.1007/s11837-016-1994-y ↗
23. High-performance graphite recovered from spent lithium-ion batteries10.1021/acssuschemeng.9b05003 ↗
24. Systematic comparison of Al 3+ modified LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode material from recycling process10.1021/acsaem.9b01814 ↗
25. Insights into the inner structure of high-nickel agglomerate as high-performance lithium-ion cathodes10.1016/j.jpowsour.2016.09.068 ↗
26. High-voltage charging-induced strain, heterogeneity, and micro-cracks in secondary particles of a nickel-rich layered cathode material10.1002/adfm.201900247 ↗
27. Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗
28. Christophersen, J.P. (2014). U.S. department of energy vehicle technologies program: battery test manual for plug-in hybrid electric vehicles. https://doi.org/10.2172/1169249.10.2172/1169249 ↗
29. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries10.1038/s41563-020-0767-8 ↗
30. Controllable cathode–electrolyte interface of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 for lithium ion batteries: a review10.1002/aenm.201901597 ↗
31. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
32. Degradation mechanisms and mitigation strategies of nickel-rich NMC-based lithium-ion batteries10.1007/s41918-019-00053-3 ↗
33. Mesoscale chemomechanical interplay of the LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode in solid-state polymer batteries10.1021/acs.chemmater.8b04418 ↗
34. Simulation of crack behavior of secondary particles in Li-ion battery electrodes during lithiation/de-lithiation cycles10.1016/j.ijmecsci.2019.02.042 ↗
35. Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture10.1016/j.ensm.2020.01.027 ↗
36. Transition metal dissolution and deposition in Li-ion batteries investigated by operando X-ray absorption spectroscopy10.1039/C6TA08865A ↗
37. Unravelling the chemistry and microstructure evolution of a cathodic interface in sulfide-based all-solid-state Li-ion batteries10.1021/acsenergylett.9b01676 ↗
38. Schwieters · J. Power Sources · 2018 · 380 · 19410.1016/j.jpowsour.2018.01.088 ↗
39. Mesoscale battery science: the behavior of electrode particles caught on a multispectral X-ray camera10.1021/acs.accounts.8b00123 ↗
40. Visualization of anisotropic-isotropic phase transformation dynamics in battery electrode particles10.1038/ncomms12372 ↗
41. Two-dimensional lithium diffusion behavior and probable hybrid phase transformation kinetics in olivine lithium iron phosphate10.1038/s41467-017-01315-8 ↗
42. PyXAS - an open-source package for 2D X-ray near-edge spectroscopy analysis10.1107/S1600577520001071 ↗
43. TomoPy: a framework for the analysis of synchrotron tomographic data10.1107/S1600577514013939 ↗
44. A Modified Multiphysics model for lithium-ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode10.1016/j.electacta.2015.06.015 ↗